LOL...beta version

It has to be Genie Bios configuration. I'm not so fimiliar with UTT configuration since I sold my last UTT 3 months ago, maybe Baby or Evo can help.

New official 623.3 BIOS available over at DFI

Note this is NOT a beta.

Have flashed my mobo, stable. Can't comment on overclockability as I have yet to overclock the WorkRig. Been to busy actually working... for once....

http://forum.lowyat.net/index.php?showtopi...dpost&p=4319586

whoops

anyone using their hynix chips have flash to this new 6/23 bios?.....how's the oc performance?...i've pretty stable system with 310 bios...but i know that hynix dun ngam cun enough with dfi board..

got mod bios for ultra-D or not?

Mod bios?

lazy to check back the history ..
how the new BIOS compare to those old 1 ?
any personal experince ??

i was using 310, but then changed to 623-2 to take advantage of being able to use slots 1 and 3 running fine and stable also.

623-1 works well for me. Better than 510-1 and of course 310.

any chances bios 623 may enchance hynix chips performance?....

hmm...if tccd need flash which 1??

You can use either one, but -1 works best for me (TCC5). -2 works best for my TCCD.

i am newb in tccd...can i know wat the max fsb tat ur tccd can do it n wat vdim is good for tccd...

my corsair need 3.2v wen running 290*10 at 2.5-4-4-8
izzit to high for my vdim?

3.2V is a bit too high. I just need 2.8V to reach DDR600 on my OCZ Plat Rev.2 @ 2.5-4-3-7

Usually i use 2.8V + 0.3 enable

hmm i oso dunno y this tccd need 3.2v ler... any ideal?

List down your Genie Bios settings for me please.

fsb 300
ldt/fsb Auto
ldt/bus 16/16
cpu/fsb *10
pci 100mhz
cpu vid 1.450v
cpu vid special *123%
ldt 1.50v
chipset 1.80v
dram 3.20v

n all the DRAM setting i put at auto onli set the 200/01
can u guide me setting the tci trrd...bla bla bla

This post has been edited by kelvin_hata: Jul 15 2005, 08:34 PM

300
AUTO
16 16
10
100
disable
1.450v
1.300v
above VID * 123%
1.30v
1.70v
2.9V

200
enable
2.5
04
07 or 8
03
07 or 8
16
03
03
02
03
4708
auto
enabled
auto
0
level 7 - play with this (i'm best with 7, some good with 5 or 3)
level 1 - play with this as well (1 & 3 works for me)
8.0
6.0
256
disable
16
07
disable