wahlau arj.. at 2.9vdimm summore. can your TCCD tahan higher vdimm than that?

eh those NF4 ultra D mobos, the ones on the shelf now are they still able to be modded into SLI? they are selling the sli bridge individually now, soz just wondering.

what psu do you guys use with your Ultra-D? mind letting me know how the numbers are when idle and under load/after overclocking? wanna see how the psu performs before i go out and get one. price would be great too. need to work out a budget for the mobo/proc/psu/gfx card (damn pci-e, if not i use back my agp card sigh).

i think i just killed the thread.. lol.. nevermind then, get back to discussing what you were discussing before i commited murder

nice bit of handiwork there! very innovative.. thanks for the idea plagiarism..hehe never thought about trying that before..

have any of u dfi nf4 users found any problems using any particular models of rams? or has it been smooth sailing with anything u stick into the mobo?

thats some luck u got kianwee

was planning to get the ultra-d and pair it up with the OCZ PC4800 EL plat tccd BrainPower pcb rams. reason i am going for TCCD is i am scared of high voltage dinster selling these for RM1090 which is uber tempting. the plat rev2 are at RM790 <-- so kianwee i take it these rams run just fine now 512x2 with the new bios? how far can u oc the rams with this mobo?

heh u guys are having fun frying your rams with this mobo huh? dont even need the ocz booster to do that anymore..

dfi is giving a lot of attention to new bioses for the NF4 mobo.. i've been waiting since january for a non-beta bios for my Pro875B mobo sigh. u lucky sods!!

saw on dfi street, slots 1 and 3 for power hungry ram utt bh5, 2 and 4 for tccd.

btw, lets say my hdd is now in my p4 rig. can i just swap it over to the amd rig without any hitches? or advisable to do a reformat?

now this is just ridiculous.. dfi ultra-d but not proc, gfx card or psu..


Attached thumbnail(s)

getting 3700+ sandy from dinster already

can u guys help me choose either one of these?

OCZ PC4000 Gold VX CH5 chips 250mhz 2-2-2 at 3.3v (Rm890)

or

OCZ PC3200 Gold BH5 chips ~240mhz 2-2-2 at 3.2v (read most reviews hit this particular o/c) (RM680)

hahaha unfortunately i dont have the moolah to get a spare proc at the mo

thanks for the suggestions guys, i made a typo earlier on, the pc4000 isnt rm890, its rm860.. so a bit more appealing now

oh man, i was going to buy the pc4000 gold vx but after reading those threads i'm having second thoughts.. not so much on the coldboot issue but the dead ram issue. seems most rams that died were UTT rams..

hey guys quick question need a simple answer to pair with my nf4 rig:

antec trupower II 480w
or
enermax - dunno which one?

arj is helping me get one from LYP this week.

ray99mond: modular? isnt that the neopower series?
remysix: yeah its to use with dfi ultra-d mobo.. 600w is a bit of an overkill.. i'm just going to run it with an x800xt/x850xt pe.
show-time: dunno whether got stock or not.. hoping to get the antec II if its there.

looking for ocz powerstream 520w.. but dont think can get that here right?

hey guys, arj was at lyp and told me no antec truepower II yet. was going to get him to buy an acbel 600w for me but after i told my brother, he said his friend's acbel 600w recently died whilst priming an overclocked rig..

lol i apologize for steering the thread into a psu one.. if anyone sees the antec truepower II in LYP let us know. pcmoddingmy.com did a review on the psu and it showed pretty solid rails. numbers barely moved from idle to load. was trying to find an online review for the acbel 500w but no luck. though arj tells me its fully sleeved and has lifetime warranty.

hey guys, any of you have the x850xt pe with the biggish stock cooler? does it interfere with installation at all? cause i'm looking at the sapphire x850xt pe in viewnet (rm2000). also, anyone tried changing that big stock cooler to ati silencer 5? got diff?

help needed..

just bought my gfx card and psu (x850xt pe and acbel 500w). tried to run my system for the first time.

i noticed the bios reads 3/10. i put my ocz gold vx pc4000 in slots 1 and 3, but on bootup it says "for single ram stick put in slot 2, for dual channel, use 1 and 3 blah blah blah".. cant boot up any further if using 1 and 3.

tried one stick in slot 2.. ok, can get into windows startup, but then hangs from there and then auto restart and the cycle continues.. can reach windows startup, then auto reboot.

whut should i try? tweak ram settings first?

i was worried about that.. the xp120 makes putting ram into slots 3 and 4 a real pain.

ok same problem.. once windows tries to boot (where there is that moving load bar), it will reboot automatically. i cant even get into windows to flash a new bios.

this is what i've tried.

remove power, remove cmos batt, reset jumper, wait a few minutes, replace jumper, replace batt. gold vx in slots 2 and 4.

turn on pc, go into bios, set optimized defaults. save and exit, enter bios again.. but i left everything on auto (including every ram setting.. do i need to up the vdimm if i leave at default? is this the reason why cant boot?)

same thing. reboot automatically at windows startup. tried upping vdimm to 3.00v, left timings everything at auto defaults. still cannot.