right click the installer and choose administrator?
Asus G73JH Discussion Thread.
Asus G73JH Discussion Thread.
|
|
Aug 13 2010, 12:39 PM
|
|
Elite
14,813 posts Joined: Nov 2006 |
right click the installer and choose administrator?
|
|
|
|
|
|
Aug 13 2010, 12:53 PM
|
![]() ![]()
Junior Member
68 posts Joined: Jan 2008 |
@lee_what2004
It doesn't work. Almost 2 hours searching the net to fix this. All this security is annoying. I miss window xp that just keep quite no matter what u do to it. |
|
|
Aug 13 2010, 02:00 PM
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
3,304 posts Joined: Mar 2006 From: Chicago(Port25) |
I just notice BTO Tech is offering G73JH Refurbished with 3 months US warranty only. However, they allow customization and pricing wise not bad. Still the value batch among all is A2.
|
|
|
Aug 13 2010, 02:22 PM
|
![]() ![]()
Junior Member
112 posts Joined: Jan 2003 From: Hiding Under Some Rock |
QUOTE(Kaizoku @ Aug 13 2010, 10:53 AM) Yeayyy I got My laptop today!! Congratulations mate. I'm using comgateway now for my Intel 6200 card and IC Diamond TIM Laptop G73JH-A1= USD1625.25 DHL Shipping = USD100.27 A BIG smile on my Face = PRICELESS!! Hehehehehe QUOTE(amir_kaldra @ Aug 13 2010, 12:22 PM) @Jeffrey1987 Accessories? Hhahahah. maybe later. Now I'm trying to understand window 7. Huh. Been using window xp cause never like vista. Now I have hard time to install Eset due to not enough privilege. Been reading about take ownership been it doesnt seem to work. QUOTE(amir_kaldra @ Aug 13 2010, 12:53 PM) @lee_what2004 It does work. I'm using Eset "Ahem" version on my G73JH without any problems It doesn't work. Almost 2 hours searching the net to fix this. All this security is annoying. I miss window xp that just keep quite no matter what u do to it. This post has been edited by Viperion: Aug 13 2010, 02:22 PM |
|
|
Aug 13 2010, 02:56 PM
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,518 posts Joined: Mar 2008 From: Here'n'There |
Hope my mom TT the money edi today..then i can receive my baby by next next monday
currently planning to buy these "equipments" for my beast to look more ferocious Razer Megasoma Razer Orochi/Mamba Razer Orca paired with Razer Moray cooler: Zalman NC-2000? really love the Zalman NC-2000..used to use it with my dell xps m1730 *which is burning hot* |
|
|
Aug 13 2010, 03:34 PM
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,661 posts Joined: Apr 2009 |
QUOTE(amir_kaldra @ Aug 13 2010, 12:22 PM) @Jeffrey1987 I can imagine the ? inside your mind now if you swift from XP to 7 . . . just take your time . . . Accessories? Hhahahah. maybe later. Now I'm trying to understand window 7. Huh. Been using window xp cause never like vista. Now I have hard time to install Eset due to not enough privilege. Been reading about take ownership been it doesnt seem to work. Added on August 13, 2010, 3:41 pm QUOTE(Kaizoku @ Aug 13 2010, 10:53 AM) Yeayyy I got My laptop today!! Congratulation . . . perhaps a mini review is coming up? Laptop G73JH-A1= USD1625.25 DHL Shipping = USD100.27 A BIG smile on my Face = PRICELESS!! Hehehehehe This post has been edited by Jeffrey1987: Aug 13 2010, 03:41 PM |
|
|
|
|
|
Aug 13 2010, 05:11 PM
|
![]()
Junior Member
33 posts Joined: May 2010 |
QUOTE(Jeffrey1987 @ Aug 13 2010, 03:34 PM) I can imagine the ? inside your mind now if you swift from XP to 7 . . . just take your time . . . got some pics...will upload later...heheheAdded on August 13, 2010, 3:41 pm Congratulation . . . perhaps a mini review is coming up? |
|
|
Aug 13 2010, 05:14 PM
|
![]() ![]()
Junior Member
112 posts Joined: Jan 2003 From: Hiding Under Some Rock |
@Jeffrey > You updated your bios yet?
|
|
|
Aug 13 2010, 05:16 PM
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,661 posts Joined: Apr 2009 |
QUOTE(Viperion @ Aug 13 2010, 05:14 PM) Nope . . . I'm still in the middle of war . . . Added on August 13, 2010, 5:17 pm QUOTE(Kaizoku @ Aug 13 2010, 05:11 PM) 我在等你哦 。 。 。 This post has been edited by Jeffrey1987: Aug 13 2010, 05:17 PM |
|
|
Aug 13 2010, 05:19 PM
|
![]()
Junior Member
33 posts Joined: May 2010 |
damn....cannot run Farcry2....huhuhu why? why?...hmmmm
It ran for about 1 minute into the game, then blank screen...huhuhuhu |
|
|
Aug 13 2010, 05:25 PM
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,661 posts Joined: Apr 2009 |
QUOTE(Kaizoku @ Aug 13 2010, 05:19 PM) damn....cannot run Farcry2....huhuhu why? why?...hmmmm Dude . . . I'm kinda choke up when I heard some of the users who said that they can't play a particular game as I have never tried any high end games before on my notebook. . . . played only Devil May Cry 4 before . . . It ran for about 1 minute into the game, then blank screen...huhuhuhu This post has been edited by Jeffrey1987: Aug 13 2010, 05:26 PM |
|
|
Aug 13 2010, 05:41 PM
|
![]() ![]()
Junior Member
112 posts Joined: Jan 2003 From: Hiding Under Some Rock |
|
|
|
Aug 13 2010, 05:43 PM
|
![]()
Junior Member
33 posts Joined: May 2010 |
|
|
|
|
|
|
Aug 13 2010, 05:45 PM
|
![]() ![]()
Junior Member
112 posts Joined: Jan 2003 From: Hiding Under Some Rock |
QUOTE(Jeffrey1987 @ Aug 13 2010, 05:25 PM) Dude . . . I'm kinda choke up when I heard some of the users who said that they can't play a particular game as I have never tried any high end games before on my notebook. . . . played only Devil May Cry 4 before . . . So far all high end games runs on my rig without any problems except when I update to the latest catalyst 10.7. I've just installed catalyst 10.7a but I haven't tested it yet. I only had 3 GSOD on 10.7 but that was running stock clocks at 700/1000. If I use AMDGPU tool to overclock to 705/1100 the GSOD will not happen. Please do note 10.7/10.7a increases idle temps by about 5~10 degrees. I used to idle at 55~60c now I'm idling at 60~66c Added on August 13, 2010, 5:50 pm QUOTE(Kaizoku @ Aug 13 2010, 05:43 PM) No don't change vbios as it's not worth the hassle. Also it's official now at NBR and confirmed by an Asus rep that updating a non-Asus vbios voids your warranty. Also there is a risk you could brick your laptop. It's not a big deal flashing the vbios but if you are not sure how to do it you might end up with a 10K doorstop I've given you another solution, use AMD GPU Clock Tool and set you clocks to 705/1100 and you should be able to run all games. Only problem is you need to set the clock speeds manually everytime you restart your laptop. If you are confident and want to have it automatically done then update to the vbios in NBR. I will advice to use ziddy's vbios or smilegerard. Other vbios out there will disable HDMI & VGA This post has been edited by Viperion: Aug 13 2010, 05:50 PM |
|
|
Aug 13 2010, 05:50 PM
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,661 posts Joined: Apr 2009 |
QUOTE(Viperion @ Aug 13 2010, 05:45 PM) So far all high end games runs on my rig without any problems except when I update to the latest catalyst 10.7. I've just installed catalyst 10.7a but I haven't tested it yet. I only had 3 GSOD on 10.7 but that was running stock clocks at 700/1000. If I use AMDGPU tool to overclock to 705/1100 the GSOD will not happen. Please do note 10.7/10.7a increases idle temps by about 5~10 degrees. I used to idle at 55~60c now I'm idling at 60~66c I'm really a noob on this BIOS or VBIOS thing . . . have to google it up after my exam and learn something from it . . . |
|
|
Aug 13 2010, 05:55 PM
|
![]() ![]()
Junior Member
112 posts Joined: Jan 2003 From: Hiding Under Some Rock |
QUOTE(Jeffrey1987 @ Aug 13 2010, 05:50 PM) I'm really a noob on this BIOS or VBIOS thing . . . have to google it up after my exam and learn something from it . . . I'm an experienced IT technician and have 14 years under my belt and I've got to warn you to be extremely cautious. It might not be a big deal for those who updated without issues but I have seen cases when people follow instruction exactly they still manage to brick whatever they were updating. My advice is to do a little research, find the most trustworthy source for a successful update and follow the instruction posted exactly. Oh and of course don't forget to pray with all your might |
|
|
Aug 13 2010, 06:00 PM
|
![]()
Junior Member
33 posts Joined: May 2010 |
QUOTE(Viperion @ Aug 13 2010, 05:55 PM) I'm an experienced IT technician and have 14 years under my belt and I've got to warn you to be extremely cautious. It might not be a big deal for those who updated without issues but I have seen cases when people follow instruction exactly they still manage to brick whatever they were updating. My advice is to do a little research, find the most trustworthy source for a successful update and follow the instruction posted exactly. Oh and of course don't forget to pray with all your might so speaking about Vbios update, which one did you used? how(step by step)?care to share? |
|
|
Aug 13 2010, 06:08 PM
|
![]() ![]()
Junior Member
112 posts Joined: Jan 2003 From: Hiding Under Some Rock |
QUOTE(Kaizoku @ Aug 13 2010, 06:00 PM) I'm still on the stock vbios mate. If you want a modded vbios the best bet is to check the link below and follow the instructions EXACTLY!Ziddy's Vbios v3 Added on August 13, 2010, 6:30 pm QUOTE(evern @ Aug 12 2010, 03:13 PM) Nice thanks alot Nero, can you briefly explain what you did in the vBios? @evern > Just noticed your question here Added on August 12, 2010, 4:19 pm@Nerodante80: bro, may i know is your powerplay working? and what did you actually tweaked to fix the GSOD? is it just enabling powerplay? btw, i'm checking Ziddy's V3 vBios http://forum.notebookreview.com/asus-gamin...-powerplay.html and his voltage is lower 1.05v for default clock and 0.9v for 200/500, i'm running his vbios, maybe that explains why my idle temp is higher than yours but my load temp stays below 80. Added on August 12, 2010, 5:12 pmQuote from Ziddy "First when you flash with ATi WinFlash and you get a fail notice. DO NOT RESTART YOUR COMPUTER. First flash it again with WinFlash with the default bios, until you get success. Then restart and either use DOS method or reflash with WinFlash." does it mean that if i flashed the wrong vBIOS i have a chance to undo it by flashing back my stock vBIOS? If you get a failed message whenever flashing from windows, DO NOT REBOOT your unit or you WILL BRICK IT! If you get a failed message, keep using the Winflash program and try flashing back the original stock bios until you get a flashed successful result. It's always advisable to flash in DOS mode than windows because the windows environment is not stable and sometimes causes errors during flashing. Sorry for the late reply This post has been edited by Viperion: Aug 13 2010, 06:30 PM |
|
|
Aug 13 2010, 06:45 PM
|
![]()
Junior Member
33 posts Joined: May 2010 |
QUOTE(Viperion @ Aug 13 2010, 05:45 PM) I've given you another solution, use AMD GPU Clock Tool and set you clocks to 705/1100 and you should be able to run all games. Only problem is you need to set the clock speeds manually everytime you restart your laptop. If you are confident and want to have it automatically done then update to the vbios in NBR. I will advice to use ziddy's vbios or smilegerard. Other vbios out there will disable HDMI & VGA Downloaded the AMD GPU tool..and used it.... sucessfully run Farcry 2....yeay...hehehe |
|
|
Aug 13 2010, 07:57 PM
|
![]() ![]()
Junior Member
112 posts Joined: Jan 2003 From: Hiding Under Some Rock |
QUOTE(Kaizoku @ Aug 13 2010, 06:45 PM) Good to hear |
|
Topic ClosedOptions
|
| Change to: | 0.0287sec
0.42
6 queries
GZIP Disabled
Time is now: 14th December 2025 - 06:39 PM |