owh, forgot to mention,
vcore-1.5v
ht link-1.5v
nb-1.5v
for 3.8@9Ghv

---

Added on January 5, 2010, 12:33 pmok..
but how about voltage?
at what value that i must not exceed?
i mean for vcore/ht link/nb etc.

This post has been edited by Dura-Ace: Jan 5 2010, 12:33 PM

ya vcore, vnb & vhtt is really high bro, u don't need such high especially for vhtt & vnb, < 1.4v or ~1.3v is more than enuf. u just gotta increase alot of vcore + vimc (cpu-nb voltage) if u oc cpu clock + nb freq alot.

for a 3.8GHz clock, u should be able to tame d chip @ ~ 1.40-1.45v only. load temp too is slightly on d high side.

im lack of information
ok, i will do as bro say..
i already refer to OCZ website, most of DDR3 that exceed 1333mhz have problem with most of mobo..
need to read more on mobo manual...

u dont need to read mobo manual as they won't teach u how to oc, go HERE @ XS to read how 790fxt users tweak their chip usin d same mobo as yas.

some ocz modules have voltage issues only, no biggie. all u need to do is crank up d vdimm, 1.70~1.80v still consider safe for me even w/o active coolin.

all d best, i really miss d board...

thanks a lot bro
i will report to u later on if have succeed onot

---

Added on January 5, 2010, 2:23 pmjust cek from OCZ website, my mobo only compatible with 1066/1333Mhz
so, who wan my RAM?

This post has been edited by Dura-Ace: Jan 5 2010, 02:23 PM

Tread with me suka sama suka! ha ha ha!

Kidding dude! BTW before you sell it to other forumer,why dont you tweak it a lil bit and join super pi challenge! to high bro! need active cooling for that! do refer to XS! It might help you on this issue~

This post has been edited by verdict: Jan 5 2010, 02:36 PM

np, i'm just tellin u based on my short experience w/ d board, mileage varies from rig to rig, some more we are usin diff piece of hardware. i have high hope for 965BE, even it's a c2 i'll still expect it to do 4.0GHz benchable w/ no sweat...

ya ram is capable of 7xx @ cas7 rite? why sell? it's just nice (thou can be better if can do 8xx @ cas 7) for amd platform, it's not so worth it to fork out another RM300~400 (or even higher) just for a pair of ram which has slightly higher overclockability. don't expect 9xx on amd platform, it aint an easy task & u need super high end module like dominator GT (not normal dominator) which can do 8xx/9xx cas 6 benchable. they'll cost u a bomb...

This post has been edited by ah_khoo: Jan 5 2010, 02:38 PM

don wan la sis, sis nyer result power sngt...
nearly gibup with pi con

thanks all..kekekke..now im an adult edi..(sapa pecaya saya baharu masuk 21st)

and to bro cloudwan..u not changing the mobo right? same as me...static at 79c..donno the prob is.. flash bios also same thing..and i kindda hate the placement of connector.. audio and USB front and 4+4 power connector..messing up my cable..

dura? ram!!! naise..what chip inside? saya mcm ingin

Nope, still using the same mobo as ur new mobo la bro kunta.. No moneyh left to change mobo..
Last time ask ah_khoo to simpan his Gigitbyte 790FX mobo dia x mau
Yup that tempin2 is really
I hated the placement of some of the connector to like the Front Audio & USB..
The 8pin CPU power cable still ok for me, i can just route under my GPU etc..

ape buleh buat bro, my sales are always fire sales, everything need to go fast as i need $$$ fast mah...

imagine puttin ya c3 on 790fxt.... powah...


nuf w/ joking, actually ya board can clock pretty well ma... just d matter of time only before u show us better results... take ya time, we're not pressurin u... (in fact i'm)

Kewl mobo i think bro!

on my way!!
but 3.9 already gip me
but still skit hati ngn owner C3(lbh kpd jles kot )

joke only bro..
don wan lego my ram yet coz 8xx @ cas 7 oso can

Actually the mobo(mine & others) dislike high HTT.
I couldnt push anymore further than 300 HTT no matter what = =.
Dura lu pergi change C3 la rather get HD 5770

which bios ur usin now? from those that i've tried, most dislike drr1600 divider. ddr1333 is d way to go if u want high freq + tight timing.

i thought some users managed to do 3xx htt oc on this particular board?

lazy open thread tuk jual la bro...
wan mine?
but canot than from 5000 poison

---

Added on January 5, 2010, 4:27 pmF8C...
1600 but no run any stress lor

This post has been edited by Dura-Ace: Jan 5 2010, 04:27 PM

Dura bro! its a HINT!

This post has been edited by verdict: Jan 5 2010, 04:35 PM

LOL i know lah retiree's are all always like this, like to poison only

BTW here's the 3dmark06 & Vantage benchies u requested earlier for HD5770, all on stock speed tho:

Wahhh syiookk wor! BTW bro oltromen what is the default temp for your 5770!

TO TS what is your 4870 temp,cause mine was a bit crazy? can reach 50 when idle!

This post has been edited by verdict: Jan 5 2010, 04:43 PM

Aiseymen i forgot to put in the GPU temp tab also ah
IIANM at 32% fan speed the temp is around 50c, it could go lower if i set the fan higher but i haven't tried it yet, i just set it at auto control

50c idle on HD4870 is norm, my old HD4870 also like that but i need the fan to be spinning at 45% to make it that temp tho