Now you dont have excuse for not OC your proc! He He He!

have u tried revertin back to stock/lower oc? usually this happen due to instability caused by oc. 

i can see ud5p there... satisfied w/ d mobo? 
ot:
btw, i've just tested win7 64-bit last nite (yes, i'm a slow poke), 1st impression was > it is really fast... 

X sempat lagi la bro, yesterday came back from KL around 1.30am..
Open up the PC to put on the PWMsinks, CPU & GPU and transfer my files from my old WD Green to the new WD Black already 3.30am..
My eyes had almost fallen off already I almost took a day off today to get enough sleep + play2 oc
Hmm i'll try today la bro, but don't put too much hope la bro..

what matter most is d chippies lye beneath d heatspreader. feck those module come w/ fancy naming/bling2 thingy, if they can't run @ d speed & timing i wanted they're nothing to me. i will choose naked crucial value ram w/ d9 chippies instead of khx w/ alibaba (unknown) chipset anytime. * for example only, not to bash khx   

try to lower down your NB and HT speed to 1800Mhz! and slowly increase it up!

Not to forget the voltage as well! ;)Aiiyaarkkk!

315 nyum nyum!

ya vcore, vnb & vhtt is really high bro, u don't need such high especially for vhtt & vnb, < 1.4v or ~1.3v is more than enuf. u just gotta increase alot of vcore + vimc (cpu-nb voltage) if u oc cpu clock + nb freq alot. 

for a 3.8GHz clock, u should be able to tame d chip @ ~ 1.40-1.45v only. load temp too is slightly on d high side. 

np, i'm just tellin u based on my short experience w/ d board, mileage varies from rig to rig, some more we are usin diff piece of hardware. i have high hope for 965BE, even it's a c2 i'll still expect it to do 4.0GHz benchable w/ no sweat... 

ya ram is capable of 7xx @ cas7 rite? why sell? it's just nice (thou can be better if can do 8xx @ cas 7) for amd platform, it's not so worth it to fork out another RM300~400 (or even higher) just for a pair of ram which has slightly higher overclockability. don't expect 9xx on amd platform, it aint an easy task & u need super high end module like dominator GT (not normal dominator) which can do 8xx/9xx cas 6 benchable. they'll cost u a bomb... 

which bios ur usin now? from those that i've tried, most dislike drr1600 divider. ddr1333 is d way to go if u want high freq + tight timing.   
i thought some users managed to do 3xx htt oc on this particular board?