ur referrin to ddr3 stock volt or what bro?

woot, i smell atleast a 5770, or mebe 5850/5870 bro...

i oso wan sell la ahha.
dx11 far too poisoning.

yes by default.. or depends on ram?

i'd say board + ram. my geil ultra default vdimm is 1.5v iirc but lowest vdimm available on a lowly 790gx a3+ is 1.6v.

oh so cannot set 1.5v..
those 1333 ddr3 kvr using which voltage?
i saw some 1.8v.. that's too much for default ddr3..

This post has been edited by 8tvt: Oct 26 2009, 11:04 AM

i've tried 2 pairs, one on elpida & another on qimonda, still 1.6v by default leh (on 790gx a3+).

1.8v too much for ddr3, i dun think so especially if one was to put cl6 on their ram. i'd say acceptable w/ active coolin for day-to-day basis...

This post has been edited by ah_khoo: Oct 26 2009, 11:28 AM

too much for default not on oc.. as IIRC the ddr3 ram got different voltage those earlier batch not @ 1.5v on default..

1.8v for HP consider ok..

those high voltage ddr3 meant for lga775.. so i want to know whether amd got any issue regarding that..

need the jedec spec or use the earlier batch ddr3.. or anything also possible considering the IMC can be manipulated..

just to make sure we not buying the incorrect ram..

you mentioned about 1.6v is the lowest value.. so i wonder is 1.5v possible?
depends on mobo or the IMC itself?

worry not, kingston wouldn't wanna see high rma rate. correct me if i'm wrong, amd is not d not who set d spd table rite? why amd would have issue if d spd table was set correctly?

no, we can't set d volt any lower if 1.6v is d lowest in bios, even alterin d bios won't change anything coz it's limited by hw.

This post has been edited by ah_khoo: Oct 26 2009, 12:19 PM

bro 8tvt, yes can use the 1.5v but like bro ahkoo said ah depends on mobo also.. My gigitbite straight away use the 1.5v setting if the ram is rated 1.5v..
I only use 1.6v to get my KVR running with a better timing of 24-7-7-7

Yeaahhh! LIKE!

ha ha ha! Kidding sis!

then u should try 2.1vdimm sire...
just ignore elpida dont rike low volt...fry the lifetime warranty ram...

long time no see sis..where u go? workaholic life take ur breath away ha?

just want to set the lower possible..

so it's not limited to the platform then..
just that lga775 with ddr3 is not right.. even stupid if using normal ddr3 1.8v on the latest 1156/1366..

in lyp some sell them cheap.. beware though if to buy them..
just thinking if low voltage can oc more..

IIANM i5 & i7 cannot use vdimm more than 1.65v.. More than that the cpu burn liao..

got meh bro? but i've seen more voltage pumped nito their imc but still able to survie, especially i7.

else we won't be seein tight timing @ high frequency...

say bout the ram...i had try KVR on my A3+ wif latest official bios votlage on 1.5 v....last time whn i use old bios...oni can do in 1.6v...

the board are not in my hand...hehe..

nowdays no time to tweak my DFI...ish

Originally is cannot more than 1.65v.
But in XtremeSystems forum, people claimed that as long as the vDimm minus vTT not more than 0.5v should be fine.

-pWs-

guys... i need help...
it's my AMD rig...
It all started when i get back from a 2 weeks hols...
then tried to boot, it cant detect HDD...
then replug my hdd, it's ok d...
after tat reboot, it stuck at starting windows screen(win 7)...
then reformat to newer win7 build version...
all done and when it restart...
oso stuck there....
then after a few tries, it wont boot any more, not even bios...
unplug all hdd n cdrom oso cant boot into BIOS...

if like that 1.8 vdimm require >1.3 vtt then..
got option more than that eh?

not to scare u bro, but i sense a dyin board...

sure ar the hdd ok? otherwise like ah_khoo said..