what eheim pummp version bro! mind to upload it for me!

This post has been edited by verdict: Nov 18 2009, 10:44 PM

http://www.google.com.my/search?hl=en&safe...&tab=iw&start=0

http://forums.bit-tech.net/showthread.php?p=776238

---

Added on November 18, 2009, 11:51 pm1200l/ph!!!

Eheim 1250



This post has been edited by antonio: Nov 18 2009, 11:51 PM

wanna sell?
wahahha

U guys talking bout pump mau try buat crazy oc mcm ini ka?


Running vantage on an OC X4 965 at 6ghz + 5970 OC also

Saucey

Wuuuu! yummy yummy!

wanna let go one of those pump bro antonio!

i might going for MCP 655 next week! Woaaahh!!! that one is crazy setup!




This post has been edited by verdict: Nov 19 2009, 12:56 AM

No larr...MCP655 better...small yet powerful...btw, I also dunno where did I put...last i remembered I put in the boxes which is use to move out to my new house...and thats like 3 years ago...

no super high clock but latest finding is d board does pretty ok for htt oc...



This post has been edited by ah_khoo: Nov 19 2009, 10:02 AM

oooooo nice work bro, i rike
BTW ur still using the old KVR or whut? U got it running at 1600mhz at that timing meh?

hello every tailo here..im new to OC..ytd nite i tried OC my amd Athlon x2 5200 F3 to 3.0 ghz (232 x 13) HTT multiplier 4x (928 mhz) Ram Team Xtreem 4-4-4-10 2x1gb (430.9 mhz) using MSI K9N SLI Platinum mobo.

hmm..i run stress test during my sleep time. this morning i found out that my screen hang after stress test near 2 hours using Orthos. Maybe might be due to my AV auto scanning under background cause it hang?

and again this morning i run stress again for 1 hours pass till 896k test before i rush to work. Anythings wrong with my OC setting ka? I set CPU Vcore at 1.3v and ram voltage is 1.9v.

how about ram timing?

Yup it could be a lil too tight ram timings causing the pc to hang...
BTW whut's the default vcore for the 5200+ F3 eh? Been a long time haven't touch one i forget already

1.3-1.35v..

---

Added on November 19, 2009, 10:42 amF3 some kind lower..

Let us examine the differences between 65 nm version athlon 64 X2 5200+. Basic differences are obvious: this is the TDP level . It is equal to 65 W in one case (ADO5200IAA5DD) and to 76 W in other (ADI5200IAA5DD). Accordingly, we note the voltage ranges : 1.3-1.35 v and 1.325-1.375 v. . Let us note that both processors in this case are based on the same stepping G1.

The supply voltage in 65 nm versions athlon 64 X2 5200+ (2.7 GHz) in average is higher than 90 nm versions athlon 64 X2 5200+ (2.6 GHz): in the last case it is equal 1.2-1.25 v for the stepping F3 and 1.3-1.35 v for F2 stepping . Even the close in frequencies 65 nm processors athlon 64 X2 5000+ (2.6 GHz) and Athlon 64 X2 4800+ (2.5 GHz) have lower power voltages : 1.2-1.35 v.

http://xtreview.com/addcomment-id-2749-vie...nm-version.html

This post has been edited by 8tvt: Nov 19 2009, 10:42 AM

Gaythering eh...
When?

You silent buy one.Lucky bro db tell
Actually not confirm yet.Dono who teh organiser.

@ AMDAthlon

place..??

Want try new things.
Next weekend gonna get all the rest of my hardware. Hopefully everything will be fine.

those are geil ultra bro, if i can get kvr to run @ such timing, i can be dewa ram ledi...

d kvr was sold together w/ d 0922apmw last month.

surprisingly there's not much hiccup in gettin 300htt stable, could be d imc/ram prefer ddr1066 divider. will try out more or lower down d volt needed.

896k could be ram/imc issue. since we can't control vimc in k8, i suspect either vdimm or ram timing can do d trick. i dun have gud experiences w/ team since d gud old day of ddr1...

more details on ram timing & other voltages will definitely help...

This post has been edited by ah_khoo: Nov 19 2009, 12:15 PM

well..this morning de stress i stop the test after passed 896k as i got no time to stress again as i need to rush to work. i believed after 896k test will be 796k test something like that.

so most properly its related to my ram issue? or i should change back my cpu Vcore back to default 1.2v~1.25v?

This post has been edited by KIntos: Nov 19 2009, 12:35 PM

it should be 768k after 896k test... as stated by sir antonio, smaller k (8,10,12) are cpu related while larger k (448 & above) are memory/imc bound.

i'm not askin for cpu details, what i meant was details of voltages like vdimm. vnb, vcore, vhtt & d ram timing. u can use memset or cpu-tweaker to show main & sub timing of ya ram. voltage wise use either d mobo manufacturer software or hw monitor by cpuid.

This post has been edited by ah_khoo: Nov 19 2009, 01:18 PM

Wahhh!! terbaik dari ladang bro ah_khoo!

1600Mhz with CL 7 wuuu!!! using KVR right?

nicely done!