lol... thanks for d offer bro, mebe i can borong ya ram + x2 5000+ be (that if still available), u can fund for c3 while i can get gud price... win win situation... 

if needed d tj-90 mite go as well... since goin to downgrade those important organs like board + cpu + ram mite as well back to basic at one shot... 

yesh... KHX arrive after RMA.. they change with CL4 kit

sempron 300 x mau, kalu sempron 140 nak lah... thx for d offer bro... will let u know if i need it...
meh... 3.75GHz is nothing lah... me was havin a hardtime hittin 3.(GHz prime stable too back then... 
yup, was thinkin bout that too... but let see how things go w/ d sales... 
la... ade wc @ cpu pun bising... me usin cheapo cm hyper 212+ only sis... 
new findin... lower divider give better mileage in cas6 oc... 

[attachmentid=1297684]

New : X4 620
Used: 550BE (that unlocks, but price very high, some even higher than a used X3 that can't unlock lar  )

MSI NB stock cooler x cun lar! haishh!!!

AMD 2011 ROADMAP


This is a single Bulldozer core, but notice that it has two independent integer clusters, each with its own L1 data cache. The single FP cluster shares the L1 cache of the two integer clusters.

Within each integer “core” are four pipelines, presumably half for ALUs and half for memory ops. That’s a narrower width than a single Phenom II core, but there are two integer clusters on a single Bulldozer core.

Bulldozer will also support AVX, hinted at by the two 128-bit FMAC units behind the FP scheduler. AMD is keeping the three level cache hierarchy of the current Phenom II architecture.

A single Bulldozer core will appear to the OS as two cores, just like a Hyper Threaded Core i7. The difference is that AMD is duplicating more hardware in enabling per-core multithreading. The integer resources are all doubled, including the schedulers and d-caches. It’s only the FP resources that are shared between the threads. The benefit is you get much better multithreaded integer performance, the downside is a larger core.

Doubling the integer resources but not the FP resources works even better when you look at AMD’s whole motivation behind Fusion. Much heavy FP work is expected to be moved to the GPU anyway, there’s little sense in duplicating FP hardware on the Bulldozer core when it will eventually have a fully capable GPU sitting on the same piece of silicon. While the first incarnation of Bulldozer, the Zambezi CPU, won't have an on-die GPU, presumably future APUs will use the new core. In those designs the Bulldozer cores and the GPU will most likely even share the L3 cache. It’s really a very elegant design and the basis for what AMD, Intel and NVIDIA have been talking about for years now. The CPU will do what it does best while the GPU does what it is good at.

what if slightly higher than 3.8GHz sis... 

voltage not so nice thou... 

[attachmentid=1301330]

d parts that will go off soon... 

[attachmentid=1301475]

just got my proc yesterday

uhm, I saw the ACC option, I just need to select it, and choose auto right? anything will happen if I failed to unlock it? will it crash?
worry ma

EC firmware
so I need to update the BIOS 1st right?

@verdict.
cannot la sis.
i will only use vcore lower then 1.4v...
3.8ghz x2 takes hell out of me to get 1.4v..
sure x3 is harder and yet impossible for me..

---

Added on November 13, 2009, 11:49 am
when giving guide at HW QA, i always said fireXXX... hahaha...now i get the right term, firmware...kekeke
what is that actually ar bro?

ohhh, so gotta upgrade bios
its risky isnt it, I mean as in if the bios upgrade fail, the mobo dies right?
firmware = software upgrade for the hardware I guess?
hahaha

which camp u'll go for sir? green or red? either one, those gila kuasa (highest end) gfx sure need > 750w, best @ 1k as mentioned. i find it wastin money spendin $$$ on gfx, unless one is hard core gamer or 3d bencher. 

okok, nak bertaubat dah ni... xmo kutuk2 dah... 

was just pullin their legs for bashin biobintang only, d rankin i was referin to is our very own lyn deneb oc chart managed by sis verdict... 

bro -pWs- > 1, flash bios wrongly
ah_khoo > 1, board died w/o any reason
cloudwan > 1 1/2, flash bios wrongly then got flashed by lightning and sent to heaven already   

d rest pls update d list... 

no pain no gain, atleast w/ b can gain mah... painful part is rma only what... distro in sgp berry gud, 1st year one-to-one exchange on d spot... 

@ sir antonio,

suicide x kira... 

phew... nasib baik ade simpan ss x2 @ 4.0GHz ngan 1.392v yg dulu2... muahahaha... 

http://forum.lowyat.net/index.php?act=Atta...post&id=1133821
gud, d rest (B users) pls keep up d gud work... 

bro, it's all distro's fault i tell u... 

let's play lego ah_khoo..
i'm somewhat skeptical about it...

count me in...2 B boards died...

is biostar distro accept direct rma? not going tru any seller...

3.780ghz x3 @1.392vcore failed after 40mins priming   

questions :

why does my vcore on am3 keep on going up & down??

Thanks,

update...new bios able to unlock...plus 2000 ht link-able
(or ayam slowpoke...lame sudah tidak pegang ini desktop..xtaw sudah)
[attachmentid=1302978]
now i can play noob..just increase the multi only la..

 
  currently im using stock hsf when i blend it my cpu temp go to 56C den auto shut down de.. how to stable it? by changing vcore?

56C consider very hot? my cpu idle @ 42C is that normal?

thanks for the answer, what if the flunctuation is big?? what caused this?? err.. PSU?