1) Use 100W bulb, but may causing problem such as melting socket due to its hot temperature.
2) use relay to powered the bulb directly from the batteries.
3) use better bulb.

i don't know and lazy to search about this . which one is better, and last longer?

Mine also install hid on my fog lamp.. So at night when i turn on the light, the hid will flash and everybody will turn their heads to see from which car the flashing came from, and it's from Proton WAJA.. 

Just for 'cool' purpose..    for the headlamps, i'm thinking to install angel eyes.. much more 'cooler' 

Joli, Is it because of your mounting??
Nayte, Waja manual underpower? you sure or not??

---

Added on December 6, 2009, 1:47 amGuys, today went to meet the person who wants to swap manual tranny with my auto tranny.. when i test drive, feel very damn light the engine.. press the gas pedal hard and the car move so fast like nobody business.. the owner said he cut the flywheel to make it lighter.. so nayte, why don't u give it a try??   

But then,  one thing i'm not satisfied.. It's hard to change gear from 1 to 2.. I have to press the clutch hard then baru boleh masuk gear 2.. the rest is ok.. for your info, he's using lancer CK gearbox..

Is it normal? Those using manual tranny, pls 

no way, man! we've gotta stick to our original lights! later people start coming in here and bash me "some waja CPS got identity crisis; taroh BMW lights" 

---

Added on December 6, 2009, 2:47 am

"eeeeew!".... that's what i always say whenever i see a waja with 5-series tail lights 

---

Added on December 6, 2009, 2:49 am

do you think any accessories shop like Brothers can drill and taroh a socket just for that? estimated how much it will cost? RM 50?

How is the effect of your Osram Cool Blue Hyper White bulb? Is it much much more brighter than ori bulb? So Waja use h1, but 1 seller told me h4 

Ok guys, about the VS, I had done quite a lot of research & now I decided go for high quality imitation one. I will go for imitation Pivot Megaraizin vs-m with 5 point grounding HKS cable on RM130. Anyone want to follow me or still prefer to get an ori 1? Decision is on your own.

Reason for my decision:
1. Ori product price is high cos of the "Fame" & cost of their "R&D"
2. Imitation product with good finishing won't have much problem cos :
    a)Good quality finishing to avoid short circuit.
    b)All brand of condenser or electronic parts has no big different.

So what I found out, I rather to get an imitation 1 than ori 1. Some more imitation product of this simple voltage stabilizer won't have much different or may better than ori 1 cos the spec of electronic parts is the same by different brand or maybe higher spec due to their low cost production (copycat). You can try google it how simple of VS diagram as easy as DIY (u can DIY too). Hope this will help.

---

Added on December 7, 2009, 5:51 pm

Alright thanks for the info. HID matta tangkap skip the trouble Cos stock bulb really suxs when is rainy day.

That's water from aircon. Could be due to frozen or sensor failure to cut off the aircon. Get it repair immediately or u may face ECU failure.

Bro do you know how much possible need to spend for repair this problem?

And if i want to change my car headlamp bulb which one should go for?

philips brand ok?i still thinking which one to go:
-Philips PHILIPS X-treme POWER +80% light 25m longer beam,<---- this one ok?selling rm170per pair...

I heard somebody wanna bulk brake pads?
I've recently ask around our forumer in garage sales, they are selling RM110 for rerodo and RM160 for RS
all these are for front pads only

hey sam. i guess u can count me in too for the imitation pivot vs. your statement has convinced me i just hope that there will be no QC problems. how about the warranty? is there any for the imitation one?

---

Added on December 7, 2009, 11:17 pm

hey bro. do u mind taking a pic of your lights shining against a wall at night and share with us? i have been thinking very hard about changing to brighter headlamps. 130-140 is the price for a pair right?

did some research about the bendix too, some say it will tend to finish sooner than other performance brake pad, also will eat up your rotors, how true is it?

about the rotor, which one are you planning to change? mine never change since it was bought 6 years ago. If i were to change the rotor/disc, I will change those with lines on it, not holes because rotors with holes causes a lot of noise and dust, and its for racing purpose. any suggestions?

Alright, thanks Andy
Haha.. yup, squareballs come join us Actually, after I done quite some research, I found out that VS is just a simple stuff, so we pay more or less also can get the same result. Except the high end with a lot other parts VS.

Imitation Pivot Megaraizin VS-M + HKS 5 point grounding cable bulk purchase mission.

1. swk_sam (Sam) - 016-263 1437
2. amd_hardcore (???) - H/P?
3. nayte (Nicholas) - 012-377 8166

Updated:
5unit can get it for RM100 , anyone interested? Deadline by Friday COD PJ area.

I try to ask for more reduction if got more member join. When did u come back?  Can just via banking to someone & get for u 1st if u cant make it.

the auto adjust function is call climate control. available only on X edition.
the air-con will adjust itself according to cabin temperature.
from the picture provided, it was a FAKE ferodo! worst than the conventional bosch or mintex.
i've seen most of the brake pad in the market and this one is definitely FAKE!
it doesn't have the mark / groove in the middle! and the finishing is too rough! an imported ferodo will not be dirt cheap!

once you using it for a couple of days, the outside part will be gone bit by bit! not to mention the uneven wear on the disc.
no problem! am on 205/55/r15!
btw, where you bought the tyre from? am planning to get another set for my rear soon.

I just bought my ferodo zero without the center groove @ RM100, and the seller claim its original and will not give any problem. I cannot blame him also, because he trust his supplier as he said that his supplier is a big company. But that has nothing to do with me. I argued with him and he agreed to exchange for me a bendix metal king. I wanna know, if there is imitation bendix as well? I'm gonna inspect throughly before taking the stock from him.

Andy, you want to get the bendix with me? his shop is at jusco kepong there, i'm going there tomorrow.

i ask for RM140, he said ok, but i tell him i will want to check the condition first
new one will cost between RM250-RM300

i doubt he has the cleaning kit, if he does have, then i will get it.
i still need to see the condition la, if really teruk, then i will bulk with you guys, dont worry. just put me in the pending list, and bulk after next week. if you guys can't wait, then go ahead, dont wait me, later i bought it d, then waste you guys time.

Tire burst out or what?

lol china K&N~
good luck to your throttle body~
specially those sensitive throttle body like waja god bless you

---

Added on December 16, 2009, 1:54 am
you can call me on 012-2023765
i will sms the president phone for you

because i'll never drive local car any more
1.power windows 1 year spoil more then 4time
2.gearbox broken and i change from auto to manual cost me Rm3000 (my generation year 2003)
3.change spark plug/spark plug cable also effected the radio and some other electronic part
4.the door handle 1 year spoil few time too(open softly also can break)
5.i buy the car 2001 "WJA9802" RM68K sell on 2003 Rm18k-Rm20k (minimum i lost Rm50k for 2year driving the Local Waja! o0o
6.lousy Engine Block can be cracked easier!!!!!
7.that is much more that i cant explain all,if u wanna better driving just convert to GSR/MIVEC not 4G18/Campro
Good Luck

bad news for you guys....
yes, do not use those air-blower, the salesman told me before, use K&N product to wash it will do...
btw, I exchange my ferodo to bendix today, it does not comes with center groove and i also bought something else...will reveal below...
i got better price from someone...answer will be reveal below...
i've heard good reviews about the hankok v12 also...good yet not as exp as Micheline pp2
mine does show, from day 1 till now, just check hours ago...
mine goes like 9.7 > 13.3 > 9.7 > 13.3 and so on... for around 1 minute then stop d...maybe when you check it a minute later after you start your engine, the led number does not on for the whole time, it only on the second after you start your engine, and a minute after, it will disappear, save battery wor, according to sifu.
yala, pay a bit more to get something original...(why i didnt do that on vs + grounding?)

okay so the bad news is...I'VE BOUGHT THE K&N FILTER ALREADY!!
When i went to the shop to exchange my ferodo, I saw the filter and ask boss how much, he directly gave me RM240.
If you guys still wants, pm me I will tell you guys the seller's shop and details, limited unit left for waja, and about bulk price, he will ask for me if you guys really want it...
he will ask his supplier, cheers guys! 

PS: dont tembak me or scold me please, I just cannot tahan the temptation, the money is there, stock is there, what to do? you tell me la! haha