1. Remove SD card
2. make sure cam is OFF
3. set the cam to record mode(camera/play slider on the up position), make sure the dial is in P(program) mode.
4. press and hold ^ on the dpad and the focus key while turning the cam on
5. the cam will turn on like normal
6. press and hold < and middle button on the dpad and hit the focus button
7. repeat a few times until you get to the info screen below
Camera Info
Ver 1.20 : 0000 : 0108 (obviously firmware level followed by ??)
No: xxx (long number displayed, maybe the main board serial number?)
PWRCNT: 1341 (I guess the number of times camera turned on, seems about right and does increment after each turn on/off)
SHTCNT: 4575 (the true camera total shot count, only reset by some internal service operation like replacing parts)
STBCNT: 111 (the flash count, number of shots with flash)
PSVCNT: 1 (number of times the auto power off has actuated)
This post has been edited by Nightstalker1993: Oct 7 2009, 05:59 PM
Oct 7 2009, 05:55 PM
Quote










0.0574sec
0.29
7 queries
GZIP Disabled