hmm after searching & googling i think turn off Turbo will not do any harm to ur proc ...

hmm still confuse about C1E & EIST....check my cpuz the vCore & multiplier not going down =.=...

it keeps at 1.248v & multiplier x20 all time....my temp all shows below 56c all the time....aiseh...no harm ka..

still confuse...some said off C1E only...some said turn off both....but is it true it will make the proc not stable if turn on both features?..

hmm im asking about lyn users experience...hope can tell a bit....thx ya!

ppl only turn off those feature to get stable overclock. if u dont overclock u should on all this because it will help u safe on ur electric bill

ask the seller or u can check the voltage written at the side of the ram.

megahalems rm200+ i think. if u wan a cheaper solution get cm hyper 212+ abt rm100

---

Added on December 14, 2009, 4:22 pmswt.. y would they invent something tht can harm ur proc

EIST is same like turbo. Its also known as intel speedstep.

c1e is and advance c state. except c1e can also reduce voltage = save electricity

This post has been edited by WhitE LighteR: Dec 14 2009, 04:22 PM

hahaha thx for the answer..im just curious maaa ...yup im on my way to OC it..thx btw...

here some test i did with my i5-750 & UD6 lol...


here

133 x 24 @ 3.17 - Intel Turbo Boost ON




and here

160 x 20 @ 3.2ghz - Intel Turbo Boost OFF



btw where's 1156 users...come on dude...lets start the parteh!!!

This post has been edited by kilowatt: Dec 16 2009, 12:51 AM

stock cooler? push higher dude.. 4ghz. Stop playin around at 3.2ghz

Its like u oni foreplay the gurl instead of f*** kao her

ya bro i know =.=...we must foreplay & get learn 1st ...then we go so so...then hardcore le =.=...aiseh...

all 1 shot...gf run maaa ...im not showing the 3.2 speed meh...just want to share intel turbo boost on & off actully ...

btw show urs bro



This post has been edited by kilowatt: Dec 16 2009, 12:34 PM

i dont hav the print screen here. i go home n upload later tonite

Worait!! ....where's others?....let see some OC & can share some informative thing 2gether

u can see mine at pg12,all still the same except now my ram running @8-8-8-24 tRFC86

oredi seen it b4 nice bro ...wut mobo + ram + cooler u using?..

P55 UD4P + OCZ + megahalems
not so nice mine though,but performance wise more than enough for 24/7 usage.

---

Added on December 16, 2009, 6:57 pm
my 4Ghz attempt
i got my 4Ghz stable on pretty good vcore.
next! tweaking the ram to run as fast as possible

This post has been edited by Rojak44: Dec 16 2009, 06:57 PM

nice rig @ 4ghz result bro ....

btw I tried to run 3.6ghz by Turn Off the turbo disable C1E & EIST.....180 Bclk x 20 = 3.6ghz @ stock volt & cooler....and my pc keep restarting & wont start ....

then i tried to change the Bclk to 172 x 21 @ 3.6ghz on same stock volt & cooler + Turn Off the turbo disable C1E & EIST...my pc now running then run some 32M superPie lol....

here the screenshot..



so i think its oredi reach the bclk limit on my stock voltage ...

seems that its quite hard to make DDR1333 ram stable @DDR1600
i got around 3000MB/s less on memory write and read when running @DDR1200 compare to DDR1600.
any pros here can tell me how significant that 3000Mb/s is?
im having hard time adjusting my ram @DDR1600.

I was trying to Oc my I7 860 to 3.8ghz. btw..my ram using corsair xms3 2gb x2..so, how far this ram can go? I still newbie with the oc things..how to tweak the ram more efficient? In bios, ram frequency dont have 1600, only 1440, 1800 and above..which one should i choose?

my setup will be 180bclk x 21 @3.78ghz

This post has been edited by shinzhizu: Dec 17 2009, 09:40 AM

whats your RAM frequency? DDR1333?

default is 1333 at 1.5v.

then you should not have any problem running it @1440.
try run memtest 1st before running prime95 after you adjust the timing and voltage.
refer Here for overview of ram timing.

This post has been edited by Rojak44: Dec 17 2009, 10:40 AM

i got test prime95..after 20min..nothing error..idle temp is 44-46, max temp is 86 using prolimatech hsf..btw..can it go 1800?

im not pro in RAM overclocking,but i can tell that it depends on your ram chip,cooling or setting whether u can reach 1800 or not.
u can try though by adjusting timing and voltage,my DDR1333 seems to struggle even at DDR1600 which only last around 2 hour on prime95 before getting error but stable on memtest and IBT(10 loop@2047MB ram utilization).
whats your vcore anyway? your temp are very high.

vcore should be 1.278. i think the temp will reduce if use better fans..im using noctua fan at low speed..800-1000rpm only