here is my 4Ghz stable
Ram only run at DDR1200 but i have adjust the timing,should compensate the low frequency though.


kindly post your everest ultimate v5.30.1903 result for comparison

wow nice dude...btw is it real stable @ that vcore...did u run prime...thx bro...nice OC

yup i even run IBT and memtest to make sure.
it was unstable at DDR1600 so i have to lower down the ram frequency and end up with DDR1200.
bios vcore is slightly higher than the vcore display on cpuz.

hohoho then thats nice! ....will upload mine later ...

Hi all the sifu oc-ers in this thread

Im a noob in oc-ing and want to learn. I have a question tho, how much oc-ing can i do with just the stock coolers?

ur spec bro?...u using i5 or i7

not more than 75C while running prime95?

hows your OCing going bro?

Im using i5 with p7p55-m mobo

still didn't manage to get 4ghz..coz prob with my RAM kit maybe ...wanna change it..then let u know later..lol

oOoo nice bro

loosen your timing alot and decrease it bit by bit or run your ram with low frequency with tight timing then bro
idk if this will help how about disabling HT 1st until you find stable setting?

hmm i5-750 got HT ka?...i doubt that bro ....hmm ok ill give it a try by loosen the timing...

guys, the Malaysia Super PI 32M Challenge is now open to P55/X58 OverClockers. hehe...

HYE ALL!!
i noob here..Those pro..pls hlp me out!

Currently using i7 860 2.8Ghz + Megahalem(1xXigmatek Fan) + Msi P55 GD65(bios V1.2)(how to update bios from 1.2 to 1.5?) + 2GBx1 DDR3 1333Mhz Team-Elite

at stock speed(no oc) + stock bios stting(din touched anything from bios),my idle temp is around 33~38C



1st PROB: when tryin OC using Gnie OC bton(push dat bton during my pc is on,then i restart),after dat,my pc keep restarted..even i cant go into bios setup..y?

2nd PROB:after dat bton not working 4 me,i try using manual OC setup tru bios..my idle temp quite high.. 42~47C..is it normal?


These are my seting:
active proc : [ALL]
intel EiST : [DIS]
C1E sport : [DIS]
adj cpu freq : [190]
oc stping :[DIS]
adj CPU ratio :[20]
adj CPU freq :[3800Mhz]
oc gnie bton:[DIS]
base clock bton : [EN]
DRAM timing mode:[AUTO]
memory ratio:[3]
adj RAM freq : [1140Mhz]
QPI ratio:[16]
adj QPI freq:[6066Mhz]
adj PCi-E:[100]
auto disable:[EN]
load line calibration:[DIS]
CPU voltage:[1.350]
CPU VTT:[1.303]
PCH1.8:[auto]
DRAM voltage:[1.651]
spread spectrum:[DIS]
Hyper Treading:[EN]

*those stting not listed here,i leave it to auto*
SORRY for my BAD english..hope u r understand..

This post has been edited by jerrywan: Dec 20 2009, 11:04 AM

ehh.. i thought u use i7 860
my mistake..

@jerrywan

to update d bios in dis board is so easy...u got ur live update installed[it should be included in the cd dat comes wit the mobo]..
after installed just search for the latest bios n donload[using d software]...
then just install like you install any other softwares through desktop....
**well i did the same thing so i expected it should be for you as well...


and for the oc part...i personally think dat temp is good already and very much normal....and the manual would be resulting better wit the newest bios[1.5] wit the vdroop control option...coz bios 1.2 dont have the option..
which need u kinda high vcore to stable...

***all the things i telling is based on my personal exp it may vary for pro/sifu oc'er...

This post has been edited by phat_mcjack: Dec 20 2009, 11:15 AM

@phat_mcjack

oic..but,is there other way to update bios witout using CD??
bcoz crrently my cd not wit me rite now..dem!

how bout dat OC Gnie Bton,any other way to solve it?

3rd PROB:i confused y in CPUz stated there my DRAM frequency 571.6Mhz only?shud it goes to 800+ smthing like dat?huhuhu..

You need to x2 (571.6MHz) to get 1143.2MHz.

-pWs-

@jerrywan

u can use usb 2 flash d bios..but i never tried it..so dont dare 2 tell anything...
but optionally u can donload the live update software frm msi website...
and abt d oc genie thng i also dunno...i never even really used the 1 on my mobo...totally waste for my case..lol...

oic...thnx ya..

---

Added on December 20, 2009, 12:39 pmhahahah..ok2..
i updated my bios edy..in case i wan return to my old bios,how can i do dat?plug off mobo's batery?or any more simple way?

This post has been edited by jerrywan: Dec 20 2009, 12:39 PM

You need to flash back.
Plug off mobo's battery only clear bios.

-pWs-