hi guys. so i got my proc to 4ghz (20x 200bus speed) at 1.296V, idle temp is about 45-47, full load is close to 80. Is this safe?

hi guys.. im new here.. so please be nice.. hahaha.. i jus bought I7 860 + Msi P55-D65.. i just curious here..

1. at my window experience index, my graphic n gaming graphic just 6.0 compare to when im using PII 955 before, i got 7.9 in graphic n gaming graphic..

2. When i play pes2010, the game not as smooth as when i play on PII 955 before..

btw, im using Sapphire 5870.. i need advice from sifu2 here..
is it because my psu is not enough power?? im currently using tx650w..

---

Added on December 13, 2009, 10:05 amhttp://www.overclock.net/ati/600760-i7-920-bottleneck-5870-a.html

i hv read from here.. i think stock I7 860 bottleneck 5870

my i5 750 is coming to me two days later and pairing with gigabyte 5870, p55-ud3l, corsair ddr3 1600

do u guys think my proc will bottleneck the performance? im so noob about overclocking hope u guys can teach me and share some experience. i dont hav a proc cooler yet maybe i'll just oc a little bit first before i buy the cooler.

thank you

If the 2 16x pci-e slots are 8x/8x with 2 cards then yes it will hurt your performance with 2 5870's

ppl only turn off those feature to get stable overclock. if u dont overclock u should on all this because it will help u safe on ur electric bill
ask the seller or u can check the voltage written at the side of the ram.

megahalems rm200+ i think. if u wan a cheaper solution get cm hyper 212+ abt rm100

---

Added on December 14, 2009, 4:22 pm
swt.. y would they invent something tht can harm ur proc

EIST is same like turbo. Its also known as intel speedstep.

c1e is and advance c state. except c1e can also reduce voltage = save electricity

stock cooler? push higher dude.. 4ghz. Stop playin around at 3.2ghz

Its like u oni foreplay the gurl instead of f*** kao her

u can see mine at pg12,all still the same except now my ram running @8-8-8-24 tRFC86

here is my 4Ghz stable 
Ram only run at DDR1200 but i have adjust the timing,should compensate the low frequency though.


kindly post your everest ultimate v5.30.1903 result for comparison 

yup    i even run IBT and memtest to make sure.
it was unstable at DDR1600 so i have to lower down the ram frequency and end up with DDR1200.
bios vcore is slightly higher than the vcore display on cpuz.

not more than 75C while running prime95?
hows your OCing going bro?

Im using i5 with p7p55-m mobo

same as mine accept da RAM....    
we can be friend lol...  
cant wait for ur result bro....