---

Added on April 22, 2011, 2:26 pmi think the current asus one u meantion can unlock it properly. mine is the older model from that one, see my signature.


this is mine, unlock 550 BE to B50
btw just want to ask, why i saw others unlock but the socket is am2+. is it related with mobo ? 1 more, what is the best of time to stress the cpu ? i mean how long ? 1 hour is enough ? or lower than that ? i stressed about 20minutes and the temp is about 59-60C. is it ok ? or want me to exceed about 1 hour for stress using standard stock ?

This post has been edited by valve: Apr 22 2011, 03:09 PM

im using the msi u listed..the turn down is the memory clocking.. but the good thing is it will support upcoming bulldozer processor..
so my vote goes to that..

---

Added on April 22, 2011, 6:50 pmstress using prime for 1 hour..
20mins and 1hr temp shouldnt differ much if u have a proper ventilation..
custom > time for each FFT = 1

or if u want to cut it shorter,
click on small FFT test > custom > time for each FFT = 1
2nd option around 30mins enough already.

This post has been edited by kuntawakaw: Apr 22 2011, 06:50 PM

orait then. btw, can I use everest system stability test to do the stress ? I stress CPU, FPU, cache & also system memory. currently do not know how to use prime 95. hehe

well.. cant comment on that cuz never tried..and also tat stress tool is not widely used..
for me, prime is still the best..

just blend test..and u good to go.

ok then. i will try for 1 hour n then see what happen next

for blend preset, (no alteration on setting) i think need like 3hrs to determine stability..
for me, i change the time to use for each FFT to 1..and 1hr is sufficient..

(well.. "Stable" is very subjective... some ppl prime for 12hrs.. some ppl only able to do daily task ok already..for me 1hr enough.. so it depends on u )

already try stressing about 1 hour. the temp is about 63C maintain with standard heatsink. no any fans turn on. i mean my "kipas" syiling. . just the casing fans + heatsink do the job. i think my room temp without syiling fan is about 30C.

This post has been edited by valve: Apr 22 2011, 11:19 PM

Hi 2 all)

Mobo : Asus M4A79T Deluxe
Proc : AMD Phenom II X2 555 BE
Unlocked Cores : 2 ->> AMD Phenom II X4 B55




Attached thumbnail(s)

btw just want to ask. why my mobo always need to reset when just only start after completely shutdown ? i mean, it stuck at the bios, n then i have to reset. i think is my mobo, not proc.

stuck at post screen?

yes stuck at the post screen. actually, i just found out that everytime i shutdown, & close the power off at my PSU, it will appear this problem when i want to start up. otherwise, if shutdown but don't turn off at the PSU, it will seems ok. is it related with my PSU ? i think my PSU working just fine. I don't see any problem with others issue.

This post has been edited by valve: Apr 23 2011, 09:30 PM

hmm, i think related to mainboard.
stuck at post screen, hmm, got any words stated overclock fail or similar?

nope, just unlocked the core, n i see my 4 cores are healthy. seems very weird for me. everytime to start pc with pc completely shutdown, i need to reset

it stuck in the post screen when detecting drive or something else?

i had the same problem last time..but different mobo.
it was with dfi fxb.. have to push reset button to turn it on..

i think was solved by updating bios and turning off the CnQ last time.. (too much CPU NB volt also will causes this last time )

for ur case, not so sure,but just update bios 1st and see how

i already update asus official firmware to the latest one but i just take note that when i only TURN OFF the PSU switch off, then I noticed that it will hang when to start the pc at the post screen. otherwise, it works well then. something wrong with my mobo ? this prob occurs when im in older bios & the latest bios official firmware.

This post has been edited by valve: Apr 24 2011, 12:17 AM

if you locked back the core?

the outcome still the same when i lock back to dual core. btw, i just tried with cNq disable. still didnt work for me.

---

Added on April 27, 2011, 8:44 pmi think my prob solve since i unplug all the hardware n put it back, then i try to reconnect the power code correctly. so far it works for me

This post has been edited by valve: Apr 27 2011, 08:44 PM

dah tukar mobo ga 870a-ud3 unlock pegi 4core okay test pakai hyperpi tak hang sebelum ni hang kalau test pakai hyperpi tq

This post has been edited by keyo: Apr 28 2011, 12:08 PM

i wan to oc my AMD Phenom II X3 720BE with Mobo : GIGABYTE MA770T-UD3P | BIOS F2
i try to oc it with the amd overdrive...but the multiplier it dun let me to change it...any1 can tell me y??
i have unlocked the 4th core...