no idea on exterior. but performance wise

stage 1
-------
drop in airfilter, simota/k&n is nice. prepare around rm250 for new one. or cheaper if bought at automotive garage here..

aftermarket extractor. find a tuned-lenght. dont bother with chapalang extractor. it will worsen ur FC. tuned-lenght such as matspeed,powerzone, etc is nice. prepare around rm350 iirc

rear muffler just keep back stock, change the midbox to a better bullet. or retain the midbox and add a bullet will do also. prepare around rm150 or less for a nice bullet

better spark plug cable. those 9.8mm or 10.0mm will do. dont overdo as it will interfere with ur radio/sound system. get a nice brand. NGK is around rm200 iinm.

better spark plug. or better to contact the_catacombs and buy his side-gapped plugs. side-gapped is always good. its better than those overpriced iridium etc etc.. and very cheap also. i think he's selling for less than rm50.

VS or grounding is up to you. i did it for cosmetic purpose.. din felt any improvement.

CAI (cold air intake) remove ur original snorkel with CAI. costs only around 80 including pasang


stage 2
--------
lighten crank pulley rm300 for a nice dampened such as zerone/mythelogy iinm

adjustable campulley rm150 each usually. i dunno viva is sohc or dohc. this thing i also dunno any effect or not if install on stock camshaft. it just moves ur powerband. so u can set if wan play pickup or wan topspeed. i suggest u to play pickup only. topspeed is dangerous la on viva hehe no offence..

skimmed flywheel. dont overdo it, as it will result ur car unable to climb genting hahaha.. skim 500-600gm is enuff i think. most workshop got it own recipe. just told them wan skim flywheel kasi pickup. around rm300

better clutchkit. made in japan exedy or trinity will do. dun take those single plate or springless. unless u think ur leg can handle. haha. plus, no use also with stock engine. hehe..

stage 3
--------
Port and polish cylinder head. contact maddriver for pricing. i dunno the price of this one. i did mine myself with help and supervsion from a pro ofcourse.

oversized piston+bore cylinder block

higher duration camshaft

larger valve + stiffer valve springs + thicker valve retainer (RPW is a good brand)

open pod airfilter + custom heatshield + CAI

oversized exhaust pipe + performance mufflers

individual coils for each plug ?

engine management system (emanage,haltech,microtech,etc) or maybe rechip ECU to remap ur fuel etc etc.. or SAFC maybe?



actually i dunno the staging of each parts. i just wrote based on what i know and what i did to my car (some).. cheers.






oh about handling, the more bars the better lol. but prioritize on

1. front antiroll
2. rear antiroll
3. fender
4. front strut
5. rear strut
6. room bar

and better shocks. TEIN CUSCO HKS is too dang expensive. lookout for hwl or zerone adjustables...

bigger brake servo maybe.. better brake pad (EBC if u got the $$$ but dunno got for viva or not hehe )

lightweight rims? stick to stock size is better. dun add additional load on ur engine..

better tires. toyo R1r, advan neova AD08, potenza RE01R, etc..




just my 2 cents. good luck modding~

respray is the one that will cost u the most.. i saw ppl selling back bumper for around 100-150++

paint would cost a price of another bumper

DUDE!!! You have no idea how much I appreciate you going into such detail in helping me out! I can't thank you enough man! I've never seen anyone going into such detail to help someone out. And I guess I'll just go with Stage 1 and a few of the bars, don't really want to overdo it I guess, and plus its an auto. But seriously bro, thank you! I would kiss you but that would make me gay, so yeah, when I'm done modding I'll out a decal of your username on my car as well!! THANK YOU AGAIN!

haha. its ok bro. just helping out

oh auto ey? remember to install ATF cooler. works brand should be priced around rm300.

or u can search for used ATF cooler at halfcut. mostly evo's oil cooler. which priced 2 rm200-rm250

installation should be around rm50 or much less

anddd.. you're set to vroom~

r u sure got tat cable for viva? ?
btw ARB from UR bars is useless n no point getting tat~

haha no idea. just giving general tips on mod only.

ARB is useless? it improves ur braking power and reduce bodyroll i think.

arb effect is quite significant i think. unless u talking about strut bar?

r u sure it'll improve d car's braking power? ?
i believe proper arb to b install for d car will reduce bodyroll but i neva heard tat it'll improve braking power s it got no logic at all~
normally ppl change better brake pad to improve better braking power~

hi every1 ^^
im newbie....1.0cc auto standard (white)
around RM50 for 420km
being hit by other cars twice.... =(
stil luving my car though...hehe =p
Viva is cheap n nice~!!!!
support VIVA~!!!

wah got so far? me rm50 only can get 380 or so until start blinking

mine i do highway and avoid jam ... workplace is from ampang to centrepoint ...

i can do 420 - 460 on a full tank of RM55 ... or so ...

auto 1.0 also ...

This post has been edited by earl-ku: Dec 31 2009, 01:09 PM

Earl,RM55 using Ron95 petrol ??

yea

happy new yr guys~

nice
i am thinking give it black as well... now stupid tint is damn hot! damn the law!

Huhu,first service for my sister's viva

RM147 total for oil change,oil filter and add-on aircond air filter for RM33

Btw,anyone here knows the exact colour code for Perodua Viva Ivory White?
Some dumb idiot used a coin and made a small but visible scratch on the side of the Viva's bonnet and I want to touch it up

Been thinking of buying DPI Auto Spray Paint at Ace Hardware but got overwhelmed by the variety of white colour available.

I opened the bonnet and there is a sticker that says Kansai Paint Milky White W09.

Btw,how much is the 20,000 km major service? I was quoted RM380 when I visited the Perodua SC.Heard someone say it cost only bout RM200? They charging RM55 for a new air-filter WTF!!!

This post has been edited by 779364: Jan 2 2010, 01:11 PM

ivory white code W09

ma ride..


metal petrol cap.







muffler tip with turbo wistle...!




under




advan custom make armrest



cmon guys show yours....

is it easy to get elite ezi parts to fit into standard via auto? thinking of buying used viva but i love the looks of the elite ezi

my driver seat has been squeaking for almost 2 weeks now ... was given the runaround by the dealer, and p2 sc ...

finally was told to wait as replacement part is being ordered to fix it, the railing issue ... damn iratating i tell u ...

hw long to wait bro?