Outline ·
[ Standard ] ·
Linear+
AMD® Socket AM2&AM3 Overclocking V18, Hmmm...The heat of AMD..is on the way..
|
mruzian
|
 Jul 5 2009, 10:26 PM
|
|
QUOTE(kuntawakaw @ Jul 5 2009, 10:02 PM) ur trip? to where? selling off ur c2d? u sure XiuKeong? moving to consol ya..huuu  1st shop i tried is thundermatch...and i bought 2 0922 untill... and the 2nd shop i asked is pczone i guess..still 0922.. i guess the 0922 out edi la...back to a not-so-good batch..but still that batch can unlock right. i did touch the nb heatsink.. i cant put my hand there more then 5secs..its hot (no oc no priming).. compared to my mobo..i can put my hand for 1year also no burn yet.. hmm... how cud that be... mebbe the heatsink is too effective in transfering the heat or the nb is too hot.. not the heatsink fault..the nb is hot.hmmm i'm using TT Extreem Spirit 2 as NB replacement its one of the cheapest solution i can find right now  and totally cool down those 'melting NB' try to fit Deepcool N8 but no avail since i'm using CCF with that board |
|
|
|
|
|
cloudwan
|
Jul 5 2009, 10:32 PM
|
|
|
QUOTE(mruzian @ Jul 5 2009, 10:26 PM) i'm using TT Extreem Spirit 2 as NB replacement its one of the cheapest solution i can find right now and totally cool down those 'melting NB' try to fit Deepcool N8 but no avail since i'm using CCF with that board Can u show any pic of it assemble in ur rig? Thinkin of looking for anything to help my NB temp also but seem kinda tightfit to use with my CCF ah |
|
|
|
|
|
kuntawakaw
|
Jul 5 2009, 11:06 PM
|
|
|
QUOTE(mruzian @ Jul 5 2009, 10:26 PM) i'm using TT Extreem Spirit 2 as NB replacement its one of the cheapest solution i can find right now and totally cool down those 'melting NB' try to fit Deepcool N8 but no avail since i'm using CCF with that board my nb8 left unuse leh...since it cant sit properly on the biostar nb..and my mobo nb temp not high so i dont mind using the stock but i afraid if i put the nb cooler on my fren's mobo,then the tragedy looping..like my old mobo..so i think the nb can withstand that heat..i just "ok la" @cloudwan..oic.. that is the main factor la..hmm.. even tho they in the sam 7 series... and tey lunch at the same time right? <---correct me if im wrong still differ in the nm.. |
|
|
|
|
|
xcen
|
Jul 5 2009, 11:11 PM
|
|
|
Tomorrow is time for me to collect meh Vantec ION2+ 450W RAWWWRR!!!! Nooby OC in action soon!  Btw, bought IKEA Dralla today, great mousepad. |
|
|
|
|
|
kuntawakaw
|
Jul 5 2009, 11:15 PM
|
|
|
QUOTE(xcen @ Jul 5 2009, 11:11 PM) Tomorrow is time for me to collect meh Vantec ION2+ 450W RAWWWRR!!!! Nooby OC in action soon! Btw, bought IKEA Dralla today, great mousepad. aiya... ianho recommendation right? i want it to.buy sigh no ikea near myplace...buy me 1 xcen..pls....hehehe drala drala drala.. what setup ur using? oc oc oc..hehehe..what proc? |
|
|
|
|
|
xcen
|
Jul 5 2009, 11:20 PM
|
|
|
QUOTE(kuntawakaw @ Jul 5 2009, 11:15 PM) aiya... ianho recommendation right? i want it to.buy sigh no ikea near myplace...buy me 1 xcen..pls....hehehe drala drala drala.. what setup ur using? oc oc oc..hehehe..what proc? Should've told me earlier ma... I can buy 1 extra for you and postage to you. My setup very lembik wan la, 720BE + Bioistar 128M + CM Hyper TX-2 only. |
|
|
|
|
|
digswell
|
Jul 6 2009, 12:20 AM
|
|
|
@cloudwan Got ur email and i check the deive ID edy... » Click to show Spoiler - click again to hide... « Sata device ID For SB600/700/750 = 0x436e1002 0x43791002 0x437a1002 0x43801002 0x43901002
and SB710 dev ID 1002-4390 mean is 0x43901002
and Pata dev ID = 0x43491002 0x43691002 0x43761002 0x438c1002 0x439c1002
SB710 dev ID 1002-439C mean is 0x439c1002
Sata should be work without any problem but Pata hv to Add another IOatafamily.kext driver This post has been edited by digswell: Jul 6 2009, 12:22 AM |
|
|
|
|
|
TSAMDAthlon
|
Jul 6 2009, 09:11 AM
|
|
|
Xiu keong..New/upcoming processor should be Propus..Which is due around Sept..Next year is quite nice time to upgrade  Anything i need to update?Thread stays 1st.. |
|
|
|
|
|
ah_khoo
|
Jul 6 2009, 10:44 AM
|
- No Action Talk Only -
|
QUOTE(cloudwan @ Jul 4 2009, 11:25 PM) Don't worry ah bro, TJ like FT uses conventional airflow type, it doesn't uses those pelik mobo 90degrees turn  hopefully, assemblin d case half way... it's way easier to install components in bigger case.  a modular psu is no longer a must but will definitely make things perfect...  more & more unlocking bios nowadays...  Source |
|
|
|
|
|
noobianz
|
Jul 6 2009, 10:51 AM
|
|
|
any unlocking bios for MSI DKA790GX platinum? I cant find it on the net =(
This post has been edited by noobianz: Jul 6 2009, 10:51 AM
|
|
|
|
|
|
mruzian
|
Jul 6 2009, 10:59 AM
|
|
|
QUOTE(cloudwan @ Jul 5 2009, 10:32 PM) Can u show any pic of it assemble in ur rig? Thinkin of looking for anything to help my NB temp also but seem kinda tightfit to use with my CCF ah no prob 
QUOTE(kuntawakaw @ Jul 5 2009, 11:06 PM) my nb8 left unuse leh...since it cant sit properly on the biostar nb..and my mobo nb temp not high so i dont mind using the stock but i afraid if i put the nb cooler on my fren's mobo,then the tragedy looping..like my old mobo..so i think the nb can withstand that heat..i just "ok la" @cloudwan..oic.. that is the main factor la..hmm.. even tho they in the sam 7 series... and tey lunch at the same time right? <---correct me if im wrong still differ in the nm.. bro one more thing for that mobo, use sumthing like this too for the mosfet area 
|
|
|
|
|
|
cloudwan
|
Jul 6 2009, 11:04 AM
|
|
|
QUOTE(noobianz @ Jul 6 2009, 10:51 AM) any unlocking bios for MSI DKA790GX platinum? I cant find it on the net =( ah_khoo already posted in this forum a few post back.. Try looking here but no warranty it would work ah: http://www.xtremesystems.org/forums/showthread.php?t=228417
Added on July 6, 2009, 11:08 amQUOTE(mruzian @ Jul 6 2009, 10:59 AM) no prob » Click to show Spoiler - click again to hide... « bro one more thing for that mobo, use sumthing like this too for the mosfet area » Click to show Spoiler - click again to hide... « Miahahaha, i see ur using those cheapo made in china copper ramsinks like me for the PWM too They are ok but last time when i stick it on my Biostar mobo the thermal tape sometime would lose it grip n it will tergolek at the bottom of the case This post has been edited by cloudwan: Jul 6 2009, 11:17 AM |
|
|
|
|
|
ah_khoo
|
Jul 6 2009, 11:09 AM
|
- No Action Talk Only -
|
QUOTE(cloudwan @ Jul 6 2009, 11:04 AM) ah_khoo already posted in this forum a few post back.. Try looking here but no warranty it would work ah: http://www.xtremesystems.org/forums/showthread.php?t=228417but i think d bios is not able to run unlocked core(s) for prime stable, same issue like my 790fxb & some asus boards.  |
|
|
|
|
|
kuntawakaw
|
Jul 6 2009, 11:12 AM
|
|
|
QUOTE(mruzian @ Jul 6 2009, 10:59 AM) no prob bro one more thing for that mobo, use sumthing like this too for the mosfet area a noob just put the ramsink here... since i touch that part quite hot  |
|
|
|
|
|
cloudwan
|
Jul 6 2009, 11:16 AM
|
|
|
QUOTE(ah_khoo @ Jul 6 2009, 11:09 AM) but i think d bios is not able to run unlocked core(s) for prime stable, same issue like my 790fxb & some asus boards. Ya ka?? Aisey still have to wait for the MSI official one eh? QUOTE(kuntawakaw @ Jul 6 2009, 11:12 AM) a noob just put the ramsink here... since i touch that part quite hot » Click to show Spoiler - click again to hide... « U put the ramsinks on the ferrite chokes?? This post has been edited by cloudwan: Jul 6 2009, 11:17 AM |
|
|
|
|
|
mruzian
|
Jul 6 2009, 11:25 AM
|
|
|
QUOTE(cloudwan @ Jul 6 2009, 11:04 AM) ah_khoo already posted in this forum a few post back.. Try looking here but no warranty it would work ah: http://www.xtremesystems.org/forums/showthread.php?t=228417
Added on July 6, 2009, 11:08 amMiahahaha, i see ur using those cheapo made in china copper ramsinks like me for the PWM too They are ok but last time when i stick it on my Biostar mobo the thermal tape sometime would lose it grip n it will tergolek at the bottom of the case yup cheapo solution only...but i put 2 40mm fan to blast on top of it and perform nicely |
|
|
|
|
|
-pWs-
|
Jul 6 2009, 11:27 AM
|
Look at all my stars!!
|
Effective yet cheap.  -pWs- |
|
|
|
|
|
kuntawakaw
|
Jul 6 2009, 11:36 AM
|
|
|
QUOTE(cloudwan @ Jul 6 2009, 11:16 AM) Ya ka?? Aisey still have to wait for the MSI official one eh? U put the ramsinks on the ferrite chokes?? hahaha.. i know the usage of that thing..so digs said "put a ramsink on ur mosfets" and i said "mosfets it the component that deliver the volt to cpu right" and i tot i get it right..haish... that place no need any heat sink? i have extra ramsink..will put on the fets later noob noob noob |
|
|
|
|
|
cloudwan
|
Jul 6 2009, 11:39 AM
|
|
|
QUOTE(mruzian @ Jul 6 2009, 11:25 AM) yup cheapo solution only...but i put 2 40mm fan to blast on top of it and perform nicely QUOTE(-pWs- @ Jul 6 2009, 11:27 AM) Effective yet cheap. -pWs-Yup cheap and quite good that i'm also using it again for my gigitbyte board... |
|
|
|
|
|
ah_khoo
|
Jul 6 2009, 11:40 AM
|
- No Action Talk Only -
|
QUOTE(kuntawakaw @ Jul 6 2009, 11:12 AM) a noob just put the ramsink here... since i touch that part quite hot copper need to be cooled actively. QUOTE(cloudwan @ Jul 6 2009, 11:16 AM) Ya ka?? Aisey still have to wait for the MSI official one eh? U put the ramsinks on the ferrite chokes?? saw some posts mentioned that they get locked ups when run prime blend test, exactly d same issue like mine (x3 720) b4...  just wait for msi to release legal version of core unlockin bios, gigabyte & asus have done it w/ hybrid acc & unleash... dfi is sloooooow as always....  |
|
|
|
|
Quote
0.0307sec
2.12
6 queries
GZIP Disabled