I didn't put any fan there coz got no space with the CCF in place
But i do have the top large 140mm fan blowing cool air down on it which should do the trick.. i think

Dont say think think..Try touch with your hands to feel if it hot..Usually if me ..i will use Alu one so it will dissipate better..

from d peekture those bga ram sinks looked a 'lil short. i'd prefer those w tall fins coz imo they better in heat dissipation. let's not forget copper is gud in absorbin heat but slow in releasin 'em, so in this case, i think passively cooled alu ram sinks w tall fins will do a better job than d short copper bga ram sinks which is also passively cooled.

it'd be perfect if can find to mosfet coolers on old lp nf4 board...



alu = absorb heat slow, ok in dissipate heat even passively cooled.
copper = gud in absorbin heat but need to actively cooled for optimal performance.

iirc actively cooled copper pwns actively cooled alu.

This post has been edited by ah_khoo: Jul 6 2009, 12:03 PM

Miahahaha, i wish it was that easy to find too, been going up and down Lowyat plaza last time but only able to find those short hsf..
Atleast much better than not having anything at all

This post has been edited by cloudwan: Jul 6 2009, 12:01 PM

does this a perfect match?

[attachmentid=1062046]

Looks good, whuts the measurement?
Where did u get the alu block xixo??

This post has been edited by cloudwan: Jul 6 2009, 12:42 PM

L=6.7cm
H=2.5cm
W=1.5cm

long time i search for it.. until one guy offer to me rm10 shipped..
so grab it ler..

the dimension kinda reliable.. fit nicely

Aisey looks kinda short ler for my gigitbyte, can he customize the length??



Plus does he have thermal tape also??

This post has been edited by cloudwan: Jul 6 2009, 12:57 PM

dem.. just realize u change the board.. lol

actually he got the sink that really fit the two hole (same design as ur giga).. maybe need to mod about the length, too bad, his wife already throw away that sink.. lol (thinking to grab it)
[attachmentid=1062090]

then he offer like in the pic b4.. so i just grab it..

that just an old sink.. so no thermal.. figure out ya self to get the thermal la..

This post has been edited by xixo_12: Jul 6 2009, 01:03 PM

u guys punye mosfet n sb panas2 ke?
now im scared if mine will be like dat..

this was how my beloved 790gxe looked like b4 it found a better owner... sad case that d mosfet coolers are no longer available @ bro Gary a.k.a uglyvapmp's shop in sls...



This post has been edited by ah_khoo: Jul 6 2009, 02:32 PM

Wow, nice looking pwmsink's mod there
I pm'ed uglyvamp dulu also about the same pwmsinks, till now no reply..
Considered no more ler tuh..

---

Added on July 6, 2009, 2:31 pmAhsus don't have to worry kot, they got better quality pwm's than biostar..

This post has been edited by cloudwan: Jul 6 2009, 02:31 PM

actually b4 i used that small cheap copper sink, bought this



but cannot fit to my MSI C45
but i still do think that actively cool copper sink will still kick@ss

This post has been edited by mruzian: Jul 6 2009, 02:46 PM

Ooooo where did u get it? What's the measurement??
Thinking of selling it off??

sell to me..i want i want
hehe
mruzian..can u share me the ss of ur oc? 3.7ghz prime stable? what will be the vcore?

Sibok ajer, org dah tanye dulu

mruzian... i offer rm1 more then cloudwan do.
wakakaka..

cloudwan..max oc with x4 how much?hehe..and ur old board. ta790gx 128.u dare to put 1.50vcore? not priming..only superpi ing

Max oc with the X4 prime stable or not? If not prime stable 3.3ghz so far.. Still pening2 belajar Gigabyte award setting..
Plus even when not oc the mobo itself suda main tipu oc skit..

Yup tried a few times on the biostar at 1.5v but never use for long, just minor benchies..

This post has been edited by cloudwan: Jul 6 2009, 03:19 PM

oic...
so far max is 1.424vcore with x4 3.9ghz.. if can put 1.5vcore.. i hope 4.1ghz is superpiable.. afraid it will puffff...and gone.
there is "find max htt" thing in my frens mobo..and also have 2 switch. if i get this mobo 6months ago, sure i use thi feature..



i want a new mobo + new psu + new cooler = daydream...

This post has been edited by kuntawakaw: Jul 6 2009, 03:34 PM

I thought only Prolimatech Megahalems is considered transformers, apprently i was wrong :

Introducing Evercool Transformers 4 (not directed by Michael Bay )



The Review

---

Added on July 6, 2009, 3:35 pmI want DDRIII Tracers

This post has been edited by cloudwan: Jul 6 2009, 03:35 PM