itu Enhanced Intel Speed Step at work guys.like u guys C&Q.
and its 4.5ghz @ 500 fsb x 9.

here's a something something for cloudwan
[attachmentid=969674]

 
U nih.   

-pWs-

reset cmos doesn't help bro?

mcm psu overheating je..sala betulkan saya...saya budak baru blaja

betul la xixo dan ya aku skip test feature 1-6.

main reason aku kat sini adalah sebab tuhan OC yg aku worship tu demand satu AMD user convert ke Intel kalau x dia hantar Thor untuk terrorise aku.

Tuh bwk bro -pWs- tuh, dia tuh dah lama convert kepada tuhan OC muh tuh

Erk??? Its not that I cannot go into bios or cannot load Bios page...Just when it happens, the PC cant be on back again so quickly...

Its like that when I set thermal protection shutdown at 75c, and up to 85c.... now I set to 95c, no sudden shutdown, but yesterday nite got one time happen once... :/stars:  :/shock:
erk??? Why overheating pulak??? :/shock:  :/sweat: side panel is open, the PSU fan is spinning slowly and there isn't a lot of things to power...I'm using Silverstone ST56F btw....

It powers;

-Mobo/CPU/Ram/Onboard Fans x 2
-2x 80mm Sunon (Exhaust Fans)
-1x 120mm Thermaltake (CPU Fans)
-4x Sata HD
-2x IDE CD/DVD Rom
-1x UV Light kit
-1 Blower

Takan itu pun mau overheat  :/sweat:  :/cry:  :/hmm:

dia dah convert.aku perlu fresh blood yg x penah sentuh Intel ni.

dia dah convert.aku perlu fresh blood yg x penah sentuh Intel ni.

intel thread x bfungsi, tu la hilmi lepak kat cni.. kalo x, xleh nk show off, amd community so strong

betul la xixo dan ya aku skip test feature 1-6.

main reason aku kat sini adalah sebab tuhan OC yg aku worship tu demand satu AMD user convert ke Intel kalau x dia hantar Thor untuk terrorise aku.

Tuh bwk bro -pWs- tuh, dia tuh dah lama convert kepada tuhan OC muh tuh

@antonio,
do you run a long period of prime?

erk??? Why overheating pulak???   side panel is open, the PSU fan is spinning slowly and there isn't a lot of things to power...I'm using Silverstone ST56F btw....

It powers;

-Mobo/CPU/Ram/Onboard Fans x 2
-2x 80mm Sunon (Exhaust Fans)
-1x 120mm Thermaltake (CPU Fans)
-4x Sata HD
-2x IDE CD/DVD Rom
-1x UV Light kit
-1 Blower

Takan itu pun mau overheat     

I OCed my phenom II to 3.2 GHz at 1.3125 volts. I start doing full load tests, no crashes. Then I start increasing my HD 4890 volt to 1.4v and OC that as well. I start another full load test, it crashes and I had to wait a few minutes before I can start my pc back (typical psu overheating symptom). I can also crash the system by sending in 1.4 volts to my phenom II at 3.5 GHz btw(despite being stable).

Currently I'm still tweaking 3.3Ghz with 1.55v...

Juz now failed Orthos after 3 hours and 44minutes of running it...

Ur temp reading semua ok? Xde over??

sorry if wrong info..noob here
but
hes psu is faulty...not because overload...

no doubt, i think it's one factor of heat, ur mobo take those time too reduce the temp on the board during long time stress.. actually it's not recommend to prime so long on biostar board, eventhough u cool their pwm nicely..

but nice effort and path you have there, but i'm not prefer that path..
but beware, u will end with RMA if doing like that too often,