secondary slot the black one coz cannot put in yellow bcoz of ccf+fan block aredy...

i js remember u r using 920 so cnt la get m4a78t-deluxe, coz its DDR3 punya..

else:



so u want gathering??

yep... actually FXB is nice thou... its performance really worth the price..

act for normal normal + extreme OC still suggested to FXB.. can save some $$

ohh... itu la kelemahan A$U$ where DFI do better in this

This post has been edited by cdlim87: Apr 29 2009, 03:34 PM

Yeap, I'm waiting for the date.

Oh..so Asus M4A78T E is really gud? even compare to TA790GX3...

but TA790GX3 now really hard to find stock..if got also very expensive..

499 from one of the LYN seller here...

good.. u sponsor food

good, but not la to compete 790FX.. GX still hv a gap with FX..

ta790GX3... erm... for me i would oni consider it if the price below 450Rm..

mayb no stock thats y price up.. or u wan a MSI platinum..

else keep funding ler.. FXB will not kecewa'kan u 1...

edit:
actually still got 1 choice, but i not really recon la.. JW 790GX extreme, it seem got some small tech prob,
u gotto learn it frm forum n solve it by ur own.. and here no ppl can guide with this board coz no ppl use it here..

so to be safe, better get another board that many ppl use..
else u can js go for 128M.. cheap + good too.. only the GC slot inproper placement thou..



This post has been edited by cdlim87: Apr 29 2009, 04:47 PM

Yeah i'm not spamming tooo here's da proof:

3Dmark Vantage with Phenom II X3 720BE at 3.6ghz


Not prime stable though

Guys, do u think a very good PSU is also a factor to get the system prime stable??
I'm starting to feel like my PSU is holding me back plak

What's the difference between the 2 "D" mobo?

Which model meh?? If JR it's M-ATX but if it's DK it's ATX..

here is mine

lapped my ori heatsink juz now.
noticed a 5C temp diff lol. before this 35++, now oni 30.

NBTD ah? Maybe you can start your little business by offering lapping service.

BTW, which lapping guide do you follow?

do u OC ur GC? try dun OC ur card, and push.. suppose the psu is enuf... but u r stay too far, else mayb u can try other mobo see hw far it could go, mayb is temporary "stop" by ur mobo.. ^^

which D??

nono... 940 3.6GHz not allow to enter data

wow... that was nice bro.... 5c is a huge improvement

3.7 fail when run prime95

must pay more patient on it... u own a good board but if u run a 940BE @ 3.6GHz on m4a79-dlx is a waste..

make it 3.7-3.8 is still nice...

BTW post ur screenie where u stuck at.. sure got sifu guide u to the better level...

no way lol. still not pro.
ermm the guide in 1st post at lapping guide.
the 400,600,800,1000,1500,2000 sand paper.
with some metal polish.
not like mirror edi.

can i ask about ram here?
its in amd platform tho..
i still cant get the devider thing..cpu/6...
and y got system that the cpuz shows the fsb:ram? mine shows the divider...

divider cpu/6 means that ur ram is running at ur clock speed divided by 6.
so if 3000 ur ram runs at 500Mhz.

mind to tell me further?
1 thing that im not clear... my ram is 800mhz..but value one..but now im running at 2.5ghz with cpu/6.. so it will be 416mhz.
but i set in bios my ram speed is 667mhz.still not clear.

This post has been edited by kuntawakaw: Apr 29 2009, 09:52 PM

Well,I think My Proc R At The Limit Rite Now Just Tweaking My Ram.

Make it clear.

It's actually CPU FSB:RAM ratio.

So if your proc OC to 300FSB and you set 1:2 ratio.

So your RAM speed will be 600(show in cpu-z) but real effective clock will be 1200MHz.