actually 6000+ is not so easy to get to 3.4GHz stable.. mine oso cnt even hit 3.4GHz stable..
i not sure is wat prob, will try harder when i free..
last time i thk is my ram prob... but will check it out soon..

yep..125w default.. will watch out that..
wait aft exam, when i free to ply.. i will try more... TDP also in my calculation..
as lost time xixo got remind me dun put too high vCORE for it as the TDP thingy..

neway will try harder aft this.. i belive can do 3.4GHz

if 69c need to care more..

bang pacak ram kat primary kah secandary??

is D or straight A$U$ ..

always say A, thn can la bring to gathering n for WR

macam dia panas jeeeee... dia minta "air" sikit, not air, tapi "air"...

then hw ur BARedit? 2.5GHz ledi??

waaaa.. u long time no come then come n menyepam..

edit:

not really trust this board...

bro gv ur total budget.. mayb can help in some calculation for u..

ASUS M4A78T-DLX

This post has been edited by cdlim87: Apr 29 2009, 03:08 PM

i js remember u r using 920 so cnt la get m4a78t-deluxe, coz its DDR3 punya..

else:



so u want gathering??

yep... actually FXB is nice thou... its performance really worth the price..

act for normal normal + extreme OC still suggested to FXB.. can save some $$

ohh... itu la kelemahan A$U$ where DFI do better in this

This post has been edited by cdlim87: Apr 29 2009, 03:34 PM

good.. u sponsor food

good, but not la to compete 790FX.. GX still hv a gap with FX..

ta790GX3... erm... for me i would oni consider it if the price below 450Rm..

mayb no stock thats y price up.. or u wan a MSI platinum..

else keep funding ler.. FXB will not kecewa'kan u 1...

edit:
actually still got 1 choice, but i not really recon la.. JW 790GX extreme, it seem got some small tech prob,
u gotto learn it frm forum n solve it by ur own.. and here no ppl can guide with this board coz no ppl use it here..

so to be safe, better get another board that many ppl use..
else u can js go for 128M.. cheap + good too.. only the GC slot inproper placement thou..



This post has been edited by cdlim87: Apr 29 2009, 04:47 PM

do u OC ur GC? try dun OC ur card, and push.. suppose the psu is enuf... but u r stay too far, else mayb u can try other mobo see hw far it could go, mayb is temporary "stop" by ur mobo.. ^^

which D??

nono... 940 3.6GHz not allow to enter data

wow... that was nice bro.... 5c is a huge improvement

must pay more patient on it... u own a good board but if u run a 940BE @ 3.6GHz on m4a79-dlx is a waste..

make it 3.7-3.8 is still nice...

BTW post ur screenie where u stuck at.. sure got sifu guide u to the better level...

FXB

giga.. i not so sure, but frm wat i see frm the build of the board, i belive its quite promising.. go for their 790FX product..


__________________________________________

bout the ram divider now understand? or still blur2??

800 KVR can run at 950 but mayb will coz it die faster la..

follow ur own taste... if want a good performance to bee sure use higher HTT to boost ur cpu speed n also ram speed lor.. so that ur sys will faster

yep... like asus almost the same wat..

other then FX u better got for FXB

KVR 2GB stick put 1.95-2v still boleh tahan laa... if u stick the ram sink to it, it will sihat lama...
as long as the name KVR = kingston value ram
actually i not really understand ur ques there..

which 1 i prefer? erm...
need to see when n do for wat lor... if on9 or idle usage... i normally run CnQ, suite for nowadays weather.. coz too hot..

if ply dota, i lowering my multi to x10 mean 2.0Ghz with DRAM 400, no lag for dota..

sometime use 2.4/2.8GHz too.. ply graphic game, OC to 3.2GHz, DRAM still is 400, or sometime higher 33xxGHz lor..

always use diff setting 1... ply ply wat..

can, but tapao r not allow, bring ur bike there let me OC 99..

___________________________________________________________________________


BTW guys, asking some opinion:

yup mostly i will make my ram run at 800mhz. oni few time run in OC'ed condition.. neway its depend on ur own taste too..

make it fair, i shoud tell u this board not really allow u OC nicely... 2.8-3.0GHz hopefully no prob

this is a nice ques that u gotto test by ur own n tell every1 here.. coz at diff cont, it hv diff result.. sometimes tight timing with lower speed can do better then higher speed loose timming. but is not 800 vs 1066 laaa, that is too much diff.....

the best 1 still the high speed low timing.. , to get this , pump ur vDIMM to 2.5-2.6v, am i rite master ram? (point to xixo )

lol...
BTW js ask ask laaa.. see which 1 ppl prefer... me still prefer asus M4A79T-DLX

NO bro.. that is AM3/DDR3 board, cnt fit urs...unless change to AM3 chip..~
if u get its bro m4a78-e, that will be not nice due to the stupid GC slot(master at bottom )

welcome sir!
i would say board with ACC will help ur phenom architecture chip OC futher...
which mean only board come with SB710 and SB750 support ACC feature.. hope this help.

wow, i like ur explain way bro ur word is soo nice

its too bad Abit stop production, else it would be our best budget choice.. am i rite??
even i nvr use it, but seem heard a lot of its positive support word since im here..

well, sir, if u dun mind do a small top up, BIOSTAR ta790gx 128M should be nice match with the 7750BE, IMO laaa

but gotto do some trade off if getting 128M
(GC primary slot at bottom, CMOS jumper will get block IINM, else it is a nice board thou )

_________________________________________________________________________________

BTW, i spend a few time to ply with my chip,

found out:
3360 | 1.400v (#core0 pass, #core1 not exact in round)
3360 | 1.425v (passed)
3375 | 1.425v (passed)
3390 | 1.425v (#core0 pass, #core1 not exact in round)
3390 | 1.450v (passed)
3405 | 1.450v (#core0 pass, #core1 not exact in round)

** tested with HyperPI 0.98b running 1M calculation only#
**settting: cpu multi x15, HTlink multi x4, ram setting at 533 stock timing only#
*test stop at 1.450v coz that is the max voltage in AOD only#

i would say its not easy for me to get 3400 prime stable coz seem 1 of the core really not that "gem", only 1 core can do a good job even with low vCORE..
i may get better result if i disable 1 core.. any idea?

This post has been edited by cdlim87: Apr 30 2009, 09:55 AM

bro u looking for this?


edit:
ya, i js learned it...

______________________________________________________________
updated:

with disable 1 the stupid core...
i oni need to pump voltage to 1.425v when increase frm 3435 to 3450MHz;
which compare to b4 1.425v is need de for the stupid core at 3360MHz.

mean at the stock 1.4v, #core0 can do around 90MHz better then #core1

This post has been edited by cdlim87: Apr 30 2009, 11:12 AM

thats y got LYP trip rite

yeah.. i oni slow slow learn lo... msconfig//regedit
registry act can do many ting.. mau kasih itu vista frm tayar 22 bcome bike oso no prob ler

______________________________________________________________________________________

MSI DrMOS vs power mosfet (PWM)



DrMOS much more cooler thn normal pwoer mosfet

This post has been edited by cdlim87: Apr 30 2009, 01:31 PM

come come... a lot of food here sponsor by shinjun

u r our food sponsor... alll hope drop on u now..!!

x dtg II no III



zalman nice looking... ^^
but OC cnt kaw kaw la... no LN2 cnt kaw kaw..

change mobo

u ask menteri food "shinjun "

funding funding funding hit a FXB, u will happy 4ever



eh, bro, want to ask u.. ur MSI mosfet is DrMOS rite? do u read the temp of the DrMOS? hot or cool?

interesting in DrMOS now..

org x dtg x pa... janji itu food come can oledi
Rm250 enuf