Yeah!All hail Propus!

lim..whats the Dota thinggy?Addicted le meh?

Bro ur using whut bios version,try to flash it to new DK bios version 20/1/2009 and see how the diff...Ekekekekeke....sapa la mamat bertuah tu...haishhh...melepas aku....

ILL BE BACK to bro sepul but this time verdict says it.....

This post has been edited by verdict: Mar 9 2009, 11:22 AM

klu pakai pam beskal oxidize terus board aku kang

@verdict im using 16/1/09 bios

dude..is that bios version that bro ah_khoo show up that day???

Or this is from DFI site it self???

Why dont you try to use the latest one like im using it now...

lolz... only for downloading latest map there...

im using beta bios..

didn't realize the new official bios already out (20/1/09)

will try that

This post has been edited by pikacu: Mar 9 2009, 01:22 PM

no, noctua is not available here. i swap d lapparty cooler w/ cm chipset cooler, placed a 40mm fan on top of it. temp wise it managed to bring down around 5'c only, not really gud but w/ deneb d temp is much cooler.

mane i punyer blend test bro...

there's no nb voltage readin bios/os so one can't really determine d value ubless they take a look at d value set in bios/thru aod. chipset temp is always d highest temp of all, even hotter than chip temp...

d beta bios i posted is optimized only for tri-core denebs, not for high end chips like you all...

This post has been edited by ah_khoo: Mar 9 2009, 01:33 PM

tried the latest official bios, IT ROCKS

I can pump voltage to the nb nao(currently running at 2400Mhz @1.29v)

For those new DFI 790FXB/790GX user that have problem with PCIe slot (GPUz give 8x reading or PCIe x16 with non 2.0), you need to manually go to bios, advanced chipset->PCIe setting->Select any PCIe lane u used->GEN 2 mode = AUTO (default is disabled)
*Make sure the jumper is on GEN 2 jumper*

With that will get full PCIE2.0 @16x

(i hope ah_koo help post this at DFI forum since i got no account at there

(Problem solved with latest bios) Yeap, no nb voltage reader but, can test test mah...it is weird that at stock voltage, i go as high as 2200Mhz but with 1.4v pumped, i can go as high as 2200Mhz too

This post has been edited by pikacu: Mar 9 2009, 02:01 PM

i always set it to 16x instead of auto, learnt d trick last time when i was on abit ax78.

nb would be d last stage of deneb oc imo, deal w/ either chip or ram oc 1st, after get d 2 sorted out then only play w/ it.

This post has been edited by ah_khoo: Mar 9 2009, 02:08 PM

No..not the link width, the GEN 2 mode that is located at the top most in the bios setting.

Last time i got problem which
1) first slot is 8x (1.0)
2) second slot is 16x (1.0)
3) third slot not sure

but after enable the GEN 2 mode..
1) first slot not sure
2) second slot is 16x @2.0
3) third slot not sure

Im running on stock clock right now (doing work, lazy to re-set the time/date ) so i juz increase the nb freq

i forgot what's d namin but there are 4 options avialble. 1st option set to auto, 3rd option set to 16x (applicable to 1st & 2nd slot).

deneb @ stock, wat a waste bro...

Im not sure about others but my board default setting comes with the 1st option = disable
i decided to try set it to auto after seeing others got same problem as mine at dfi forum
sekejap-kejap jer neh

so do u try any spi result?
is there any diff b/ween stock NBfreq and OC'ed NBfreq?? show some ss if possible

the difference ..

1800Mhz


2400Mhz

even with a small improvement but that was great...!!
coz every thing is run at default except NBfreq, if OC with CPU+RAM, the improvement will be a lot better...

i wouldn't call 1s + improvement w/ same clock + ram speed as small bro. heck, for not so overclockable amd chips , one need hell of works just to gain 1s improvemnt.

iianm, nb freq is related to l3 cache. so higher freq = better performance. pls correct me if i'm wrong...

This post has been edited by ah_khoo: Mar 9 2009, 06:01 PM

To Bro ah_khoo and pikacu...thanks for the info guys...

Really appreciate it...DK user always wanna make one and another helpful....

Yeahhhh !!!!



One more thing, i have no time at this moment bro ah_khoo...later i will do the blend test...

This post has been edited by verdict: Mar 9 2009, 06:38 PM

Pikacu u 940BE wat temp is it?
Idle & Full load temp?
My Z-600 efficiency is not very well
do you have any cooler can suggest?

on what setting/clock/voltage?

if stock, the idle around 34~36( core temp), and load around 4x (core temp)

as for the acpi reading, it is around 26 on idle, while on load around 3x.

cooler suggestion, if you wanna go for the best on air, go for thermalright TRUE

This post has been edited by pikacu: Mar 9 2009, 06:57 PM

There is my temp in full load in 20C air-con room

Idle mode around in 35～40 when open CnQ