hang dah cuba tengok hand brake dah lepas ke belom?

perhaps resetting the ECU may helps? try running PDT (proton diagnostics tool, IIRC) and check for any errors

how much is the full body spray? completely change to new color or still maintain the same? include minor cosmetic works such as small dent repairs, deep scratches, watermarks, etc?

---

Added on March 17, 2009, 10:00 pmopen up the plastic shell and get to the copper connectors. it's pretty straightforward. u may need to break one tiny clip holder just to pry open the switch.

then sand paper the copper connectors. usually, the copper contacts are covered with carbon (due to sparking?), then clean it with some turpentine or whatever you have. it should work. i have to do mine every 5 - 6 months since the carbon build up covers the electrical contacts

This post has been edited by lucifah: Mar 17 2009, 10:03 PM

guys, i'm planning to do some update on the waja's front end to follow the new waja campro cps

how much is the new waja campro front bumper, bonnet and grille? anything else that i need? the existing headlamps / foglights still can fit the new bumper/bonnet?

try to avoid directional threads... u can't rotate the tyres (only fron front to rear, but not left to right). very troublesome if u have uneven tyre wear or need to swap the front left to the front right

anyway i'm using the cheapest diectional thread (RM170 per pop) - the sime tyres astar 300 (195/55/r15). seems kinda good for normal driving even when very heavy rain. no aquaplaning even at high speed

---

Added on April 25, 2009, 12:27 pmmana itu filter? if really got, mebbe it's time for me to change. very allergic to dust and mites lar...

This post has been edited by lucifah: Apr 25 2009, 12:27 PM

managed to get an almost brand new persona allow wheels to replace my dented waja wheels

question:
1. spray it according to body colour?
2. leave it?

black / white is not an option. anyone had sprayed their wheels before? the cat tanggal tak? how much per piece? and should i spray the inside and the lip of the wheel too?

IINM, its written as galaxy grey under the hood



photo still with the old wheels. the new wheels want to spray 1st b4 mounting

This post has been edited by lucifah: Apr 26 2009, 11:07 PM

wah lau... ini waja 1st version and u only have 69k mileage on it?

18k to 22k per year is kinda the norm for average. 25-30 for heavy... hang punya baru 13k setahun

have some urge to facelift my waja a lil bit. how much are these, and who's selling?

1. monochrome proton logo, compatible size for pre campro waja (steering wheel, front bumper, reat bonnet)

2. the 5-button panel (alarm, hazard, fog, demister, blank) - anyone can get them cheap? i last saw someone sell it for RM250 per piece

3. waja campro CPS front bonnet and bumper set- how much are they? will my old headlights and foglamps fit? ( i hate the new 2-hole foglamp/signal indicator from the campro cps upgrade)

---

Added on May 24, 2009, 1:24 pmwow.. prject cleansweep. if i were the thieves, i'd go for the precious ECU, wiring loom, and the auto gearbox - but that'd mean bringing in the car to the workshop for specialist to dismantle.

haiya... waja is so vulnerable to thieves

This post has been edited by lucifah: May 24 2009, 01:24 PM

are they for the older, pre-campro sizes? (smaller)

if yes, how much is for the three logo? and who's willing to help me post it to ma place in soviet sarawak?

berapa tu bang? got full set ka? for steering wheel, front and rear?

mind buying a pair for me and courier it over to the other side of malaysia?

most high end pirelli and michelin tyres are made from thailand rubbers... just that they export the rubber to italy / france before turning it into those tyres with nice smelling burn smoke

still the same... nothing concerns the size. bigger sized tyres means more air will go in to achieve the same pressure

29-30psi all round for typical use

i'm running 32. the car "feels" lighter - albeit bumpier. also, i'm on new wheels, since i banged my old OEM waja wheels badly a few times over small potholes at high speed. hence the higher tyre pressure

selangau to tatau

big potholes. most of them i could swerve, but when there's an incoming bus or truck, u got no choice...

plus the massive land slides early this year

i'm quite interested in the leather seats. free pos biasa to sarawak eh? wonder if it applies to the seats too...

i plan to smoke my headlamps too, but wondering how it will affect the light intensity esp at night

since the chrome reflector does the job of reflecting and concetrating the lights from the bulbs towards, what happens if it's smoked?

edit: can you also show us how you pry open the lamps? and do they get foggy (water vapor) since?

This post has been edited by lucifah: Jun 13 2009, 12:21 AM

ah... nice info

time to take out them spanners... la la la ~~

oh, i need a few more info
1. what kind of spray u use? high temp spray? do they flake?
2. any water vapor? esp after cleaning the car with high pressure jet?

duh...

am i the only one who thinks that smoked headlamps rocks?

rather than paying rm600+ for a taiwan-made smoked headlamps (include them nice angel eyes), i'd pry open it myself and spend rm 10 on a can of flat black spray

This post has been edited by lucifah: Jun 13 2009, 05:47 PM

ada photo? since my car is the same color too, so i can see what other options i have other than black