QUOTE(tryifelsecatch @ Apr 13 2009, 06:45 PM)
hi penangKia:D
I am a P5Q3 user and first time Asus mobo, unfortunately i am having some issues, hope you guys can help.
i had created a thread HERE
basically 2 problem:
1. no beep sound when i don't attached RAM and boot.
2. go into BIOS and change any single thing (e.g. disable floppy), Save & Exit from BIOS, system power down to reboot, but it will not boot up. fan everything moving, LCD screen blank with the LED on standby.
i had tried clear CMOS with moving jumper, even replace the mobo battery. but no luck so far.
here's the spec:
CPU : Q9300
Mobo : P5Q3
RAM : DDR 1333Mhz 1GB X 2
HSF : CCF
HDD : 1 SATA 300GB
GPU : IceQ HD4670 Turbo (OC 780-->810MHz; 1000MHz-->1100MHz)
PSU : Thermaltake TR2 RX 550W
thanks

First of all,u just boot ur pc (i assumed ur pc can be booted cause the condition 2 said that the pc can boot into bios.) dont change anything in bios and load setup default.I am a P5Q3 user and first time Asus mobo, unfortunately i am having some issues, hope you guys can help.
i had created a thread HERE
basically 2 problem:
1. no beep sound when i don't attached RAM and boot.
2. go into BIOS and change any single thing (e.g. disable floppy), Save & Exit from BIOS, system power down to reboot, but it will not boot up. fan everything moving, LCD screen blank with the LED on standby.
i had tried clear CMOS with moving jumper, even replace the mobo battery. but no luck so far.
here's the spec:
CPU : Q9300
Mobo : P5Q3
RAM : DDR 1333Mhz 1GB X 2
HSF : CCF
HDD : 1 SATA 300GB
GPU : IceQ HD4670 Turbo (OC 780-->810MHz; 1000MHz-->1100MHz)
PSU : Thermaltake TR2 RX 550W
thanks
then,get other brand or model psu and boot ur pc,then go inside bios and change something that caused the pc unbootable last time,save and exit and wait for reboot,see is it booted?
Apr 13 2009, 08:15 PM
Quote
0.0295sec
0.91
6 queries
GZIP Disabled