Hi, anyone can tell me how to reset the whole iPhone (meaning to clear of all datas in the phone including mp3, photos, settings, etc) to factory default?

Go to setting- reset- erase all content and settings.

Guys i got 1 question..
y after i jailbreak.. i cant seem to call out oledi one?
my operator logo & the signal is not there..

@milky

Do eleborate more on what u did when you JB. Plus, can use this format below to write your queries/problems so that everyone will have a better understanding on how to help you further.

1st/2nd gen iphone:
firmware:
problem detail:
screenshot (if you have):
comment (other info):

Thanks

This post has been edited by davidgary73: Nov 2 2008, 01:29 AM

1st/2nd gen iphone: 2nd GEN iphone sg set
firmware: 2.1
problem detail: right after i jailbreak there is a pop up ask me to unlock my sim vis using pin code.. after i enter there is nothing on the top left corner with the operator signal bar only 1 only.. i cant seem to call out or sms out..
screenshot (if you have):
comment (other info): Regarding JB right after i update my firmware from apples i jailbreak.....i did all the procedure from the Iclarified

This post has been edited by milky: Nov 2 2008, 01:34 AM


Attached thumbnail(s)

@milky

What did you use to JB and Windows or Mac platform?

Quickpwn should work unless you did not tick unlock option.

This post has been edited by davidgary73: Nov 2 2008, 01:39 AM

Windows Vista
& using Quickpwn

Redo Quickpwn again n make sure all steps are correctly followed accordingly with iclarified guide.

do i need to take out the sim card 1st?

Don't need as most of us JB with simcard in the phone. Sometimes simple solutions like taking out and inserting the sim back to the phone might work in some cases. Do try before proceeding to repwn your phone.

Anyway, since you're already on Fw 2.1, launch quickpwn and proceed JB. Just follow closely to the guide. Hope you can have the signal back.

If you're still do encounter the same problem, do look at 1st post of this thread and read no15.

This post has been edited by davidgary73: Nov 2 2008, 01:53 AM

i oledi... jb again still the problem arise... hmm.. u ask me to read no15 but got 2 no15.. is it about the community service from the hanz?

Ya..Community service from hanz. Sorry, will make the correction. Thanks

Cheers

This post has been edited by davidgary73: Nov 2 2008, 02:22 AM

This is weird, seldom heard ppl has this issue but before FW2.1, like 2.0, 2.0.1 and 2.0.2, a lot of ppl tick the activate option when JB, normally this will occur. Hmm.

David, just some suggestion on how forumers should post their Qs with designated template as below.



Example :
iPhone Generation : iPhone 3G
Current Firmware : 2.1
iTunes Version : 8
Computer Platform : Windows XP Professional SP2
Jailbroken Unit : No
Problem Encountered : Failed to jailbreak using QuickPwn
Steps Had Taken (list down) : N/A
Problem Screenshot (if any) : N/A
Other Info / Remark : N/A


Having the above template as a guideline, this will reduce the insufficient of information provided by the user.
With some "must have" information, forumers can easily provide them solution or suggestion straight away,
rather than have to ask for more.

Thanks friends. Made the changes on first post. Hope more forumers will use it. If they don't, we knw they are not reading the pinned threads..hahhaha.

yeaa... it is too obvious by then if they don't use the template to post their Qs

I added this too on first post as which was suggested by potion.

For new post thread, pleae use the following:

Want to ask use<wta>, new information use <info>, discuss use <discuss> and problem use <problem>.

WTA - subject/topic

*This may not be approve by admin. So, may not use it but is a very good suggestion always.

This post has been edited by davidgary73: Nov 2 2008, 03:31 PM

now i read all ur information given..very worth for dummies user like me...just bought 1 iphone 3g..but still cannot get that phone yet coz at my bro hand..any problem i hope bro david or any1 here can help me...

Thanks a lot for all effort TS given here..

one dummie signing in

iPhone Generation : 2 gen
Current Firmware : 2.1
iTunes Version : 8.01
Computer Platform : mac
Jailbroken Unit : n/a
Problem Encountered : my cover flow pic for albums all jumble up, somemissing, all sorts of weird picture tat doesnt tally with album
Steps Had Taken (list down) :
Problem Screenshot (if any) :
Other Info / Remark :

tolong tolong

rx330,

perhaps u need to redo for your songs album cover....
how can it be jumble up ? I never have such problem before....