updqated new bios for ta790gx 128m

hmm few changes made : a cpu perfecth added & also ram speed config

after bootup seems that my oc setup cant use cpu configure 4 anymore it wont boot now only can use configure 1 only if select configure 2 will boot but only until windows load then restart

even ram speed i cant use ddr2-667 can only run @ ddr2-400 & ddr2-533 at this timing 4-4-4-8-12-2t

This post has been edited by sepulgilo: Nov 11 2008, 12:17 AM


Attached thumbnail(s)

ok need help here
why my rams cannot boot on dual channel?
only if use single channel then can boot

dunno wat screenie too put
so i juz put this

try each ram slot , put 1 ram at each slot and try to boot..
Maybe this can detect if ur ram slot error..
Go for RMA lo.

yup try each slot edi...if single channel ok
dual channel no no
maybe rams prob?

Try other pair of ram first ..

try memtest

kinda hard coz i dun hv extra pair of rams

will try dat one after this...but should try each at a time
or put both but on single channel?

you slot ur ram on which chanel abcd =ab or ac or bc or bd

dual = ab or cd
single = ac or bd

rite now on bd

like mine ac < black slot bd< yellow

Ok.. I can lower my HT Link and NB multiplier
But what did you mean by NB > HTT.. in terms of total Mhz?
What's the max I should be hitting to ensure stability?

I've reduced by CPU multiplier to 10.5
225 FSB x 10.5 = 2.362Ghz

HT and NB is running at about 1800Mhz.. but still can't really boot up
My vCore was Auto.. at 1.264v (not enuff juice? shd i crank it up?)
vDimm at 2.0v

Am I doing something wrong here?
Oh yah.. X4 9550 too...

Slot it to 1st 2 slot (AB) and see it can boot or not.

-pWs-

i stuck at 2.6ghz....what should i do to go further??


Attached thumbnail(s)

Please use latest Memset (3.59)

-pWs-

1. lower ya ht link, keep it below 1800 if possible.
2. loosen timing, especially trfc if ur usin value ram

need sometimes to recall d memery bout ax78, i'll update u once i'm off from vacation mode...

got r memset 3.59??
i search the net..latest 3.5 only...its the one that i'm using...

This post has been edited by spadecrew: Nov 11 2008, 07:53 AM

http://www.xtremesystems.org/forums/showth...t=92190&page=41

-pWs-

ok..got it.....here my new ss..
one ques...the ss i post before i put my ram on 4th slot...memset show 1:1...
now i put on 1st slot...memset show 1:2...why r??

This post has been edited by spadecrew: Nov 11 2008, 08:23 AM


Attached thumbnail(s)

NB multiplier must be bigger and HTT multi
vCore up to 1.45 still consider okay for 9550, but increase it slowly
What ram are you using now?
Let CPU multiplier stay at x11
Can try set ACC to all cores at 2%...
You have CPUz (CPU + ram) screen shot to share with us?

im so suck with this board why ahhh

---

Added on November 11, 2008, 8:33 ambro ronaldjoe have u try new bios?

This post has been edited by sepulgilo: Nov 11 2008, 08:33 AM