i close for a moment.. due to several reason..will open n bump next month...

This post has been edited by xixo_12: Sep 17 2008, 09:04 PM

DaTaBaSe UpDaTeD

xixo_12

thanks xixo_12
i will not stop here.. will try to push higher..

i hv 1 question.. my ram bought from bro dblooi.. can clock to 1066mhz using p35 chipset. i've tried several time but cant clock 1000MHz n more with my setup.. the closest i can get is 969Mhz (stable) but 1000mhz will hang up at window start up.. is that bcos a limitation of my mobo or something else?

How much vDimm??

-pWs-

how about ur ram timing ? loose or tight ?

at 969mhz is 1.95V. it should be able to clock to 1000mhz at stock voltage (according to bro db) i already ask him but just want different opinion.. already loose the timing to 5-5-5-16 26-2t.. tras only can get 16 coz bug with my mobo.. (always 2t lower than the set value) latest bios also dont fix this.. afraid to try modded bios..

Hard to say bro.
It depends on Intel or AMD system.

If bro dblooi can achieve that in the Intel system, you will need higher vDimm in AMD system.

-pWs-

that wat he say too..amd sometimes really hard to achieved 1000mhz.. hmm.. ive tried 2.1v but fail orthos after 15min.. afraid to go higher coz might burn the ram.. is there any possibility that my mobo is the cause?

it depends on how gud d imc of your chip too. other than this, it could be ya board (chipset) issue.

imc is in the processor rite? should i increase v core too?

Here my screeny.. update pls..







Attached thumbnail(s)

need to know more bout dis.....
does it need to be same speed as cpu clock??

This post has been edited by hazwan_aviator: Sep 18 2008, 06:14 PM

i have a question here..
if i set my hsf fan to 100%, will it shorten my hsf life spand ?

thanks

@hazwan_aviator
no need.. u can refer to the 1st page regarding the ram divider..

me doing 1000mhz at 2.05v vdimm..

passed orthos >1hr.. later i post screenshot

pls do i want to know ur memory timing also..

thank sarahlah

If I were you, I rather make my HSF run 100% than my processor high temp.
Got what I meant??

-pWs-

with same speed proc ..the higher ram speed is much better performance

250 x 12 = ram speed is 1000mhz
231 x 13 = ram speed is 858mhz

u can try SPI 1M with both setting u can see the different

This post has been edited by digswell: Sep 18 2008, 07:29 PM

Latest screenshot: