any sifu here.. help me pls? i hv a question about temperature.. my concern is temp on core#0 is way higher than core#1 (about 8-10 degree different).. i took the reading from cpuid hardware monitor.. is there something wrong with my proc? rite now i oc to 3ghz (273x11) @1.4V..

hmm.. so how to know the actual temp?

Here the ss..

Link

sori for the late reply.. mine is brisbane..
ss of cpuz..


Attached thumbnail(s)

then how to check the actual temp?.. as menchelsea said?

ok.. thanks everyone

to bro ah khoo..
wat is the safe voltage for athlon x2 for daily use? im currently using 1.46V @3.1 Ghz

to bro menchelsea..
wat voltage u use to hit 3.3Ghz?

at stock voltage can get 2.8ghz. at 1.376v can get 3ghz.. is this ok?

stock is 1.296v.. but my mobo show lot of vdrop.. about 0.02v

1.54v is quite high.. want to try but at 1.5v temp alredy hit 50c on load.. afraid to go further.. nice oc bro..

ya.. sumtimes reach 70c.. really scary.. is that ok? my ram bought from bro dblooi.. can clock to 1066mhz..

idle is around 55c.. 70c when playing games.. but sure really hot.. if i chnge 2 aftermarket cooler how bout warranty? n bro ah khoo.. wat model ur cooler is? n how much?

i hv 1 question.. my ram bought from bro dblooi.. can clock to 1066mhz using p35 chipset. i've tried several time but cant clock 1000MHz n more with my setup.. the closest i can get is 969Mhz (stable) but 1000mhz will hang up at window start up.. is that bcos a limitation of my mobo or something else?

at 969mhz is 1.95V. it should be able to clock to 1000mhz at stock voltage (according to bro db) i already ask him but just want different opinion.. already loose the timing to 5-5-5-16 26-2t.. tras only can get 16 coz bug with my mobo.. (always 2t lower than the set value) latest bios also dont fix this.. afraid to try modded bios..

that wat he say too..amd sometimes really hard to achieved 1000mhz.. hmm.. ive tried 2.1v but fail orthos after 15min.. afraid to go higher coz might burn the ram.. is there any possibility that my mobo is the cause?

imc is in the processor rite? should i increase v core too?

Here my screeny.. update pls..







Attached thumbnail(s)

pls do i want to know ur memory timing also..

i bump into this thread ( nf680i oc) n there is some memory timing explanation.. its for intel platform but i dont mind trying.. finally i did it! here the ss..

---

Added on September 18, 2008, 10:18 pmthnx bro.. do u hv any memset ss ? want to see all mem setting if possible..

---

Added on September 18, 2008, 10:30 pmthx bro

This post has been edited by sharkeer: Sep 18 2008, 10:30 PM


Attached thumbnail(s)

tq for explaining

bro ah_khoo.. i want to tweak the timing a little.. where should i start?