bro digswell better don't discuss it openly..

well, the temps put me off to push higher, so i will stick to 3.1 for now..

Only 50c for cpu.....still can hand it ...is ok at least is no over 65c

Trust me
1.3V Stock cooler can still withstand with 1.3V.Max around 70C Load only..

70'c load is on d extreme side bro... i wouldn't take > 60'c load temp for chip...

w that kinda temp, u can hardly prime stable too...

Oh for you lor
Actually i mean still 1.3V is around 60 sth like that lah..I forgot edy..
For me,i didnt really use Prime for stabling.Either by extracting or anything that can stress 100% for processor.

lol u rite ahkhoo.. with stock cooler i up voltage to 1.3v temp was 65c! no go. better b safe than sorry...

maybe tonite i will borrow my frens geminII and see how it goes..

if u can't be prime stable, u can't really consider d oc setup is totally stable...

heck, even prime stable oc'ed setup can crash sometimes...

ya 3.4GHz is not prime stable then...

Mine stable o
Just always forgot the put a screenie
I wonder why CPUZ reading wrong for my vCore..i set 1.47V in BIOS but CPUZ read 1.51V..Same with other software
Btw,for me if cannot prime stable but doing other things is stable its still stable what
No crash,no BSOD and others thats fine for me..

since it's prime stable, u can always do d ss anytime what? 1 hour is not too much to ask for...

Will do once got the rig back.No i did priming it for 12hours(before sleep).Then after orthosing it,i went sleep.Tomorrow wake up,i press stop and exit without SSing it

yesterday i up voltage a bit for 3.2, stable for more than 1 hour, but after a while pc froze, then restart while playing dota.. it was either wasnt stable or my gc the problem.. so for me a stable oc should at least stress for minimum 8 hours... or possible 24hours. .

that's my point, even an oc'ed setup which can prime stable 1 hour has d possibility to crash , what more those which are not primed? 1 complete loop of prime will do imo, that's about 3 hours...

wanna ask...

what is:
1.prime
2.SS
3.BSOD
4.in bios,my HT link have a fix number such as 200,400,500 until 1G....y can i change it to i.e. 506,1.2Ghz....it dis bcoz of my mobo....
5.is there any HSF for NB

thank....

prime = prime 95, it's d common tool for stability test.

ss = screen shot

bsod = blue screen of death

that's referrin to ht multiplier, for x2, 1000 = 5x, 800 = 4x, 600 = 3x & etc...

yup, there're lotsa model available, but not all can fit all boards...

This post has been edited by ah_khoo: Sep 14 2008, 08:55 PM

thnk u....

Yesterday i am seaching LYP and IMBI to find NB cooler , but can only find CM Blue Ice and Evercool Sherphant.

Looking for Deepcool NB 8 .

Ending up buying DVDR and fan grill ..

Any one know where to buy this NB Cooler?

@its evercool serpent rite? does it comes together wif fan?

i think u can get 1 from moderno.

y dun u put a 40mm blowfan at NB? cheaper..

bro, for 770 chipset, d nb not so hot what? u aint need a super expensive nb cooler, a cheapo cm nb like this + a 4cm fan will do d job ledi... this is what i used when i was still on ax78...

lyp is sellin it @ RM15 only...