icic, im still noob in oc
tenkiu tenkiu

i still using noctua.. quad core seems hot though..
on average idle
68/58/58/58

on average load
78/72/72/72

core0 reports higher than others..

got other cpu temp also..
idle : 38
load : 52

weird.. which one to refer..

guys, if i use v8, i need to buy fan to place it beside onot?? or just v8 is enough with built in fan

as i far i know, u cant attach extra fan on V8 right?

the stock one is good already...

I've read some of the Xigmatek DK users can't get their full contact to the proc...Anyone have tried this cooler yet?

hey guys!

first time posting in cooling thread i would need some opinion abit i have recently sold off my zalman cpu cooler and i was thinking to get a cpu cooler replacement. i have CM V8 in my mind. however, my main concern is whether can i actually fit V8 into my mobo

my mobo model is DK 790FXB-M2RSH. i would appreciate if any owners of the mobo able to share their opinions towards any good aftermarket cpu coolers that they have used on the mobo. i have also attached the pic of the mobo model as below :



i'm afraid the CM V8 is not able to fit on the mobo due to the stock NB passive cooler (black color heatsink with "LANPARTY" red sticker) and the silver color heatsink any sifu can advice? i'm not really interested with CCF though

This post has been edited by ConquerorX: Jun 1 2009, 04:46 AM

most coolers shud be able to fit ur mobo imho.....

v8 shud not be able problem

wat's the current best cooler for amd platform?

CCF will do the job. If u want moar power, hassle-free,TRUE

---

Added on June 2, 2009, 11:00 amYes it can, i've seen review involved Cooler Master V8 pairs with DFI 790FXB-M2RSH.

Just key in V8 DFI 790FXB in search ,and u can have some results related to it.

This post has been edited by Syphon: Jun 2 2009, 11:00 AM

im using ccf...
quite happy... low idle temp and low load temp (test using prime95 within 20min)

idle..


load...


but then im using powerlogic azzura 2000 casing... CCF not fit properly inside my case.. I need to cut holes so the copper would not touch the side panel..



p/s : forgot to mention... Im not using tuniq tx-2 as thermal paste instead im using Cooler Master HTK-002 thermal paste (RM9)... Tuniq TX-2 already finish... ... My GC also using same thermal paste

---

Added on June 2, 2009, 1:00 pmShow ur CPUID HWMonitor pls

This post has been edited by wch5274: Jun 2 2009, 01:00 PM

I did do some research on that together with the help from ah khoo.. managed to find couple of users with CM V8 pairs with DFI LP DK 790FXB-M2RSH and a review with CM V8 pairs with DFI LP DK 790FXB-M3H5.. basically both boards have the same layout.. so I am pretty confident that it will fit nicely onto my board

Bought a CM V8 from zhen wei this morning from his office and hoping to install it within these few days. I shall post my temperature result soon here

Thanks for the help though

which is the best cooler for pentium D? my cpu can fry egg liao.... pls recommend. budget is rm200

give tuniq tower a try

i have a fren who tried that cooler on pentium D,

the result is even better than CCF lol

not sure why it only works for that particular proc

hi all, just a simple question.

anyone tried to power a 12v 80mm fan (molex connector) using a power adapter? the adapter is rated 12v as well and has 2 ends, +ve and -ve, so how should i hook it up with the molex? thanks.

hoho... long time nvr hv a visit here..
as a info for all... any1 interest on OC and to be sure for extreme(LN2) can PM me, i try reply as fast as i can... the date as show on my sig, this weekend sunday 14June09..!!! mainly is for AMD rig.. but any user is welcome...

eh...lu sudah pergi kedah?

then how u do gatehrinG?

a quick test of my own using TRUE and tuniq tx2

can test it on dota see how its performance.

true 120 vs ccf which perform better?