tak sempat...
setel d prob 2 ocolck just now..
after work will continue...

Cheapest board with VTT/GTL around rm350 exist?

Waiting patiently then

Ermm...can look for 2nd hand DFI DK P35 T2RS.
Price a bit more than your budget.

-pWs-

wohooo...
finally 450MHz stable. well, at least stable for 20 tests on IBT.
but have to increase vcore to 1.4v & ram voltage to 2.04v
temp reached 80C already.

450MHz x 7.5 (3375 MHz) - IBT 20 tests passed!



still can't passed ibt test above 450. first test failed already.

bro alf, share your setting here laa...
whats the vcore & ram volt that u use to get to 3.7GHz?
how bout the temp?
i can't get passed 3.4GHz. so mad!

---

Added on August 29, 2008, 10:34 amanyway, i got small problems,
after done doing this test, i seems to have problem opening the control panel.
and why everytime i boot into windows the first time, the multiplier shown is 6. after doing super pi or ibt test, then only multiplier goes up to 7.5?
my mobo is gigabyte p45-ds3.
is that the gigabyte energy saving thingy that come into way?

This post has been edited by manutd #1 fan: Aug 29 2008, 10:36 AM

Disable the C1E and EIST.
Need so high Vcore to reach that.

Mayb my Q93 babe also need. After work, go back try.

-pWs-

where can i find C1E & EIST?

In your motherboard bios bro.

-pWs-

i need that high voltage maybe due to the mobo.
vdrop: 0.04
vdroop: 0.1
during load, voltage drop to 1.3v
probably will try to increase to 1.5v just to check whether can reach 460-470MHz stable. but the temp reading holding me back.
scared when i saw temp 80+ already.

That is a lot of Vdroop.
What mobo you use??

-pWs-

Hmm what hsf you using ? I run 444Fsb at 1.25v and my temp also around 80C , but i m running fanless.

that's why. i also confuse.
though it's the reading from cpuz. no idea about the realt vdroop.
mobo is gigabyte p45-ds3.

---

Added on August 29, 2008, 10:50 amhow can you get 444 in only 1.25v?
need tweaking summore to check whether can be stable 450fsb at lower voltage.
my hsf is xigmatek s1283. from review, it should be good hsf rite?
maybe it's bcoz of my high voltage.
coz @ 440fsb 1.25v, the temp is around 72-73 max.

This post has been edited by manutd #1 fan: Aug 29 2008, 10:50 AM

My Q9300 438FSB at 1.152v

-pWs-

why i need that high v core.
@ -pWs-:
you set vcore manually?

I will try to share it tonight if possible.
but most of the setting i leave it at auto 1 lor...
and 3.7 just manage to boot in awhile only then hang zor.. hahah

Q9450 4.0ghz run 500fsb with superpi.. minimal tweak... lazy

CPU-Z Validation

<- Click for larger image

This post has been edited by IcEMoCHa: Aug 29 2008, 11:20 AM

Omg 500FSB. Mind share you tweak?

^
nice!
wish i have higher multi.
but 500fsb!! daymn.
how's the temp? on your siggy u're using wc. must be cool enough then.

Yup. DFI style is VID add one.
That meant I added 0.35mV.

3.7GHz? Q9300/X3320??

@IcEMoCHa
Mind to share w us your setting??

-pWs-

will try disable C1E & EIST first tonite.
probably the cause of instability since vcore must be pump everytime cpu goes from idle to load.
hopefully problem can be solved asap.

x3320