then increase the stock laa...

me now stuck in office. can't wait to go back & tweak again.

vcore 1.35v
idle 53, load 7x ++

Haven't burn with IBT yet. I know i need vcore of 1.4v to pass it. Not feeling up to that sort of voltage yet.

ur stock can go how high??

haven't check how high my stock can go.
i still enable the C1E & EIST so vcore increase as fsb increase i think.
will try tonite.

as I promised, here's the SS and settings.

PCIE Freq : 101
Vcore : 1.3 (in bios)
PLL : 1.8
FSB termination : 1.46
NB :1.34
SB: 1.30


Good luck!

This post has been edited by alf: Aug 30 2008, 08:14 AM


Attached thumbnail(s)

Vtt make sure below 1.4v.
If not, might end up w a spoil processor.

-pWs-

yes lor... it's abit higher d...
and also beware of the PLL... lol... gonna tune that off too~~


This post has been edited by alf: Aug 30 2008, 08:25 AM

Well done bro... now where's the 3.7ghz u promised
I doubt i'll stable 3.6ghz myself anytime soon

dun kill my proc lar..!!

Mine is prime stable at 3.5Ghz@1.24v. Prolly gonna be my daily use settings.
I'll try to hit 3.6 or 3.7 soon though =p

wa..all ppl here is having x3320 fever

n the load temps seems nice too....

This post has been edited by tkh_1001: Aug 30 2008, 04:23 PM

nice nice... share setting .. .kekek!

You can read the settings from the Tpower2 app in the screenshot =p
Other settings:

GTL1: 0.63
GTL2: 0.67
MCH GTL: 0.64
CPU PLL: 1.6

hehe thanks!

argh... my bios dun hav GTL setting...zzzzzzz

No prob =)
Eh P5Q got no GTL ref settings? That's terrible. Lucky I didn't buy one..was thinking of either my I45 or a P5Q Pro/Deluxe..

Your chip's pretty good though - 3.6Ghz without meddling with the GTL Refs.

ya lar... was intended to buy I45 1... but no stock... sigh!!
maybe P5Q pro/deluxe got qua....
rockrock recommended this P5Q only, so give it a try lor...

btw.. how do u test whether is stable not? just by running prime?

I heard after passed IBT also will BSOD 1 le...

This post has been edited by alf: Aug 30 2008, 06:46 PM

Wah,hit 3.5ghz liao
Any 3dmark06 with gx2 to share?

Ohh yup the other day when I went down to robyn they also had no stock of the I45. I was lucky bought it from another forumer heh.

I'm old school, so I normally test stability with Prime95. Will give IBT a try later kua. Surprising that pass will BSOD - i thought fail will BSOD =p

Aha priming with 3.6Ghz now. 3dmark in a day or so once I get the other settings sorted out - I reckon I can lower Vdimm and maybe Vfsb/Vnb a bit.
Going out soon too =p

Here's a screenie of 480FSB 3.6Ghz tho!

did u changed ur core contact fan ??