<cfg ho en 0> will do~

My Initial DM Command should look like this:

sf 0 2305000
sf 1 2315000
sf 2 2325000
cfg ho en 0

Multiple CPE users, please help me to verify. Thanks

slackinux. thats the only line I got inside..

where are u at slack? and do someting for me. when u had all those command in.. when its logon and on line. whats you see on the wiwax- satus.. Frequency Info ?

This post has been edited by slmike: Nov 21 2009, 10:48 PM

My one has 4 lines.

---

Added on November 21, 2009, 10:49 pmDifferent area has different Initial DM Command?

This post has been edited by slackinux: Nov 21 2009, 10:49 PM

My only have 2 line

sf 2 2325000
cfg ho en 0

---

Added on November 21, 2009, 10:56 pmToday the speed is ok browse internet no problem, but when buffering pps.tv still very slow and the download speed also. any face same problem?

This post has been edited by hong74: Nov 21 2009, 10:56 PM

ya I notice u had 4 line.
thats why I like to know whats you see on the wiwax- satus.. Frequency Info ?

if I am not wrong. each base station has a diffrent frequenzy those command are use to log you in to the station thats giving you a better result..
so if thats the case yes diffrent area would be diffrent..

What I know so far .... sf 2 will log u on to channel 2 sf 1 will be channel 1 those number following it is the frequenzy it is running on. I might be wrong. need to dig more info on it haha..

Same here at Sri Petaling.
Web page surfing very fast. Bittorrent download and pps.tv very very slow. The slowest i can get is less than 1 kB (kilo bytes).

---

Added on November 21, 2009, 11:17 pmMy area is Sri Petaling. When i have all 4 lines of command. My wimax status is fine, signal very good, everything fine.
Frequency Info should be Channel #2, 2325000kHz.

Right now, they want me to fix it to sector Number 1, easy for them to trace my connection. So my Frequency Info is Channel #1, 2315000kHz now.

This post has been edited by slackinux: Nov 21 2009, 11:17 PM

slack ic.. so I can see ur actually using sf 2 2325000 command.. thats for chan 2

anyone using channel #0 ?

Haha ,actually amax were also a big scam company .
It states no capping but pps/torrent are slow ,haha .Too many lies in M'sia ~

i agree with you.

the cap part I am not sure, maybe they dint cap only because of the network problem they having it is slowing down the connection... hope they solve those problem fast and the MSN problem..

This post has been edited by slmike: Nov 22 2009, 12:20 AM

msn problem ?anything wrong ?mind to tell me more ?

Mine is only 1 line (cfg ho en 0) using Channel#2, 2325000kHz

May i know what is this ?some sort of amax code?

slack look at page 53 Post #1053

the last line itself will do~ it's confidential information, so that's all I can say~ since u have 4 lines, how about trying to delete any of the lines above and test? just a suggestion~ the last line is compulsory~

Could this be the reason on the unstability of the connection speed ? It looks like it could be kept switching channels from time to time based no the command lines displayed, just a wild guess

even if u're only with 1 channel, your ip will continue to change

With Amax, it is very different from steamyx. Whenever i check my machine's IP addresss from http://whatismyipaddress.com/, it keeps changing whenever i refresh the page. Each time refresh, will obtain a different IP address. !!!!!!!!!!!
According to Amax technian, all the users use share IP address.
With streamyx, although it is dynamically asigned IP address to every user, every user should have their own IP address and won't change whenever you refersh http://whatismyipaddress.com/.

This explain why my VPN connection won't last longer than 5 minutes.
Any comment?

This post has been edited by slackinux: Nov 22 2009, 06:34 PM