Seems like it's really hard to find genuine 17 inch PCD 5x120 aftermarket wheels. Advanti and Konig distributors don't even want to bring it in here.

The only remaining options are to special order / ship, or probably approach DRC.

Gang, what’s the starting price for Enkei Tuning rims for size 16?

Any advice or recommendation for vorsteiner rim??

Guys, I'm new to car tyre stuff. I got question:

If my car tyre is 13 inch, but I wish to change sport rim to 14 inch (13 inch sport rim very rare to find) to look cooler, is that I need to change my tyre as well, then only can change sport rim to 14 inch?

Is it a must that the inch of sport rim has to same as car tyre inch?

When you upsize/downsize tyre/rim. You need to change both of them.

You also need to check that the width or the tyre fits to the width of your rim. You can use the link below as a guide:
https://www.tyres-pneus-online.co.uk/tyre-e...nce-advice.html

The new tyre diameter needs to be not more than 3% smaller/bigger than the original size. You can use the link below as a guide:
https://tiresize.com/tyre-size-calculator/

Ok. If need to change both tyre and rim, possible to trade in? If can, how to measure my current tyre and rim 2nd hand value?

It really depends on the shop.

Tyres I don't know much because the shops where I bought tyres never accept trade ins for tyres (maybe coz they're already worn out).

For trade in rims, it depends on the rim condition. It can range from rm200~rm1000.

Rm200 I managed to get for 15 inch rims. Rm900 i managed to get for 19 inch rims (should be rm1000 if not for the scratches).

Want ask I am pretty new in this sports rim section. I am looking into getting a sports rim so any recommended shops to buy from?. I did research la which mainly on rims made in Taiwan & Thailand. Another one is getting oem rims. Actually does it hv difference?

Depends on whether the rims are cast, flow form or forged. Cast being the most heavy but forged is the costliest. Most aftermarket rims are flow form now.

Do remember not to purchase imitation rims. If you want rims that does not cost a bomb I suggest to get rims that are made by legit companies like Advanti or Konig. AOW is quite good too but most of their designs are copy cats tho.

If not you can try our Malaysian brand Raxer!

Speaking of this, i find that choices for proton 15/16 inch 4 x 114.3 wheels is very limited.

I only able to find various copies wheel of famous brand and the closest one legit brand I can find is Advanti DST Storm as well as other model by Advanti.

If I am not mistaken Raxer wheel also have wheels in that specification too as well as 16 inch Enkei RPF1 which i dont think its suitable for daily driving

I not sure how their non DST (flow formed) model perform.

Specifically I am looking at S850 which look identical to proton R3 wheel which I believed Advanti was the OEM for them last time

I asked DRC wheel before for Forged 16 inch which roughly around 6K and few month wait time. To be frank I not sure if forged wheel will make any big difference performance wise vs regular cast wheel.

This post has been edited by minizian: Jun 3 2022, 04:52 PM

a good forged wheel is lighter and stronger than flow form, but the price is costly, lighter wheel is always better in performance because of lighter unsprung weight

if you are just for daily drive and not going to join any motorsport like gymkhana or track, then a cast wheel with your preferred design will do, but personally when i choose aftermarket rims i will go for at least flow form rim

Thanks for the reply. currently looking around for 4 x 114.3 15 inch wheels but the choice is not much as opposed to 4x100 ones.

Only brand that I saw selling flow form wheels for that configuration/size is advanti but it seems like they dont come with gunmetal and only matte black or standard silver

This post has been edited by minizian: Jun 7 2022, 10:57 AM

maybe you can try to look for AOW, NK Performance, or lenso, not sure what other options available for 15" since i'm using 17" and 18" myself

Weds's official website actually has a "Be careful of imitation wheels" page and specifically warned against AOW and NK Performance.

Link:
NK Performance
https://www.weds.co.jp/english/imitation_wh...-options-wheel/

AOW
https://www.weds.co.jp/english/imitation_wh...ptions-wheel-2/

Hey guys

I'm planning to upgrade from my X50 (215/55 R17). Eyeing either 18/19inch rims plus tyres.

Since I'm new to this I'm not sure how heavy this will be in terms of $$. But for me I'm always looking for cheap and good combos so I'll appreciate any recommendations and their price range. Definitely looking to trade in as well.

Thanks!

Cuz those 2 blatantly copy top brand wheels including Weds. I'd rather choose Konig or even Lenso than those fakes.

I don't recommend going up to 19 cuz the tire becom too thin profile (235/40/19), so your ride quality/comfort is severely hampered, plus the cost will be much higher. Max I'd recommend is just go up to 18 using 235/45/18, so still retain a bit of comfort and the cost is much more affordable.

Thanks! Any recommendations for 18 rims + tires? Cheap and good of course.

Rims I'd recommend Konig, Advanti, Lenso, or Raxer.
Tires try find Hankook or Falken.
Those are value for money but not cheapest. Never go for cheapest especially for tires.

Newbie here
Ayam 17inch rim ada deep scratch from kerb
Is it can be refurbish? Or better change new set?
How much is the price range?
Any reasonable rim shop in puchong area?

Hey guys , I bought a used Bmw F10 which owner installed a 20inch vossen rim which unfortunately to my disliking , also with slight positive offset …. If I understand ‘offset’ correctly , that means the rim is slightly inside the fender..

Any good choice for brand , and shop to recommend?
Budget around 3k-5k , dowanna spend too much. Cause contemplating to downgrade back to 19” after the tyres ran out, or stick with 20” with different design.

Mine is staggered.