Is there any actual 14 inch rim that is lighther yet strong than stock ones?

Is there such thing as performance tire for 14inch wheels? CUrrently rolling on xm2's

This post has been edited by minizian: May 3 2014, 01:02 AM

Thanks for the info ya. For your info the car i am currently driving is honda city idsi. current wheel is the stock 14 inch wheels.

Friend said if i upsize to 15 inch i can get better perfomance and better fuel consumption (Is it actually true since need more power to rotate the wheels?)

Speaking of this, i find that choices for proton 15/16 inch 4 x 114.3 wheels is very limited.

I only able to find various copies wheel of famous brand and the closest one legit brand I can find is Advanti DST Storm as well as other model by Advanti.

If I am not mistaken Raxer wheel also have wheels in that specification too as well as 16 inch Enkei RPF1 which i dont think its suitable for daily driving

I not sure how their non DST (flow formed) model perform.

Specifically I am looking at S850 which look identical to proton R3 wheel which I believed Advanti was the OEM for them last time

I asked DRC wheel before for Forged 16 inch which roughly around 6K and few month wait time. To be frank I not sure if forged wheel will make any big difference performance wise vs regular cast wheel.

This post has been edited by minizian: Jun 3 2022, 04:52 PM

Thanks for the reply. currently looking around for 4 x 114.3 15 inch wheels but the choice is not much as opposed to 4x100 ones.

Only brand that I saw selling flow form wheels for that configuration/size is advanti but it seems like they dont come with gunmetal and only matte black or standard silver

This post has been edited by minizian: Jun 7 2022, 10:57 AM

I also did the same even if it is proton.

Why would I wanted to give them opportunity to resell at a profit.

Between the 4x114.3 wheels in 15 and 16 inch flow formed wheel like Advanti Storm S1 and Raxer RP10x?

Yet to decide which size to go to as stock is at 16 inch.

If i were to choose either, here the tire size that I plan to run with
For 15 i plan to run 195/55/R15
For 16 I plan to 195/50/R16 which is what I am running now moving up from stock 185/55 (not planning to run 205/50 which is equal ratio to stock as it will make my car slower)

Which one would fit better iriz since without causing fender rub as they have different offset between 15/16 (eg S1 and RP10x in 15 is+35 while for 16 S1 came in+38 or +40 I not sure and +42 for 16 inch RP10X). Would love something in bronze but the market seems to prefer darker colour which I dont really like.

Other suggestion are welcome too, otherwise worse case I just get stock proton 15 inch wheel.

This post has been edited by minizian: Jan 20 2023, 01:00 AM

Stock wheel is 6.5jj which came in 185/55R16 but i upsize to 195/50R16 as performance tires only come in this size

Both of raxer and advanti jj value was like 7.0

If raxer 15 inch wheel come with 7.5 jj

Hmm i think both advanti and raxer should fit without much drama?

I actually looked onto putting spacer on my stock wheel to push outward but somehow there more than just about centre bore.

Asked h&r about one spacer which i think may fit my car but was told that spacer was specifically made for honda car as he pointed out some subtile difference in it

This post has been edited by minizian: Jan 22 2023, 07:49 PM

noob question, do you mean this bolt as per circled may be too short if I were to fit a 7.0JJ/7.5JJ wheels?


No lah, its just a simple mod to push the stock wheel slightly outer since it was quite inside.

The stock 16inch wheel design was not bad looking to be honest for me, just that the offset is a little too inside for my taste hence if I am considering the spacer option plus my understanding making the wheels outward would help abit on handling side too?

Manatau wanna buy spacer (just a simple slip on 5mm spacer) actually more things to consider other than just knowing what is the center bore diameter.

Also, I not sure if there any decent spacer maker locally who can build one that can withstand my rempit (since many article suggested that spacer was actually bad for suspension), that why I am looking at H&R spacer option but they seems like not making one specifically for proton cars

Plus weight wise i assumed it would be quite heavy.

Kinda suck that 3rd party wheels only come in either matt black or gun metal unless I go for custom wheel route which I am not prepare to spend it.

This post has been edited by minizian: Jan 22 2023, 09:59 PM

Hmm, can consider but the minimum spacer length is 5mm, does anyone can do lesser than that?