eh ya ka?so sorry..i will check again

i know but how to oc w/o increase any v???need to -ve ka?hehe

u -+ abit should ok rather than do it auto..
afterall got vdroop also..

I am using q6600 fsb at 355 now vcore at 1.3... So I want to increase the vcore so i can get more stable clocking.... ....

blargh.. im still playing with gtl ref voltage... trying to get lowest vcore and stability...

i'm tweaking the ram.. lol if u leave it auto.. it's hard to get >1k
so noobs beware..

what's gtl ref voltage for?

http://www.edgeofstability.com/articles/df...5/gtl/gtl1.html

my E8500 suicide shot with 617fsb


Attached thumbnail(s)

@rlhc17 : nice one there.what's the vDIMM? any chance to push it any further?

vdimm 2.5vdimm
620fsb max boots from bios

my i45 board not change FSB:DRAM
always 4:5

if change 1:1 fsb:dram; not boot board.
one second online led. next stop.

how change 1:1 FSB:DRAM
thanks.

This post has been edited by bahattin: Aug 21 2008, 03:38 AM

ye? what u do? how come cpu-z not support?
1.4v? 2.1ghz.. 1.5gb ram DC.. pening edy..

look @ others setting la..

@bahattin
post ur setting using this template

[BIOS SETUP] O.N.E
Over-Clocking Navigator [Manual OverClock]
Intel® SpeedStep™ :
Ratio CMOS Setting :
CPU Frequency Setting :
Over Clock Retry Count :
FSB(Bsel) To NorthBridge Latch :
DRAM Frequency :
DDR2 Enhance Mode :

DRAM Timing Configuration
DDR2 RCOMP Configuration :
Static tREAD Value :
Configure DRAM Timing by SPD :

Clock Gen Configuration
PCIE Frequency Setting :
CPU Clock Skew Control :
(G)MCH Clock Skew Control :
CPU Clock Driving Control :

Voltage Configuration
CPU Voltage :
DDR Voltage :
Chipset Voltage :
FSB Voltage :
CPU Core1 GTL Ref Voltage :
CPU Core2 GTL Ref Voltage :
MCH GTL Ref Voltage :
CPU PLL Voltage :

just finish assembled my new mobo. wt my current setup, i hv no choice dat i hv 2 turn my TR-IFX14 cooler d other way round (vertical or horizontal <= not sure). now d airflow is going up to d psu instead of 2 d back of d casing . tis was due 2 space restrictions of my casing. hoping dat d psu & top case fan will ventilate d heat fairly.... or else just change 2 new smaller cooler... dang!

can i join in? below is my tiny rig



forgot ss for spi 1m. erm.. juz post diz out.got my time record there.



cdt to bro a1098113 for helping me even tho not much but thx for clue
FYI,im still new to OC thingy. learnt it for 2 months

how much this mobo? where got sell? tq

can get around rm480-490..
try ask forumer here Lehteck

want to ask something regarding to this board...does the tpowerII give actual cpu temperature reading?

normally the measuring diode is located near cpu socket and assume it's cpu temp, which is not accurate.

afaik, mobo cant give temp reading based on cpu internal diode, the TJmax reading.