this board can fit with noctua or not?

it's fit.. tq 8tvt

where to disable the raid detection @ bios?
kinda boring with raid checking while boot up..

should ok.. coz the mobo heatsink are not skyhigh..
the only worry if it's touch the psu.. but it's depend on casing though..
my noctua just a few mm gap from psu...

---

Added on August 6, 2008, 9:27 amcan't elaborate more coz not yet try..
but if want CF need to switch the mobo jumper..

This post has been edited by 8tvt: Aug 6 2008, 09:27 AM

bro.. how's the E7200 onload temp..
mine is surpassing 70C @1.5v urs is 1.7v..

what effect u want? what cpu? put +0.3 then u know..
change inside bios @ O.N.E tab..

u sure or not? why i got -ve option?

@BuLaNaR
read the manual or play inside O.N.E menu @ bios..

u -+ abit should ok rather than do it auto..
afterall got vdroop also..

i'm tweaking the ram.. lol if u leave it auto.. it's hard to get >1k
so noobs beware..

http://www.edgeofstability.com/articles/df...5/gtl/gtl1.html

ye? what u do? how come cpu-z not support?
1.4v? 2.1ghz.. 1.5gb ram DC.. pening edy..

look @ others setting la..

how about real temp? update edy?

ok - got edy... DOWNLOAD

---

Added on August 30, 2008, 4:59 pmmy readings

---

Added on August 30, 2008, 5:30 pmcrazy.. no different like previous version..



This post has been edited by 8tvt: Aug 30 2008, 05:30 PM

80 is good? i afraid that cpu kaboom jor..
maybe the temp reports still not fix.. it's not that hot when touch the heatsink..

i think 65nm cpu not suffered from that problem.. so should be accurate..

50? that's high.. maybe the heatsink not seated well.. or maybe too much thermal paste
but on realtemp 2.70 around 30-33 only..

becoz to get higher FSB n the fsb:ram ratio in 1:1 is better..

8 series can oc with less vcore.. 4ghz around 1.4v
my 7 series requires 1.5v..

actually 700fsb achievable with this board IINM.. so 666 is no problem..
now limit only with ddr2..

actually inside that menu got another option to disable..
but i forgot.. lazy to restart pc n check..

maybe u can list up n i can remember something..

yes c-state.. coz got that idle² n lower the voltage.. that's why fluctuate..

not sure got issue on CF or not..
but for sure we need to rearrange the jumper on the board to enable 2nd slot..

u mean u connect all the usb directly from mobo?
if connect to G15 usb port sure cannot coz use usb v1.0..

i have no such problem.. currently using usb port for G15, MX518, wireless adapter, external HDD, thumbdrive n card reader...

isit ur psu?