hmmm....no clue @ all wats the differents
i think E7200's easy to overclock to 4ghz or above with the rite settings
u use abit ip35e rite ..? this mobo performed very well too ^^ should be no problems



cheerz

just to ensure, usually there must be a different between this two spec.
some newer spec wont allowed high ocing...

here is some info on SLAPC.

General information
Type CPU / Microprocessor
Family Intel Core 2 Duo
Processor number ? E7200
Part number EU80571PH0613M
BX80571E7200
BXC80571E7200
Frequency (GHz) 2.533
Bus speed (MHz) ? 1066
Clock multiplier ? 9.5
Package type 775-land LGA
Socket type Socket 775 (LGA775)

Architecture / Microarchitecture / Other
CPUID 010676h
Core stepping M0
Manufacturing technology (micron) 0.045
Number of cores 2
L2 cache size (MB) ? 3
Features EM64T technology ?
Enhanced SpeedStep technology ?
Execute disable bit ?
Extended Halt state
Extended Stop Grant state
Thermal Monitor 2
Core voltage (V) ? 0.85 - 1.3625
Case temperature (°C) ? 74.1
Thermal Design Power (Watt) ? 65

Notes on sSpec SLAPC

* This part has Deeper Sleep state enabled.=============>>>>>>>>>>>>>


****wat does it mean?

are all e7200 overclockable or only some batch are good in overclocking?

overclockable to what extent? 400MHz? 500MHz?

1MHz increment is also overclocking meh!

4ghz around there lo

Well,go and read XS 7200 OC list,you can see which batch can do what clock

at least give a link la

yes. a very very very very very very mild one.

but nowadays, 1mhz very difficult to do la. you increase 1mhz on FSB also you get it multiplied by the multiplier already.

lol..
i think its can be done ...with pumping the vcore without touching the fsb..it'll be gain 1 or 2 mhz ...


will try tht later ...HAHAHA


cheerz

new E7200 reporting in.
but mine is SLAPC, M0 stepping

Mine is also SLAPC, but is retail pack (includes box, minisink/fan, book, sticker). Oc to 333 FSB and so far the temp is around 40++.

This post has been edited by Savor_Savvy: Aug 17 2008, 09:45 PM

i thought im the only one using SLAPC. hehehe
oc to 333FSB on what vcore?
SS?

I just adjust the FSB, others i all put auto.
How bout u? Urs is a small box also with fan, book, sticker and cpu, rite??

^^

try to pump more fsb ..all leave it auto ..but i recommend sets Over Clock Retry Count : 1
p.s: above 3.8ghz might need more tweaking ..good luck

I don't dare le....
Barely 3days old, and i scared will ruin the cpu..

yup! cut cost one...hehehehe.
just bought it today, can reach 4.0ghz.

u mean on stock vcore??
dats incredible...
now in dilemma to get either x3xxx or e7xxx...

no laaa.....sure stock clock cannot reach 4.0Ghz
running 4.0ghz only for 5 minit.

x brani lame2 wooo....
just wanna test it can reach or not.

hehe...u wont ruined ur proc .. 3.8ghz was ez for E7200


get E7xxx and its getting cheap and overclockable ....

^^ vcore needed to clock to 4.0ghz??


This post has been edited by match7274: Aug 18 2008, 04:27 AM

maybe 3.8ghz can stable with stock r??
but X3320 is really geng lor...
or can i request sumone to post up 3dMark or somthng??
want to compare the cpu score...
or at least super PI...
thanks..