The purpose I flash is wanted to see the line problem still there or not.
From CDA/95 to CDA/1 because I also don't know what's the reason.

Yes I did face this thing before.
Maybe softwares clash or something like that.
Smartphones do have their own problem there.

Seems like its getting worse the line problem.
Today I've already restarted my phone over 10 times from 12pm until now.

This post has been edited by Shufflerz: Jun 10 2008, 06:40 PM

Refer to my System Hack guide.
Its more to a spoon-feed guide.
Fx's guide is more for a advance user.

@fylon & shawnloong
You both are most welcome.

@shawnloong
Everyone was a noob, I was, and still am a noob.
You can see my noob question in the beginning of V2.
My ex-phone was M600i.
Maybe I just have a little bit more experience in handling a UIQ device.
No big deal.

This post has been edited by Shufflerz: Jun 11 2008, 12:57 AM

Here come another volume mod, this time SWmail claim that ...


Seriously, I feel like no changes(again!?) after I've done the patch. (I'm on R9K009/GW1)
Maybe you all can try it out, and voice it out here.
And here come another super spoon feed guide.

I've found out the reason.
Continue and read on.

Attention!
File 'C:\private\10202be9\persists\1020867a.cre' should be original.
If you've done sound mod lite, please revered it back to orignal.
Just replace back the orginal 1020867a.cre you've backed up during the mod.
00. Download se_uiq3_sound_mod_full.zip | Link 1
01. Copy mmmgmtserver.exe from Z:\sys\bin\ to C:\sys\bin\
02. Copy M3SAudioPolicyMgr.dll from Z:\sys\bin\ to your M2, then to your computer.
03. Run se_sound_patcher_full.exe, select the file M3SAudioPolicyMgr.dll you've copied to your computer from the phone, and press Install
04. Copy the newly patched M3SAudioPolicyMgr.dll back to your M2, then to C:\sys\bin\
05. Extract all the files the folder named AATFiles in AATFiles.zip(which included in se_uiq3_sound_mod_full.zip) to your M2(anywhere), then copy the whole folder to C:\private\10200b19\
06. Restart your phone
07. Done

Credit to mod's authors, Sergey (aka VSV) and SWmail (aka SW)

This post has been edited by Shufflerz: Jun 11 2008, 02:47 AM

Okay I've found out the solution, refer back to the post above.
The correction part is on Step #5.

Basically, the rear speaker increase 2 columns. (I think)
Which mean let's say originally your volume is on bar #3, it will sound like you're on bar #5 after you've done the mod.

@squall_kay
If not mistaken, the file btl_play.aat cannot be deleted in C:\private\10200b19\. (by using SMP. I'm not sure with X-Plore) (this is what I've faced)
And this is what I did.
Use to cut function, and paste it on anywhere of your M2, then use computer to delete it.

This post has been edited by Shufflerz: Jun 11 2008, 02:52 AM

My volume is on 1 petak below max, and so far so good.
There's still a little bit of distortion there when you're in a quiet room.
So if you're at outside, I don't think the distortion can be heard easily.
Unless your ringtone is too ... too ... violent? Like Linkin Park songs, or else this mod works great.

P/s: I'm using the good old original sexy Sony Ericsson ringtone.

Yes it does increase the volume in a correct way.

No by copying in the WALKMAN thingy into C:\ without seeing Private and Sys folder won't make the mod works.
Why you can't see those 2 folders yet?
You should have done System Hack before you proceed to WALKMAN 3.0.
The purpose to do System Hack is allow you view those folder which you normally cannot see.

Really glad to see you all helping each other.
I wish I was here.
Too busy with works just now.

Btw, congratz fylon on your hacking thingy.
Its better you do a Perma System Hack so that in future you don't have to repeat all those pyton thingy again if you wanted to get access to system folders.

And lastly, ORIGINAL THEME + ORIGINAL ICONS ROCKS !! ：lol:

This post has been edited by Shufflerz: Jun 11 2008, 03:43 PM

I don't care! Original still rocks!







Ignore me, work tension.

This post has been edited by Shufflerz: Jun 11 2008, 04:53 PM

Post #876

That's P990 interface, you can't change it my dear.

Yea don't worry, I'm a gay too.
Remember? I love pink color.

Oh ya someone finally mentioned iphone lock.
To me, its a GEM !!
1. Yes the phone itself does already has auto keylock, disable it if you want to use iphone lock.
2. Yes you have to set it there enable to lock it. Alternative way, tab power button, once, the iphone lock will activate. Then you have to slide it to unlock(which is way too cool), or ... tab power button another time.

This post has been edited by Shufflerz: Jun 12 2008, 12:58 AM

Power Button is your On/Off button la deh.

There's a .ini file in your memory card after you've installed the iphone lock.
From there you can change all those settings you want, including auto startup when reboot.

This post has been edited by Shufflerz: Jun 12 2008, 09:31 AM

Does this movie showing in Malaysia?
How come never notice it?

The .ini is in your M2:\Shared\iPhoneLock\

Yes I just found out my guide doesn't work.
I wonder how come it worked last time.

This is what I did.
Use WMP or iTune to put album art on that particular song 1st, then baru transfer into our phone.
The album art would show even without any picture files around.
PSP also like that, really weird.

@gogoman86
I think you've to check your phone again.
I just did a video call with my friend, and everything its working fine for me.
Normal hands free, Bluetooth's hands free, loud speaker everything is working well for me.

THIS IS WHAT I'M WAITING FOR !!!
Thanks a lot

I saw in Sony Center, Sunway Carnival(Butterworth, Penang) too.
RM80 for a pack of 3 batangs.
Expensive