bro habuk = glory hunter... jk.. jk...

c'mon, let him have some fun, i was there b4 too...



@ AMDAthlon:

i would say freezer extrme is d best... poison u abit... muahahaha....

notice that there is one side which d pipes are nearer to d end of fins, so that'll be d side facin d ram slots so that it won't block d slots. ac always been my choice for silent + performance cooler.

they are just bein wise in spendin their money...

imagine, d money spend for e21x0 + dfi dk is less than any x3 or x4 + dfi dk, but u get better performance w/ d blue camp. why not?

sumore u can clock d shite outta e21x0, can x3 or even x4 do that atm?

bro, forgive me for shallow minded, isn't it 8 pins supply more stable & "clean" voltage?

*off topic:
bro dblooi is poisonin ppl again, luckiliy i got a strong heart, else i wouldn't manage to resist d temptation...

brin us phenoms pls...

have u ever play w/ dfi b4?

there are 3 ways of adjustin d vcore, it's either play with one at a time (cpu id control or cpu id special control), or both at d same time.

it works for u but doesn't mean that it works for others, even usin same pieces of hardware (includin same batch for d chip) d result of oc sure varies. that's one thing u should know mate.

for example, my f3 is 0715rpmw, others here is later batch. their can easily do 3.3GHz while mine suffers to achieve d same clock. batch plays a big role most of d time in oc'bility.

an update from old stuffs of mine...

yup, cheapest (branded) cf mobo around, u gotta luv it for it's price. but runnin a 125w chip mite be a problem thou... it is meant for not so high end chip, ya 8650 will fit in just nice imo.

btw, d pwm temp is d b**** for d mobo, it runs veli hot til i gotta rip d silent pipe apart & slam mini chipset cooler on those mosfets & actively cool 'em usin a 6cm fan @ full blast...

for max performance, higher clock speed is better. but if u can strike a balance between clock + ram speed (not much diff in clock but huge diff in ram speed), then by all mean go for it.

yup, just look for it in abit forum will do, if u want, i can send it to u 2nite.

for ta770, no one is more familiar w/ it than bro digswell.

brisby has spoilt dts... i've lost count of how many times i've mentioned this...

@ fatalynx05,
u aint gonna run vdimm @ 2.3/2.4v for 24/7 do u? that's a 'lil high to my liking...

bro, even d port of pcie 2.0, but d card itself is still runnin on pcie 1.0 so d bandwidth will still be pcie 1.0. pls correct me if i'm wrong.

invalid spellin detected... Micron should be d correct word...

clearance sales huh bro? goin low end like me?

OT:

i'm sellin too... can cod @ city square on week end...

This post has been edited by ah_khoo: Jun 4 2008, 05:00 PM

never trsut stock coolin from d manufacturer.

even y board is paired w/ silent heat pipe, i took 'em off & slap a chipset cooler & actively cool d nb. for mosfet, i put mini chipset cooler (cm) & place a 60mm fan @ 3k+ rpm to blow on 'em. from my experience w/ ax78 & ut 790fx, these chipsets are freakin hot, especially d pwmic temp...

guys, stop d kopitiamish style of talk here pls... later taiko -pWs- scold us kaw kaw...

even d nb? i thought it should be d sb?

nope, no such thing happen on me... yet... (touch wood)

This post has been edited by ah_khoo: Jun 5 2008, 08:04 AM

evelibody beware... bro -pWs- is not in gud mood since his intel quaady is in rma...

@ bro -pWs-
jokin bro... hope u'll get ya chip back asap...


bro, did u flashed ya bios lately? if so try to removed d battery & put it back again. it's d best way to clear cmos imo. d ez switch is for lazy ppl...

but however, i did face cold boot issue once i run my chip @ 3.2GHz w/ 1.4v, guess d chip need time to get used to d new clock. no problem if i run 3.0GHz w/ 1.27v all d while.

no, i'm quite happy to run it @ 3.2GHz ledi, dun think it's worthy to run it any higher as d voltage needed is veli high... some more w/ pwm temp shootin near 60'c @ 1.4v i dun feel comfortable to go any higher...

is yas prime stable @ 3.3GHz bro?

clear cmos, it could be d system can't take d overclocked speed.

list out ya oc details then we can start from there...

i think what he mean is how to push d ram further, it's useless to increase d htt iff ya ram can't take d speed u force it to run. usually can be resolved by addin juice or loosen timin.

put v nb 1.1v = 1.2v. try that, it mite work.

This post has been edited by ah_khoo: Jun 5 2008, 06:45 PM

try to boot w/ one stick 1st. then save optimized settings & check how things go...

have you make sure it's not d ram which is causin d problem? got any other pair of ram in hand?

trial & error is d only way mate... there's no guarantee in oc as diff kinda combinations give diff kinda oc result...

yas is of locked multi (onwards), so wat u can do is to increase d htt bit by bit until u hit d wall.