thanks bros... i'm just one of those "overage" lurkers in this thread...

until now still haven't got d b2 quaddy, think i'll give up if i can't get it 2day, kena ffk dunno how many times ledi...

initial testin of my b.day gift, nothin to shout about but still ok considerin on stock vcore...



Phenom X4 9600 @ 2505MHz | ah_khoo | Abit AX78 | TwisMOS DDR2 800 | 910MHz | 5-5-5-18-24 | PC Cooler HP-1204

This post has been edited by ah_khoo: Jun 21 2008, 10:50 PM

thanks bro...

i got it coz i can't afford those performance ram mah...

utt bh-5? yeah... they were awesome back then, 275MHz @ 2-2-2-5 w/ rather low voltage (3.2~3.3v) was superb...

they're on twinmos chippies, which i believe is nanya... not a gud clocker, but i reckon 1000MHz @ 5-5-5-x w/ rather low voltage is possible... still tamin d chip now, will test how well d ram can fare after i hit d wall (for d chip) which i think is near (b2 are lousy in overclock as everyone knew)...

dun think so bro, this ain't b3...

This post has been edited by ah_khoo: Jun 22 2008, 09:32 AM

i'm not so optimistic these days... would be veli happy if 2.6GHz is attainable w/ stock voltage...

know nuts bout quaddy oc, still got lotsa things to learn...

new Abit AX78 bios:

05/23/2008

runnin it now, so far so gud...

yup, refer to 1st page for d link...

any oc done on ya phenom 9500 mate?


one Q to ask biostar ta770 users:

did d bios allow nb multiplier adjust? too bad ax78 no such option...

nope, aod doesn't have any option for nb multi adjust...

what's d vcore for ya stable clock?

my pwm temp is really worryin, near 70'c on load...

edited:

just realize that stressin quaddy is diff... gotta run 4 orthos at d same time for 100% usage @ each core...

new update on d clock, gotta sacrifice some mem. performance for stability's sake...



This post has been edited by ah_khoo: Jun 22 2008, 08:08 PM

kinda scary as i'm really not comfortable w/ pwm > 60'C. couldn't imagine if i still use d heatpipe cooler, alot worse i think...

nope bro, i ran 2 copies but cpu usage of 4 cores never reach 100%. that's why i gotta run 4 simultaneously. my screen full of orthoses til i dun have enuf space for other programs...

u must be very familiar w/ intel quaddies then?

wow... very low vcore there... i'm sure there's still room for higher oc. d thing w/ b2 (wat i've noticed) is they dun really respond well to higher vcore...

i've ledi put a 6cm fan (taken from p4 stock heatsink) on top of those mosfet, @ full blast manage to brin d temp down to 65'C. i'm allergic to noise especially those from screamer fan like delta...

not so extreme to d extent that i need to brin eveything out, i'm more into 24/7 stable oc... those extreme i'll leave it to d pros like bro xixo, -pWs-, dblooi and others...

but p95 doesn't display duration of stress bro, rite?

it's more on software settin bro, i'm sure d board itself can support dual display...

This post has been edited by ah_khoo: Jun 23 2008, 09:14 AM

u need to show d completion of sp, not d result page only as it's transferable.

btw, i think d namin of ya mobo is wrong...

vcore ~1.6v, vdimm 2.5v if my memory serve me well... tempted to get one ke bro?

This post has been edited by ah_khoo: Jun 23 2008, 05:22 PM

gilerz...



OT:

any guy here usin vista 32-bit w/ 4GB of ram? my os only detect 3.0GB while 4GB was installed...

i've tried enable the pae thingy but still d same... anyone can enlighten me on this? thanks...

what do u mean by can't login properly? totally halt @ post or u've been prompted to choose start windows in bla bla bla... mode?

totally halted @ post w/ windows corrupted mesage = timin too tight

prompted to choose yada yada... = improper shutdown = unstable oc (ram/cpu)

not 100% correct but d posibilities are there...

no mate, have been busy w/ vista these few days. my c drive too small for d big fat os & i can't find any free partitionin s/w for vista. end up reinstall xp, use "free" partition magic just to resize my c drive then reinstall vista again... d migration from xp to vista was really pain in d a$$...

i think mine will max out @ 2.5x prime stable... tried several time @ 2.6GHz alwez give me BSOD... not much complaint as i got it @ knock down price...

how bout yas? 2.53GHz @ 1.20v is a gud sign... saw a guy in xs doin 2.9xGHz w/ his 9600... but w/ ln2 iirc @ rather low voltage (1.3xv)...

This post has been edited by ah_khoo: Jun 25 2008, 05:55 PM

heard some rumours few months back syain that there's a defective core in all b2... guess it wasn't totally bs...

i'm havin hardtime pushin it @ 2.6GHz prime stable, think i gotta settle for 2.5xGHz for 24/7 usage.

thx for d vista tips mate...

drivers for 64-bits os still not so mature imo.

bro, is 2gb enuf for gamin in vista? thinkin of downgradin to 2gb again...

bro, there's no point for me to test d max for each core as i'll be runnin d chip w/ 4 cores enabled 24/7. if i want it ya way, i should have bought bro habuk's b3, save me lotsa time & efforts...

me orang tue = less patience...

mine aint a be mate, plain 9600 only...

will try my best to break d 2.6GHz barrier but my patience is runnin out ledi, that explain why i'm havin bad mood lately (after i get d chip)...

well, i'm downgradin to 2GB 2ml, a pair of hyper x ddr2 800... hopefully it can fare better than d twinmos... i'm kinda regret sellin my 10th anni ledi...

d problem w/ vista is it has too many bloatware... i never see os as fatty as this...

dx 10 is d only reason why i migrate to it.

from wat i understand is unnecessary programs/processes. just got my hyper x, will test whether it's enough for lite gamin... i got only one dx10 w me now but it's an online game. d thing is, i never play any online game...

archiles or vendetta 2 (both mite spell wrongly ) will do... like d archiles more as it's more pleasent to d eyes...

had some fun w/ my twinmos... impressive is all i wanna say...