B2 phenom us not so good though..
try changing tu agena..

Guys i need help here.After getting new ST56F PSU i still getting BSOD@3.3Ghz no matter how i do.Can someone help me?

give full setting and detal of ur OC to 3.3ghz....

OK i think i know whats the prob.I think its my VDroop?Becos Now my settings@BIOS

300HTTX10,5-5-5-15-21 2T DDR 2 400 1.50VCore.

@Windows VCore dropped to 1.46V.So when i set to 1.57V-0.04V =1.53VCore=Not stable lor for 3.3 right?So how do i make it stay at 1.57?

My 3.3Ghz settings@BIOS

330HTTX10,5-5-5-15-21 2T DDR2 400,1.57VCore.

should be urs da s#ck kvr ram.......
try pump some more vdimm



This post has been edited by digswell: May 10 2008, 10:34 PM

Same d increase vdimm to 2.0 still BSOD..= =

When did u get the BSOD ?
when boot to windows ?

try 2.1v or 2.2v with loose timing

Loose timing=5-5-5-15-21 right?Will try.BSOD on windows while browsing or whatsoever.

This post has been edited by AMDAthlon: May 10 2008, 10:37 PM

5-5-5-18-24 ... divider 400 with vdimm 2.1 or 2.2

bro digswell,still i am getting BSOD after doing:

HTT 330X10,VCOre 1.57,VDIMM 2.20.Divider 400, 5-5-5-18-24 2T.Whatelse more?= =

hit wall ...or maybe hv to use WC ....

..My proc hit wall...zz or is it need change to DDR2 800 RAM?= =

i think u've already hit the wall lar...or test it with a performance ram, it might change sumthing..

Haiz...I wonder who can lend me his ram = =.But nvm kumpul $$ first.Sienz i thought the ST56F could make it stable.. T_T
Or perhaps its time for me to get X3 8450

This post has been edited by AMDAthlon: May 11 2008, 12:05 AM

haiz..u were late, i've just COD with a forumer just now..if not maybe can lend u that ballistix..

= = Even u just COD,no use also d cos me cannot go to your place.Maklumlah 13 years old

i think its ur ram bro..
coz i can boot at 3.3..

ahaks..nevermind la..no more ram edi..dude, try lower down u clock..
see if it still BSOD..but i sense a wall edi..mine hit at 3.2GHz..

3.2 ? then cannot oc higher edi ?