becoz the bios is not good.. so far TA690G is the best for me..

nope, can't boot into windows means that excessive oc is done. i can boot my quaddy @ 2703MHz but after post (showin those irq thingy) then just blank (monitor is on but nothing displayed).

Means it cannot be pushed anymore?
Or is it limited by somethingelse?Maybe the temp or VCore?

temp?? vcore?? for sure it's related to each other.. maybe u try each factor:
either lowering ur HTT (same volt)
lowering ur vcore(HTT same)

if still fail after few restart.. shud clear Cmos..

This post has been edited by xixo_12: Jul 11 2008, 12:12 PM

i've oc my 5000 blackie to mere 3.0 but my prob is it gets too hot when on load,i try run-in prime95 then it starts beeping and when i looked at abit EQ it says my temp like 90c W00t!!!i have put a additional fan on my CM sphere...wat should i do??my vcore are upped to 1.381v

Try touch your HSF.Is it very hot?If Warm means its DTS problems.
xixo
I dont really get you.Why must lower HTT o?
You want it to clear CMOS?I want to know what has caused it.Is it its already maxed/hit wall edy or maybe not enough VCore or maybe temp is high.

Hey guys. Check this out. http://forum.lowyat.net/topic/740235

Im selling my F3 system for sale. Retiring from oc and desktop life loh. Pm me if anyone interested.

"Retiring from oc and desktop life loh"

Deneb

http://www.techpowerup.com/65465/Pre-relea...AMD_Denreb.html

-pWs-

OMG u PWS off topic
Jk

Btw still no one know my probs?
The results not really satisfactory.Maybe it causes lack of some features.We will see in the future.Bloomfield is tested using DDR3 right?
I hope there's much improvement on it.
I would eager to know real-time performance instead of benchmarking.

oc is trial n error, in my experience, when u found u can boot but after that u face the blank screen, it mean ur proc alredi too hot to handle.. so try first to lowering down ur HTT n boot back.. if u find u cant boot at all.. u must lowering ur HTT same with ur vcore.. sometimes, u cant boot at all.. so its times to reset ur cmos n restart all effort from beginning..
it's maybe about the vcore n it's effect the temp..

---

Added on July 12, 2008, 11:15 amgood improvement, sub 20s..

This post has been edited by xixo_12: Jul 12 2008, 11:15 AM

By the way,Now stable 260 X 12 only.So i guess i have to wait for S 1283 lor.
Lucky it reaches my target.
My sig 2.4Ghz > 3.1Ghz Cooled by AMD HSF.
1.25VCore..So you think i can push much more further if i can get better cooling right?

Yea... Got improvement. But 3.4GHz need 1.6v

-pWs-

But thats Quad Core..Hows the Q6600?Not so much improvement right?Plus thats 2.2Ghz stock clock.Maybe there is BE version?Who knows?
Btw how far Intel 45nm can go?
By the way i wonder how the AMD Phenom FX performance..

This post has been edited by AMDAthlon: Jul 12 2008, 11:50 AM

i think the proc can dance with s1283

need other stepping.. amd didnt love their oc's fan

I can oc my Q9300 to 3.4GHz at 1.232v

@xixo_12
Yea...AMD do need to consider us.

-pWs-

Hmm..
Maybe thats initial release?not very satisfactory.But we'll just wait
What u mean by dance?

I TOUCHED THE HSF BUT ITS JUST WARM...IF DTS PROB,THEN WAT SHOULD I DO TO RESOLVE THIS?

nvm la...nothing will happen,btw,pls dont use caps lock

If Warm means DTS problems.You cant do anything.