it is enticing, and tempting

is it yours?tried OC further?

So So tempting  and so so piosoning 
Vcore so low .. wat is temp for idle and load ??

wah stable at 3300MHz..bro bleh pergi lebih jauh ke??

No, not mine. I'm on a lowly X2 that can't even get over 250HTT.
This is on Asus's Crosshair 2 Formula mobo, nForce 780a. The nForces seem better than the 790FX now, for OC that is.

http://www.xtremesystems.org/forums/showthread.php?t=185909
DFI's M2RS 4 (+1?) phase power might be the cause of the Phenom 8750 not reaching 3Ghz steady though.
Now that the 9850's only RM7XX, I'm not too sure about the 8750 again. 9850 means OCing high with cheap RAM, something that gets forgotten when you step into keywords like E8400 and 4Ghz. 

[System detail]

cpu voltage : 1.432v
ram voltage : 2.1v
HTT & SB voltage : Auto

ram divide : 1066
timing : 5-5-5-15-2T unganged mode
else timing : Auto

cpu ratio : x16.5
fsb : 201Mhz
CPU-NB width : up 16 , down 16
HTT : Auto (x10) 2000Mhz
Processor Downcore : Disable

CPU : Phenom 9850 BE (code : 0810APMW)
Mobo : Asus CROSSHAIR2 FORMULA
ram : Crucial PC8500 Ballistix Tracer 1GB
vga : ASUS 9800GX2 Stock Clock & Cooling
HDD : Hitachi 250GB SATA2
Power : OCZ PowerStream 520W SLI
Cooling Device : Exos 2.5 + D-TEK & 80mm FAN x2 & 60mm FAN

there no different in higher FSB or lower....
we use different setting to find a sweet spot for our OC...
each hardware got a different setting..also depend on their OC ability..

Thanks for the advice bro.
No time to really tweak the rams yet...
Will definitely do some tweaking to it and post up new results...

I've used 2 DFIs.
The 1st was a NF4 LP Ultra-D.
That board was a pain in the arse the first 2 months i got it.
However, after some tweaking, a lot of reading from forums, it works like a charm and i started falling in love with it.

My 2nd DFI is Ah_Khoo's ex DFI.
I can say, so far this is the easiest plug and play board i've used.
Plugged in everything, booted 3.2Ghz on 1st boot.
Very minor ram tweaking. If i have HPR i think no tweaking needed at all.
The board had been superbly stable as of today, i've never crashed even once running on 3.2Ghz...

So basically, it differs from Models. The LP 590 SLI seems to be a problematic one i heard. There were quite many issues with it.

Btw, if you want a nice proc, check out garage, Xixo's ex F3 is now on sale.
Better grab it fast, that should outperform any average BEs when it comes to OC.

OMG..~.~Off topic so good..Haiz my proc hit wall edy.Max 3.3 thats also not stable ..

DOn't scare me LOL...   . I just want to know is it because of my chapalang PSU or not? If is, going to change to true power 500W.

I would say yes becos its cheaper and with total 36 Ampere on 12V Rating.Support SLi/CF Summore with over 80% Power Efficiency almost like branded PSU has.Just the brand abit new,standard la
Dont off AMD Virtualization.Its good for applications and gaming.

@Xixo
What cooling anymore?Btw guys HDT S925,CM Hyper 212 and AC Feezer 64 pro WHICH ONE PROVIDES THE BEST COOLING Performance?Btw i will format my Vista to XP first for OC testing purpose and see whether there is any BSOD.But i think i wont do it too,now i wonder which 1 cooling is the best among 3.

Haiz mr habuk..u betrayer say downgrading go Intel edy huh 
Fine 

spoilted DTS mean incorrect software temp?

yeah, i did that because i wanted to get the best pi efficiency

pi efficiency= clockspeed x super pi 1M result ( lower the better)

anyone wanna try to beat my result? 2179.9 x 36.156= 78816 

bench it long time ago in a mini online based oc competition 

about +-10% if i'm not mistaken..
correct me if i'm wrong..

+-0.01 depends on mobo..