increase the CPU/FSB Frequency ratio to X 16 and lower the FSB Bus Frequency to 200MhZ. You will get 3.2GhZ. Your Vcore already enough.

This post has been edited by Shah_15: Jun 1 2008, 02:51 PM

wah the bios.. interesting and pening..

Yup. Very confusing but Melfice, try what I suggest above. I think you will be able to archieve 3.2 in no time.

wow thank .. goin to try it now

haha ya ... that why i had very tough time understanding it ... bought BE almost a month nvr OC it ...

Dude..u sure or not..U don't even use the bios before..risky anyway..Anyway wats the ltd for o_O...it's on 5..CNQ? 200mhz is default for BE

This post has been edited by Lacus: Jun 1 2008, 02:55 PM

No problem. Let me know what happen after u try the config I give.

I hate to see this kind of bios option...usually is nforce chipset make the bios like that.
For me should be no problem but for beginner ..hahah blur blur edy

From what I read, the Bios function still same. Just the name they changed it to make more confuse.

have u ever play w/ dfi b4?

there are 3 ways of adjustin d vcore, it's either play with one at a time (cpu id control or cpu id special control), or both at d same time.

the Vcore already fine. 1.4V can run 3.2GhZ pretty stable.

---

Added on June 1, 2008, 2:58 pmBTW, Melfice, try at your own risk. I just suggest you from my knowledge.

This post has been edited by Shah_15: Jun 1 2008, 02:58 PM

hey Dram voltage 2.78V ....what ram is da ?? DDR 1 ??

-edited-

This post has been edited by Shah_15: Jun 1 2008, 03:01 PM

sorry to say that screenshot is not same as my Genie Bios ... ==" got many version oo .. wait i find new screenshot

ekk that jz a example ...

from his siggy he using ballistix tracer..

edited : i thought that is ur bios..

This post has been edited by sarahlah: Jun 1 2008, 03:03 PM

Why do you take pic of your bios and post here? Maybe we can help you more with real info.

there you go !! ... wont be any mistake coz i find using " Genie Bios 790FX " keyword ..

Your Vcore already fine. Just increase the CPU Clock Ration to 16x. Try at your own risk. BTW, its not your BIOS. We need your real BIOS to help you.

This post has been edited by Shah_15: Jun 1 2008, 03:08 PM

haha , itz not my bios .. sorry


errr , already did that jz now .. but turn out got BSOD on my booting screen to my windows ...

you need to increase your Vcore to 1.4v.

>HT Link Control:

HT Link Width......................... - 16 bit
HT Frequency.......................... - 800 MHz
IH Flow Control Mode.................. - Disabled
HT Link Tristate...................... - Disabled
2x LCLK Mode.......................... - Disabled
Unit Id Clumping...................... - Disabled
>CPU Feature:

NPT Fid Control....................... - x10
Virtualization........................ - Enabled
AMD K8 Cool&Quiet Control............. - Disabled

>DRAM Configuration:

MCT Memory Timing.................... - Manual
Maximum Latency...................... - 8ns
2T Mode.............................. - Auto
Cas Latency Time..................... - 5
Pre Charge Delay (tRAS).............. - 12
DRAM RAS# Precharge.................. - 5
DRAN RAS# to CAS# Delay.............. - 5
Bank to Bank Cmd (TRRD).............. - Auto
DRAM RAS# to CAS# Delay.............. - Auto
TRTP................................. - Auto
Write Recovery (TWR)................. - Auto
Write-Read Command (TWTR)............ - Auto
TRFC0................................ - Auto
TRFC1................................ - Auto
TRFC2................................ - Auto
TRFC3................................ - Auto
Trdrd................................ - Auto
TrwtT0............................... - Auto
Twrrd................................ - Auto
Twrwr................................ - Auto
CS/ODT Pin Fine Delay................ - Enabled
Bank Swizzle Mode.................... - Enabled
Auto Tweak Performance............... - Enabled
Optimal Performance Mode............. - Enabled

>PWM Settings:

PWM Control.......................... - Enabled
CPU VID Control...................... - 1.40625v
CPU Vid Special Add.................. - Auto
CPU NB Vlotage Control............... - Auto
CPU NB Vid Special Add............... - Auto
DRAM Voltage Control................. - 2.12v
SB PLL 1.2V Voltage.................. - 1.20v
NB Core Voltage...................... - 1.20v
NB PCI-E Voltage..................... - 1.250v
NB HT Voltage........................ - 1.20v

Genie BIOS Settings:

Spread Spectrum................ - Disabled
CPU Host/HTT Clock................... - 340MHZ
CPU Host/HTT Boot Up Clock.............. - 280MHZ
CPU Host/HTT Adjust Gap..................... - 5
PCI-E Clock.................... - 100MHZ
[/code]

Example wad inside the Bios !

i think i nid to bring my laptop upstairs ... ==" using 1 computer is pain in da ass ...

This post has been edited by Melfice: Jun 1 2008, 03:19 PM