problem solved, is not the engine oil leaking, i mistook the leaking liquid as engine oil, it is gear oil leaking. The culprit is the loosen nut and got it fixed today. I so panic for my engine you know. 

that 1 is refer to LPG not NGV 2 gas is driff o.

Tomorrow I go change tyre lu.. Change into Yokohama Parada Spec 2. My rear tyre botak and cracking edi.

Listen to me.. If you wanna do block heat, just go get a expensive and good tint film.. You will feel the different.. I tinted my car with safe tint which block heat as well.. Although I parked under a hot sun for 5 hours (from afternoon till I finish college at evening), my cabin still average.. Go in car you wont feel like micro wave oven and you don't feel hot.

New crew report in....sir!where to register?how to register?too many pages to read...

welcome ya.. All member here all is kind and friendly.. Make sure you know domo_kun ya.. Our legend.   

I wan yokohama advan neova geh, but then kanasai la.. It under semi slick category which very poor in wet.

catacombs, you wrong la.. You come to KL and see the wheather... Evening, the sun still so so hot!! haha

oi.. anybody interested to try this?
http://forum.lowyat.net/topic/712191

Mini turbo with full money back guarantee...     

by the way, anyone remember the part number for the OEM cold air intake for iswara uk spec?

wat mod is tat?? 

well.. turbo is just a system right? u show me any part in an evo also i cant tell u which part is turbo.

My new update...  Yokohama Parada Spec 2..

Feedback about this info, The grip is farking awesome no matter in wet or dry. But when dry, seriously it damn grip that wet road. tested today along genesis road. This tyre kinda funny that cannot change to left right. Left it left, right it right because of the thread patern. (I think is under semi slick categories)


Another update, Ultra Racing rear strut. Actually wanna install lower arm bar but need to order. Then rear strut bar got stock. So installed it at autogen just now. The feedback for this bar is awesome for box car like saga/iswara. You can feel the different when driving on uneven road, bumper. But when pek corner, you can feel more obvious of the improvement. Howie help me install this bar and the workmanship is nice. Not cut all the plastic cover and only cut a small cover and can keep it nicely.


Next sunday update, GAB HA series or GAB semi adjustables.  This is what i waiting for..     

i oso just pumped RM101.60 yesterday..

hurt le..

Yes.. parada spec 2 noise level kinda high. But compare with my dunlop D01 and roadstone Radial 9000, the parada spec 2 noise is lower... RM160 for the rear strut bar.

I'm mentioning my absorber spoiled? Just to let you know, it haven't spoile.. But I wanna upgrade it.

who says Parade Spec II has hard side wall? It's very soft.

DIY install? cannot la.. My bar need remove fuel tank to screw the middle part. 

Titan How much?? calculate my budjet

I suka low profile la.. Cakap stop modding, tapi still carry on. I still got done so many thing on my car but I haven't said it out only. 

Not kena fuel tank. Is the fuel tank block the hand going inside. Some more iswara/saga lower chasis not same welding.

plz add me on da list...saga 1.3 orange color..the 27k one..

Dun tell me, u use bigger screw and add that damn thing in place ler.. Haha.. Lousy installer.. 

how do u do dat?..

hi guys.. can u guys recommend the best iswara bodykit.. if possible to post some pic =)
mine iswara 1998

oil filter 10.5  >>  above average
engine oil treatment 19.00,  >>  waste money
spark plug 24.5,  >>  expensive nyaa... better buy my sidegapped plugs...
air filter 23.7,  >>  expensive
coolant 4.2,  >>  average
gastket 2.1  >>  what gasket??
gear oil 30  >>  average
shell super 58.5  >>  average
gear oil treatment 19  >>  need meh??
injector cleaner 19  >>  waste money
labor charge 66  >>  waste money
total rm 283.5.

o-0.. exp nt? any recommand proton service center around cheras?

me refuel rm 119 last few day.. onli go around rm425km... T_T

some more pay road tax on mid of march.. cannot claim for de rm600+ from gov T_T

today, my freind introduced me  to put some sort of i-charge...to save a petrol...do u all know bout this thing...tomorrow i'll try this this..i'll take a photo of this thing call i-charge.the function is to connect to the cigaratte lighter plug and the thing do all the rest like..stabillized the voltage, save a petrol and etc..

i wonder i spotted who in ss2 SIC member jus now ar 9pm++

cannot b cuz it grey colour~

---

Added on June 17, 2008, 2:41 amguys, my hsmate car, toyota LE , the rocker arm leak engine oil..what can be the possible caused?

who is going to bukit tabur this saturday? i think someone here is going right. i m going also 
don't have car for this week....need to take public transport here and there...my car is in workshop changing piston

@sifoo sky
back in malacca?

bro nice skirting! how much cost u for the bodykit and the painting ?

i use 35psi with my conti tyre

bingo!!!..i think this is the thing...but toyota LE worr..shud be same method rite..?

got yumcha let me know.. rot at home.. haha.. will be here till early july

p.s...kah chai, u bukan sudah grad kah.apa buat at mlk lagi

i will install NGV soon oooo

Guys,

Decided to replace my air filter and just gotten a drop in air filter (K&N filter) just the other day.

Sound not much difference from stock filter.

Performance can't feel that much difference. Pick up just a slight improvement. Got it for RM240. So price consider ok la 

Hopefully my petrol consumption will improve with this drop in filter. CAnnot tahan coz now petrol price so damn high 

Wkho555, I bought K&N air filter already.. It so darn cheap. RM200 only.. You wan or not? I bought it from my classmate father. I'm not sure he will give me the same price if I get many or not.

Now I damn busy.. That day you called me I no answer cause that time I was doing overhaul a saga lmst engine.. If I used phone, instructor will t*u me.. haha.

cannot la.. Later instructor failed me, I cannot to play BMW 318i already.. haha. Now i very familiar with 4g13 and 4g15 already.. Haha. I can installed highcam by myself now. 

actually I already installed high cam few weeks back.   

Yes.. Pipercam brand.    Price, cheaper that market I get. 

Of course cheaper la....wad u get also cheap,wan u to buy for us,lain harga.   

I bought new pipercam baru Rm550. 
My classmate father open performance shop at Sunway geh.. Some more everyday lansi me.. Always said he got a workshop waiting for him.. If his father workshop pass, we maybe going to that shop for on job training.

wah.. rm550 is cheap.. if plus tuning, installation and adj cam pulley, the whole highcam project is still less than rm1k rite? hahaha.. sounds tempting to me.. hahaha.. racun racun!

if jadi, then we can form a pipercam gang.. haha

highcam surely improve hp. but u need retard cam degree to improve low end power.
if i not mistaken, the improvement would be greater around mid to high rpm.

any review on hydrogen power engine?

RM550 new de pipercams, adj cam pulley Rm190, install and tuning by my own.  Tuning me and my friends tuned together.
My 1 baru de.. Hehe.. =P But my friend told me, put highcam already then is time to change clutch.. Then only can maximize the powarrrrrzzz..

port and polish ar? 

hydro - means add water, no need to use petrol

in the market
but havent heard any review yet 

kantoi 1.5cc monster. 

hi-cam syokk wooo

for a daily driven car, i would advise against it. Trust me. I've experienced this setup for almost a year. Changed it back to stock as soon as I got the money. 

No need go powerzone la.. Haha... Sendiri bikin saja..