heh heh sure can work what

tonite i really feel like don't want to study, so i assembled my hardwares into the lianli..

and this is how it looks




any comment guys, about the cable management

hmm // not bad !!

cool bling bling factor ...

probably could hide the exhaust fan cable and sleeve the connectors (power, reset and etc).

could work on the routing of sata cable a bit more as well ..

@suicideroach

nice setup bro, really suit the color. Way better then mine, thumbs up

hello all... a bit of shameless self promotion here.

My Lian Li V1000B (black) for auction.

it's with great sadness that i have to let it go, but it might as well be to an aficionado.



This post has been edited by drxl_lahkini: Apr 20 2008, 01:00 PM

huhuhu... seems the airflow in my casing is quite bad. My idle temp increased from 28'C (in previous case) to 36'C in this casing

ermm i did the reverse airflow so that the air inflow at the front panel and out at the rear casing.. is that a bad idea?

and one more, i notice that the exhaust fan is not strong enough to pull the hot air from the HSF.

you might consider changing to a more powerfull exhaust fan,

how the air flow of the PSU?

any air flow thru the mobo chipset?

The PSU, i put the fan side downwards. Is it ok?

i wonder.. ur front intake or exhaust?

The front is intake

but ur psu is under ur hdd which is at front.. (intake)
ur front intake fan blowing ur hot psu air into the casing.. no wonder the temp would go up..

so it is a bad idea for me to reverse the airflow, rite? aiyaarrghh... need to open up and cabut all the stuff again

my advice would be keep the original fan configuration but replaced it with stronger fan ...and remove all the fan grill ..

[Front exhaust and rear intake]

the reason you aren't getting adequate airflow is because of the fan grill that blocked 50% and more of the airflow intake...

As for the graphic card area try to remove the PCI-Slot covers and see it brings positive result to ur gc or not ..

Try that and see got different or not .. .

but aint his hot air would be suck back in at the pci slot?

Took some time to "molest" the Armorsuit today at ATE. Got to say its quite nice

Just love the removable front filter. Easy to remove and clean. Bad point, ugly top panel and the top 14cm fan.

m2n-e

Don't worry because the 3870 cooler wouldn't pushed the hot air out strongly ..

so it won't sucks back from the PCI slot opening ..

ok.. i just re-adjust the fans and the hsf, so that the airflow will be like the original setup, intake from rear case and exhaust at the front.
So far the temp is acceptable for me lower than the last setup.

Next step, find some aeroslots and stronger fans.. Thanks guys! Really appreciate ur help

@suicideroach
Congratulation dude

Just add aero slot and better fan it would be just nice ...

LOL...1 pack of Aeroslot is not even enough for my A10. Guess i need to get another pack later on. Still missing 1 or 2 pieces.

Anyone know whether ATE have stock for those front bezel with filter or not? I saw it from their brochure and the last time i asked, they said they are not bringing it in. Same goes to their LL aeroslots as well...

My Lian Li PC-A17 Silver..


Attached thumbnail(s)

nice and neat setup i said........... hehe good combination of coolers too, accelero and HR-03GT.......