D.I.Y aka Do It Yourself sound proofing / heat insulate. Just stick the Foam to your
cars.These are the material from Synthetic Foam to use on the front car bonet.

SUITABLE for all cars.

Worth your money to buy this HIGH QUALITY product.
Why risk to buy a low quality just to save a few ringgit that has no effect?
Just use a 10mm or 6mm of this HIGH QUALITY
product to get the same result with a minimum space in tight and small area..


1) Reduces external noise, vibration & harshness (NVH).

2) Enjoy improved clarity, loudness & bass response from your car stereo.

3) Reduces engine, transmission, exhaust & raindrop ringing noise intrusions.

4) Protects paintwork from engine heat damage & battery acid fume damage.

5) High performance/luxury car insulation and look when applied on the bonnet.

6) Dampens buzzing vehicle parts & eliminates “tin can” body panel ringing.

7) Weather durable and has excellent ozone & ultra-violet resistance.

8) Resistant to mildew & all automotive chemicals/fluids including battery acid.

9) Ozone friendly, hypoallergenic, waterproof & washable.

10)Flexibility & adhesive coating makes installation fast and easy.

11)Ability to withstand temperature ranges between -40°C to 105°C and
has a self-extinguishing fire rating.


.
Thickness & Price

[1. 6mm(1/4inch)= RM25 W/out Adhasive

2. 10mm(3/8inch)=RM35 W/out Adhasive

3. 6mm( 1/4inch)=RM45 SELF Adhasive - now rm40 while stock last

4. 10mm (3/8inch) = RM55 SELF Adhasive - now rm50 while stock last

5. 1/2 rolls 4"ft x 15"ft (6mm) w/out adhasive = RM99 for 1/2 rolls untill end of this month!Grab it fast

6.1/ 2 rolls 4'ft x 15'ft (10mm) w/out adhasive =RM150 for 1/2 rolls untill end of this month!Grab it fast



Dimension

4"ft x 3"ft ( Fit almost front engine bonet)

1 pieces fitted for 2doors


Pls PMed for INQUIRY :-

1 roll 4"ft x 30"ft (6mm) w/out self adhasive = poa

1 roll 4'ft x 30'ft (10mm) w/out self adhasive =poa

1 roll 4'ft x 30'ft (6mm) adhasive = poa

1 roll 4'ft x 30'ft 10mm (3/8inch) adhasive = poa


Recommended to use on :
1. Doors(Dootrims/Door Panel)
2. Front bonnet
3. Rear trunk lid
4. Boot floor and walls
5. Floor pan
6. Front fender / wheel arch
7. Roof Liner
8. Engine firewall from engine(best result)



Quick Info's ~ NO installation PROVIDED!

List of COD location :-


1.Petronas Tesco Ampang
2.Giant Melawati
3.Petronas Melati
4.Shell next to Carrefour W/maju
5.Setiawangsa Lrt Station

Note :
*Minimum Order For Postage is 3 Sheet(9ft)
*Postage cost is paid by buyer
*Postage is through Pos Malaysia E-Parcel,will be delivered within 1 week
after payment is confirmed
*Dunlop GP Adhesive/Dunlop CA Adhesive can be used as adheshive as it just rm10-20 per can..combine all cost,it's a cheap DIY..

Contact method:
1) PM here
2) E-mail: wcg6548@gmail.com
3) Whatsapp,SMS,WeChat to 0133695674 please state your NICKNAME. (FAST DEAL)

This post has been edited by wcg6548: Dec 26 2013, 12:16 AM


Attached thumbnail(s)


Attached image(s)

Is it superlon or sound proof mat???? Pic??

pm me too i want the pic

PM me too^^ TQ

pm me too. Thanks

pm me too ok?

Hi andychee81,

As requested , herewith attached the picture for viewing.Every 3"ft x 4ft" ( 10mm) is enough to stick ur front bonet.U can For all the rest you can stick'em with Bitumen Strip for maximum satisfiying.My wira's is using this kind of thing oso.Save the RM and kick away the unwelcome nyek!nyek!sound.If u buy 3 get discount for Bitumen strip.


Waiting forward ur good response.Thanks in advanced.


Attached thumbnail(s)

Hi rsliew,

As requested , herewith attached the picture for viewing.Every 3"ft x 4ft" ( 10mm) is enough to stick ur front bonet.U can For all the rest you can stick'em with Bitumen Strip for maximum satisfiying.My wira's is using this kind of thing oso.Save the RM and kick away the unwelcome nyek!nyek!sound.If u buy 3 get discount for Bitumen strip.


Waiting forward ur good response.Thanks in advanced.

---

Added on April 2, 2008, 2:09 amHi junhe ,

pls check ur PM.tq

This post has been edited by wcg6548: Apr 2 2008, 02:09 AM

bro how many do i nid for 4 doors,back and front bonet?
im driving saga..thx alot~

how about my naza ria?

how much for sound proofing on it?

thank you.

good day.

how much is it to fix on waja?
front bonnet, rear boot, 4 doors and roofline?

how much improvement in soundproofing?
is it significant or barely noticable?

many thanks.

interested... PM me ur bank account will bank in 2morow...

4"ft x 3"ft 10mm

enuff for Wira bonnet rite???

excuse me do you have installation?

how much is it to fix on waja?
front bonnet, rear boot, 4 doors and roofline?

how much improvement in soundproofing?
is it significant or barely noticable?

PM me also, I may want it..

need more info... send me the pic

how much i need for iswara aeroback?

best price...?

already deal with seller a hour ago. good seller explain everything I need to know b4 I DIY

outside price more than RM150 thats why I quickly ask seller about the detail. really recommended for everyone

[quote=dhogold,Apr 4 2008, 09:35 PM]
need more info... send me the pic

how much i need for iswara aeroback?

best price...?

Hi dhogold,

Thank for the gud question.Herewith giving u example to fix the foam into your car for effective way , simple ,easy,more creative and of coz saving RM.

Foam function :-

1.Reduced / insulate heat from front engine bay.
2.Keep away nyek!nyek! sound from any assemble part / plastic in ur car.
3.Trap the sound (ice)/aircond cycle in ur car with out expensive accs.
4.Door will be smooth /tough when it open or closed.
5.Reducing noisy from outside.

For iswara :-

1pcs 10mm = front bonnet
1pcs 10mm = cabin floor
1pcs 10mm = 4door
1pcs 6mm or 10mm = spare tyre bay

For more "jitu /mantap" put Foil Strip for Marvelous result (altenative)...!!.

---

Added on April 5, 2008, 12:02 am[quote=dhogold,Apr 4 2008, 09:35 PM]
need more info... send me the pic

how much i need for iswara aeroback?

best price...?

[/quote]


Dear dhogold,

Pls check ur PM...many thank!

This post has been edited by wcg6548: Apr 5 2008, 12:02 AM

kelisa need how much for the whole car ?
mind pm me ??
thx alot

comes with self-adhesive?

ahh i was about to ask that.

interested in bitumen strip... wat is the width? got pics?

for satria how much? if i already last time sound proof my 2 door with bitumen, do i need to remove it? i hope i can get a whole mat...not bitumen stick here and stick there..... pm for me the bonnet of satria and the bonnet behind. thanks

can do installation for satria?

Can apply on this car?
Corolla Toyota EE80



This post has been edited by WaCKy-Angel: Apr 10 2008, 05:42 PM

hI yanjinowa,

i'm not provide the installation but it was so easy to stick it any car.Btw i can show u how to D.I.Y session.Call or sms at 013-3695674 /shukor anytime.Wat type of car ur u drive?

---

Added on April 11, 2008, 6:46 amHi WaCKy-Angel,

Thank for asking.Yes!U can apply to all type of car with this foam in just easy and simple D.I.Y.

TQ

This post has been edited by wcg6548: Apr 11 2008, 06:46 AM

How much if i just wanna stick it on my satria's rear panel (1 side only)? Tq.
*Panel is shown as the pic.


Attached thumbnail(s)

Moderation:

NO manual, free or indirect bump, use button instead. Read this.

More info about indirect bump here

*Anymore such posts after this and your thread will be subjected to closure

Hi shean,

thank for the question.U just need only 1pcs 6mm(rm30) or 10mm(rm45) depend wat is ur budget, but 1pcs can divide by 2.Simple way and easy to fix it.Just give a call and i can assist any information u need for free.tq

pls pm me the price for whole new saga car include roof,tq n tape

New picture just been updated.Happy viewing.

Hi bro, i am interested but like to find out more.
1) Can i stick the foam directly like the double sided tape? IF NOT, how to i stick it?
2) What is the usage for BITUMEN STRIP in sound proof?
3) May I have your photo on your DIY process step-by-step? Pls email to vincent@vu-mbaclub.com

Thanks!

Hi aVince,

I will reply ur question soonest.Btw wat car r u drive?

tq

cod with TS yesterday at Tesco Ampang.
After get back quickly install the foam, only 3 doors able to finish...
will continue this weekend.

TS is a reliable guy....giving me a good advise how to diy.

Some pic to show:


P/S: do inform me when the bitumen strip available & maybe will get another foam....

Thanks for your PM. Now i have clearer picture about the sound proof process.
I am driving Honda Civic Yr 94.

Dear necromencer a.k.a Mr Ben ,

Thank for your support.Will try to get the bitumen soonest b4 we meet again.Happy soundproofing.

---

Added on April 15, 2008, 2:41 pmHi aVince,

Just call or sms me if you need to get the foam anytime for meet point.

tq bro.

This post has been edited by wcg6548: Apr 15 2008, 02:41 PM

let me know how much in iswara aeroback..
what you mean in this..

Thickness .. 6mm (RM30) and 10mm (RM45)
Size .. 4"ft x 3"ft ( fit almost front bay bonet)
Color .. Black.


Supply also Bitumen Strip for great effected with Sound Proofing.

BITUMEN STRIP ( tape ) = RM 23 ( 10METER )


all is bitumen price?

It's a Synthetic Foam with 6mm & 10mm of thickness.

TS also selling Bitumen Strip 10m long per roll.
Thickness not so sure.

Maybe TS can explain a bit detail bout the bitumen strip.

Waiting for the bitumen strip....

Dear luffy82 ,

Pls give detail information that u need.Maybe i can provide u a guide or a simple answer.

Bitumen = RM 23
Long = 10 meter
Width = 50 mm

tq

---

Added on April 17, 2008, 5:16 pmBro necro ,

Ur information an explanation is highly much , much , much THANK U!

p/s c u for next bitumen delivery.Livin La Vida Loca.

This post has been edited by wcg6548: Apr 17 2008, 05:16 PM

my question is,
Synthetic Foam is do for what... ???

Bitumen Strip is do for what... ???

Hi luffy82..

Sorry for late replies but this is a good enough question and chat explanation =-

Synthetic Foam is do for what... ??? aka SuperLonThermal insulation materials are used primarily to insulate another material (or surface) to prevent or significantly reduce the thermal energy (heat) flow to preserve either hot or cold temperatures within the insulated material thus enabling energy and cost savings.

In addition, as thermal insulation is provided by covering the materials or surfaces required to be insulated with the thermal insulation materials chosen, depending on the type of insulation materials used and its application purpose, thermal insulation materials are also used to provide other secondary insulation purposes such as the following:-

to prevent condensation or frost formation on cooling systems and chilled water and refrigeration lines and thermal bridging;
acoustic, noise and vibration insulation;
shock absorption or as a cushioning material against physical or mechanical impact,
to conserve energy and costs and as a safety precautionary measure against unwanted accidents or damage;
protects items insulated from other environmental hazards such as salt water, sunlight or sunrays (ultra violet ("UV") attacks), oil and chemicals, dusts, settlement and growth of viruses, bacteria, moulds and fungi;
to withstand extremely high or low temperatures;
to provide fire resistance and a low smoke and toxic emissions in the event of fire;
to provide an aesthetic finishing look and to provide insulation without allergy or other harmful medical effects especially if used outdoors and subject to public viewing and contact; and
protects pipes from corrosion in the oil and gas and petrochemical industry.
Not all types of insulation materials can provide all of the above functions as it depends on the inherent nature or characteristics of the material whether it is suitable or not and whether such suitable material had underwent certain processes which would enhance its nature or characteristics and / or provide the material with such functions or ability required.

Bitumen Strip is do for what... ??? aka Bitumen Tape
A black bituminous compound covered by a reinforce aluminum film. It is a versatile self-adhesive tape for instant flashing applications. It is ready to apply, weatherproof, with outstanding durability and is economical.


Applications:
Protection: Asphalt, brickwork, concrete, fiber cement sheet, metal and plastic materials, roofs and covering etc.
Sealing & Waterproofing: Glass & plastic windows frames, parapets, skylight structures etc.
Repair Work: Metal and fiber cement sheet roofing, shingles, gutters and metal tube etc.

I hope u can understand what this thing can do.

Anyway.Thank u VERy - very much

WCG6548,
I am interested, but I need to know on the sticking process... is this foam self-adhesive or we require to have bitumen strips?

example, i'm planning to install under my front bonnet. Is it stickable straight away or need the bitumen?

TQ....

Hi keii-kun,

1st question :- My superlon is need CA glue /dunlop,camel or cap ayam glue tat can get with in any h/ware shop to stick it.fOR ur information the foam with self adhesive is not to strong when u stick it.Why!bcoz it will peel off if foam was directly hit by heat from ur engine heat or sun heating.With my foam u can put as many CA glue tat u want it.more strongest , cheap and duraballity.


2nd question :- Just put the CA glue without put the bitumen strip.Why!Bcoz bitumen will be leak and sticky if u put to this near to engine heating.No need to put Bitumen to ur engine bay area.tq

means CA glue is more than enough and ino need buy bitumen?

---

Added on April 21, 2008, 10:27 amwira bonnet n 4 door need how much foam n bitumen strip? if wanna install cabin floor , how ar, take out all the seat ar?

This post has been edited by waichee86: Apr 21 2008, 10:27 AM

Gud morning waichee86,

CA glue is needed during the sticking process but Bitumen Tape is only optional for make make the sound proof for door or rear bonnet , under seat is more solid.Most important part is Foam /Superlon and energy to DIY.hehe...but more greatest is our own SATISFACTION : )

Wira bonnet = 1pc 10mm (rm 45 ) is enough.Normally get extra after been cut.U can put under the passenger seat.Wasted to throw away.hehe

4 door = 2pcs 10mm can devide by 2 for 4 door.Bitumen ? just optional if ur want it more solid sound when open or closed the door.

Cabin Floor / Wira = 1pcs 10mm much better.

how ar, take out all the seat ar? :)gud question bro...depend ur energy or tool u have to take out the seat especially driver and co driver seat.Or just take out the back seat carpet as easy way to do without using any tool.
Btw where is ur location?

happy driving for proofing future proton

i m from setapak... actually i still don really un bout the flooring. juz take out back carpet? then front leh?

can post pic of the bitumen? y after add, the sound ll b more solid le?
sorry ar... noob here... lots of stupid question. hee.

Hi waichee86,

Dun worries...many question will get better result.btw we can meet as i'm from keramat.just pick time and location and we can meet.Anyway Bitumen and Superlon r different meaning and using.


tq

actually i really don un bout bitumen strip... can i c the pic? n the dimension pls...?

---

Added on April 22, 2008, 1:19 ami mean for 4 doors, front bonnet n floor, need how much bitumen strip?


This post has been edited by waichee86: Apr 22 2008, 01:19 AM

hi waichee86

Herewith attached picture of bitumen foil.Overall u just need 4 bitumen foil to stcik all those part ur mention above.

tq

1 more final question, dude.... wats the use of doin flooring for our car? how bout roof?

Yes waichee86,

Q: wats the use of doin flooring for our car? to absorb the noise from under / outside the car , much better aircond circulation , better bass and tweeter for who's loving sound accoustic from ICE part.

Q: how bout roof?kick off sound making by rain , heat from direct sun etc...as DIY this is only optional as need to taking out many part from screw nut and existing pvc plastic sticking on roof top.


tq...

why still din reply my message?

so, i confirm want it for
wira:
i) front bonnet. (1pcs of 10mm)
ii) 4 doors. (2 pcs 10mm and 2 roll bitumen)

isit correct? wats the best price... and pls bring extra coz after some chat wit u, i might want want extra... interested to do flooring and roof as well but don really understand... isit ok?

No problem bro...c u at 2pm tomorrow.

no best price?

No hal...as long happy.

juz bought 3 10mm superlon and 2 bitumen strip from this seller...
very good seller...
explain everything in great detail...
purposely take our door skin and seat to show me how to do...

creative seller...

juz order another superlon from him...

Great guy... recommended to everyone.

Million thanx!happy sound proofing....waichee86

why stil din reply me...
dun want sell me?

Hi luffy82,

1stly feel sorry for this...but thank for remind me.Btw if ur still in pls check ur PM.

Many thank!

Can do the installation for me? Btw my car is honda city, how much does you charge for the installation, whole car. THanks

How much needed to sound proof Iswara Sedan engine bay, bonnet + 4 doors.

---

Added on April 24, 2008, 9:15 amHow much needed to sound proof Iswara Sedan engine bay, bonnet + 4 doors.

This post has been edited by waklu9560: Apr 24 2008, 09:15 AM

Gud morning Fren !

Iswara Sedan :-

engine bay = 1pcs 10mm

bonnet = 1pcs 10mm

4 door = 2pcs 6mm can divide 2 each enough for 4 door

tq...

---

Added on April 24, 2008, 9:53 amHi AndyNoobie !

Thank for da gud question.Feel sorry coz i'm not provide the installation.But u can ask accs shop to do this installation...as DIY will save ur cost more a lot.

save driving bro!


This post has been edited by wcg6548: Apr 24 2008, 09:53 AM

any feedback from customer?

So far all customer give the good response and making 2nd time order...thanks for all buyer and supports.

when free to bring me the 6mm? hehe

bro me iswara aeroback,
pm me with postage to sarawak...

how much is it to fix on waja?
front bonnet, rear boot, 4 doors and roofline?

how much improvement in soundproofing?
is it significant or barely noticable?

PM me also, I may want it..

pm me if wanna do for inside myvi....

r u selling installation here?
how much u charge if install for waja?

Sorry bro...as i'm not provide the installation as mention at my sale advertise.Anyway it was easy to instal a.k.a DIY and saving more money.

---

Added on April 26, 2008, 11:31 pm6mm is now back in town.c u then at same place but not for shopping spree....hehehe

---

Added on April 26, 2008, 11:32 pmWill refer postage pricing with post offs.PM has been replies.tq bro

---

Added on April 26, 2008, 11:35 pmHi bro ,

how much improvement in soundproofing?
is it significant or barely noticable?========> how creative we are to DIY.sweat + energy = priceless.Tq for asking...

---

Added on April 26, 2008, 11:37 pmpm me if wanna do for inside myvi.... alway will be My Victory!yes u can bro..tq for asking

---

Added on April 27, 2008, 11:35 amGud morning to all LYN auto's member..

New update for COD location was been listed.Gigallion Thanks for support!

---

Added on April 27, 2008, 11:39 amGud morning to all LYN auto's member..

New update for COD location was been listed.Gigallion Thanks for support!




This post has been edited by wcg6548: Apr 27 2008, 11:39 AM

Do we need to put glue on it ar? Or does it already have glue?

Bought 10mm mat from seller the other day@MyDin. Used it for my open pod heatshield. DIY work! very satisfied with it.

You need to apply own glue to stick. For hot areas like engine bay, use those Dunlop glue sold at hardware shop. RM4-5 for a small bottle.

Hi mojam ,

Thanks for the question.The answer is Yes!we need to apply the glue 1st b4 stick to the metal area or plastic compartment.The foam with the 3M glue is aesy to peel off when it directly overheated directing from engine or sun.I was been used this product oso.As DIY u can put the glue very easy witin the brush.

Happy save driving

---

Added on April 27, 2008, 10:46 pmHi fooken,

Congratulation!U made it...btw ur cool with the little "mini's"Just to mention ++++too young but old skool++++.Keep up the way man!tq

This post has been edited by wcg6548: Apr 27 2008, 10:46 PM

I wana soundproof 4 doors for my daihatsu charade. How much and which should i take?

haha..never too old n never too young to play with cars! will get from u more when i start with my mini project!

Hi stupid6383,

All estimation price and consultation has been send.Pls check ur PM.TQ

---

Added on April 28, 2008, 11:11 pmHi fooken ...

Your on the right track man!Just call me for the mini project anytime...LIVING LA VIDA LOCA!

This post has been edited by wcg6548: Apr 28 2008, 11:11 PM

To TS,
i would like to know this too,
becoz kinda lazy to read all reply
or
you can PM me related on it.
thank you so much !

cod with TS yesterday for 2 roll of bitumen strip.

Million Thanz to Mr Ben aka necromencer for the great support!Sorry as i'm rushing that night.Anyway the "isotonic drink" make me feel better.Thank again bro.

juz install it for my bront bonnet today, not bad.. really absorb sound... much quieter.... even my gf like it... got time, do the 4 doors n rear bonnet...

heheh...overnight rite!so u need be faster respond when drive coz sumetimes neverheard "police siren" behind u...

how much for waja bonnet only and bonnet + 4 doors and how efficiency it is if compare with sound proof mat?
plz send me estimation price and consultation

Hi rigaries,

Thank for asking.Anway pls check ur PM as was replies already.cheeeze!

?????

pm me the best price to for proton iswara a/b.

where can i see the result of the soundproofing????

how much i need for car boot?

please pm me how many set i need for my perdana v6
Bonnet, rear bonnet and spare tyre conparment..
donno how to dissemble car door thats why dont wanna diy for 4 door
thanks

will it melt as this>>>http://forum.lowyat.net/topic/688751
if it wont,i am interested

u see the gaps in between the bitumen strips.
it should be stick it side by side, means leave no gaps.
and need to cover with a layer of superlon aka sythetic foam.

Hi MichaelTKW...tq for the question.Pls check ur PM for further info's.tq

---

Added on May 6, 2008, 11:34 amHi farris , gud imagination rite?soundproofing???? can't feel but can hear more or better than b4.tq

---

Added on May 6, 2008, 11:36 amGud Morning ykmy ,

Car boot - 1pcs 10mm or 6mm ( depend by ur budget or requirement) enough to cover all square area.

---

Added on May 6, 2008, 11:39 amPM has been replies.Many thanz!

---

Added on May 6, 2008, 12:46 pmHi
Herewith attach the function and information about the Bitumen.
Bitumen Information :

Size:50mm Width x 10 Meter Length
Thickness 1.5mm

This Black bituminous compound consists of self adhesive polymer modified bitumen layer coated on to a tough high density polyethylene film and covered by an aluminium foil.
It is economical, cold applied instant flashing tape which is ready to use to waterproof with outstanding durability. VitalBand provides excellent adhesion, improved heat resistance, tear and puncture resistance, and chemical resistance to chlorides, sulphates, alkalis and acids.
Applications:
Protection: Asphalt, brickwork, concrete, fiber cement sheet, metal and plastic materials, roofs and covering, etc.
Sealing & Waterproofing: Glass & plastic windows frame, parapets, skylight structures etc.
Repair Work: Metal and fiber cement sheet roofing, shingles, gutters and metal tube etc.
VitalBand is generally used as waterproofing and damp proofing membranes intended for concrete protection. It may be used for horizontal and vertical application and as a damp proof course for tanking below ground structure, subways and retaining walls.

Specification & Properties:
APPEARANCE BLACK TAPE
SURFACE PE COATED ALUMINIUM
ODOR ASPHALT ODOR
ROLL LENGTH 10 M
ROLL WIDTH 50 mm
THICKNESS 1.5 mm
SOFTENING POINT (ASTM D36) 110�C
ADHESION STRENGHT (ASTM D1000) 2.4 N/mm
PUNCTUAL RESISTANCE (ASTM E154) 220 N
CRACK BRIDGING ABILITY (ASTM C836) 1 mm
TENSILE STRENGHT
MEMBRANE (ASTM D638) 2500 KPa
FILM (ASTM D638) 23 MPa
ELONGATION (ASTM D638) 300%
ENVIRONMENTAL RESISTANCE (ASTM D543) PASS
WATER ABSORPTION (ASTM D570) 0.02 % AFTER 24 HOUR

---

Added on May 6, 2008, 12:52 pmHehehe ...everyday u always been pro's not look alike.So how the bitumen project?Anyway thanks for the good support...

This post has been edited by wcg6548: May 6 2008, 05:54 PM

fuhhh ....it's not easy to get it done, manage to finish 2 doors last weekend,
but really worth it, reduces the irritating wind sound while moving.
But the great thing is when i closed the door...yikes....sound really better
then b4....

thnks shukor for bring in this product at very reasonable price.....

Ur'welcome bro.

---

Added on May 7, 2008, 12:27 pmDear LYN Auto Member....

New picture for Door Trim and Fender Plastic Cover will upload soonest.tq

This post has been edited by wcg6548: May 7 2008, 12:27 PM