D.I.Y aka Do It Yourself sound proofing / heat insulate. Just stick the Foam to your
cars.These are the material from Synthetic Foam to use on the front car bonet.

SUITABLE for all cars.

Worth your money to buy this HIGH QUALITY product.
Why risk to buy a low quality just to save a few ringgit that has no effect?
Just use a 10mm or 6mm of this HIGH QUALITY
product to get the same result with a minimum space in tight and small area..


1) Reduces external noise, vibration & harshness (NVH).

2) Enjoy improved clarity, loudness & bass response from your car stereo.

3) Reduces engine, transmission, exhaust & raindrop ringing noise intrusions.

4) Protects paintwork from engine heat damage & battery acid fume damage.

5) High performance/luxury car insulation and look when applied on the bonnet.

6) Dampens buzzing vehicle parts & eliminates “tin can” body panel ringing.

7) Weather durable and has excellent ozone & ultra-violet resistance.

8) Resistant to mildew & all automotive chemicals/fluids including battery acid.

9) Ozone friendly, hypoallergenic, waterproof & washable.

10)Flexibility & adhesive coating makes installation fast and easy.

11)Ability to withstand temperature ranges between -40°C to 105°C and
has a self-extinguishing fire rating.


.
Thickness & Price

[1. 6mm(1/4inch)= RM25 W/out Adhasive

2. 10mm(3/8inch)=RM35 W/out Adhasive

3. 6mm( 1/4inch)=RM45 SELF Adhasive - now rm40 while stock last

4. 10mm (3/8inch) = RM55 SELF Adhasive - now rm50 while stock last

5. 1/2 rolls 4"ft x 15"ft (6mm) w/out adhasive = RM99 for 1/2 rolls untill end of this month!Grab it fast

6.1/ 2 rolls 4'ft x 15'ft (10mm) w/out adhasive =RM150 for 1/2 rolls untill end of this month!Grab it fast



Dimension

4"ft x 3"ft ( Fit almost front engine bonet)

1 pieces fitted for 2doors


Pls PMed for INQUIRY :-

1 roll 4"ft x 30"ft (6mm) w/out self adhasive = poa

1 roll 4'ft x 30'ft (10mm) w/out self adhasive =poa

1 roll 4'ft x 30'ft (6mm) adhasive = poa

1 roll 4'ft x 30'ft 10mm (3/8inch) adhasive = poa


Recommended to use on :
1. Doors(Dootrims/Door Panel)
2. Front bonnet
3. Rear trunk lid
4. Boot floor and walls
5. Floor pan
6. Front fender / wheel arch
7. Roof Liner
8. Engine firewall from engine(best result)



Quick Info's ~ NO installation PROVIDED!

List of COD location :-


1.Petronas Tesco Ampang
2.Giant Melawati
3.Petronas Melati
4.Shell next to Carrefour W/maju
5.Setiawangsa Lrt Station

Note :
*Minimum Order For Postage is 3 Sheet(9ft)
*Postage cost is paid by buyer
*Postage is through Pos Malaysia E-Parcel,will be delivered within 1 week
after payment is confirmed
*Dunlop GP Adhesive/Dunlop CA Adhesive can be used as adheshive as it just rm10-20 per can..combine all cost,it's a cheap DIY..

Contact method:
1) PM here
2) E-mail: wcg6548@gmail.com
3) Whatsapp,SMS,WeChat to 0133695674 please state your NICKNAME. (FAST DEAL)

This post has been edited by wcg6548: Dec 26 2013, 12:16 AM


Attached thumbnail(s)


Attached image(s)

Hi andychee81,

As requested , herewith attached the picture for viewing.Every 3"ft x 4ft" ( 10mm) is enough to stick ur front bonet.U can For all the rest you can stick'em with Bitumen Strip for maximum satisfiying.My wira's is using this kind of thing oso.Save the RM and kick away the unwelcome nyek!nyek!sound.If u buy 3 get discount for Bitumen strip.


Waiting forward ur good response.Thanks in advanced.


Attached thumbnail(s)

Hi rsliew,

As requested , herewith attached the picture for viewing.Every 3"ft x 4ft" ( 10mm) is enough to stick ur front bonet.U can For all the rest you can stick'em with Bitumen Strip for maximum satisfiying.My wira's is using this kind of thing oso.Save the RM and kick away the unwelcome nyek!nyek!sound.If u buy 3 get discount for Bitumen strip.


Waiting forward ur good response.Thanks in advanced.

---

Added on April 2, 2008, 2:09 amHi junhe ,

pls check ur PM.tq

This post has been edited by wcg6548: Apr 2 2008, 02:09 AM

[quote=dhogold,Apr 4 2008, 09:35 PM]
need more info... send me the pic

how much i need for iswara aeroback?

best price...?

Hi dhogold,

Thank for the gud question.Herewith giving u example to fix the foam into your car for effective way , simple ,easy,more creative and of coz saving RM.

Foam function :-

1.Reduced / insulate heat from front engine bay.
2.Keep away nyek!nyek! sound from any assemble part / plastic in ur car.
3.Trap the sound (ice)/aircond cycle in ur car with out expensive accs.
4.Door will be smooth /tough when it open or closed.
5.Reducing noisy from outside.

For iswara :-

1pcs 10mm = front bonnet
1pcs 10mm = cabin floor
1pcs 10mm = 4door
1pcs 6mm or 10mm = spare tyre bay

For more "jitu /mantap" put Foil Strip for Marvelous result (altenative)...!!.

---

Added on April 5, 2008, 12:02 am[quote=dhogold,Apr 4 2008, 09:35 PM]
need more info... send me the pic

how much i need for iswara aeroback?

best price...?

[/quote]


Dear dhogold,

Pls check ur PM...many thank!

This post has been edited by wcg6548: Apr 5 2008, 12:02 AM

hI yanjinowa,

i'm not provide the installation but it was so easy to stick it any car.Btw i can show u how to D.I.Y session.Call or sms at 013-3695674 /shukor anytime.Wat type of car ur u drive?

---

Added on April 11, 2008, 6:46 amHi WaCKy-Angel,

Thank for asking.Yes!U can apply to all type of car with this foam in just easy and simple D.I.Y.

TQ

This post has been edited by wcg6548: Apr 11 2008, 06:46 AM

Hi shean,

thank for the question.U just need only 1pcs 6mm(rm30) or 10mm(rm45) depend wat is ur budget, but 1pcs can divide by 2.Simple way and easy to fix it.Just give a call and i can assist any information u need for free.tq

New picture just been updated.Happy viewing.

Hi aVince,

I will reply ur question soonest.Btw wat car r u drive?

tq

Dear necromencer a.k.a Mr Ben ,

Thank for your support.Will try to get the bitumen soonest b4 we meet again.Happy soundproofing.

---

Added on April 15, 2008, 2:41 pmHi aVince,

Just call or sms me if you need to get the foam anytime for meet point.

tq bro.

This post has been edited by wcg6548: Apr 15 2008, 02:41 PM

Dear luffy82 ,

Pls give detail information that u need.Maybe i can provide u a guide or a simple answer.

Bitumen = RM 23
Long = 10 meter
Width = 50 mm

tq

---

Added on April 17, 2008, 5:16 pmBro necro ,

Ur information an explanation is highly much , much , much THANK U!

p/s c u for next bitumen delivery.Livin La Vida Loca.

This post has been edited by wcg6548: Apr 17 2008, 05:16 PM

Hi luffy82..

Sorry for late replies but this is a good enough question and chat explanation =-

Synthetic Foam is do for what... ??? aka SuperLonThermal insulation materials are used primarily to insulate another material (or surface) to prevent or significantly reduce the thermal energy (heat) flow to preserve either hot or cold temperatures within the insulated material thus enabling energy and cost savings.

In addition, as thermal insulation is provided by covering the materials or surfaces required to be insulated with the thermal insulation materials chosen, depending on the type of insulation materials used and its application purpose, thermal insulation materials are also used to provide other secondary insulation purposes such as the following:-

to prevent condensation or frost formation on cooling systems and chilled water and refrigeration lines and thermal bridging;
acoustic, noise and vibration insulation;
shock absorption or as a cushioning material against physical or mechanical impact,
to conserve energy and costs and as a safety precautionary measure against unwanted accidents or damage;
protects items insulated from other environmental hazards such as salt water, sunlight or sunrays (ultra violet ("UV") attacks), oil and chemicals, dusts, settlement and growth of viruses, bacteria, moulds and fungi;
to withstand extremely high or low temperatures;
to provide fire resistance and a low smoke and toxic emissions in the event of fire;
to provide an aesthetic finishing look and to provide insulation without allergy or other harmful medical effects especially if used outdoors and subject to public viewing and contact; and
protects pipes from corrosion in the oil and gas and petrochemical industry.
Not all types of insulation materials can provide all of the above functions as it depends on the inherent nature or characteristics of the material whether it is suitable or not and whether such suitable material had underwent certain processes which would enhance its nature or characteristics and / or provide the material with such functions or ability required.

Bitumen Strip is do for what... ??? aka Bitumen Tape
A black bituminous compound covered by a reinforce aluminum film. It is a versatile self-adhesive tape for instant flashing applications. It is ready to apply, weatherproof, with outstanding durability and is economical.


Applications:
Protection: Asphalt, brickwork, concrete, fiber cement sheet, metal and plastic materials, roofs and covering etc.
Sealing & Waterproofing: Glass & plastic windows frames, parapets, skylight structures etc.
Repair Work: Metal and fiber cement sheet roofing, shingles, gutters and metal tube etc.

I hope u can understand what this thing can do.

Anyway.Thank u VERy - very much

Hi keii-kun,

1st question :- My superlon is need CA glue /dunlop,camel or cap ayam glue tat can get with in any h/ware shop to stick it.fOR ur information the foam with self adhesive is not to strong when u stick it.Why!bcoz it will peel off if foam was directly hit by heat from ur engine heat or sun heating.With my foam u can put as many CA glue tat u want it.more strongest , cheap and duraballity.


2nd question :- Just put the CA glue without put the bitumen strip.Why!Bcoz bitumen will be leak and sticky if u put to this near to engine heating.No need to put Bitumen to ur engine bay area.tq

Gud morning waichee86,

CA glue is needed during the sticking process but Bitumen Tape is only optional for make make the sound proof for door or rear bonnet , under seat is more solid.Most important part is Foam /Superlon and energy to DIY.hehe...but more greatest is our own SATISFACTION : )

Wira bonnet = 1pc 10mm (rm 45 ) is enough.Normally get extra after been cut.U can put under the passenger seat.Wasted to throw away.hehe

4 door = 2pcs 10mm can devide by 2 for 4 door.Bitumen ? just optional if ur want it more solid sound when open or closed the door.

Cabin Floor / Wira = 1pcs 10mm much better.

how ar, take out all the seat ar? :)gud question bro...depend ur energy or tool u have to take out the seat especially driver and co driver seat.Or just take out the back seat carpet as easy way to do without using any tool.
Btw where is ur location?

happy driving for proofing future proton

Hi waichee86,

Dun worries...many question will get better result.btw we can meet as i'm from keramat.just pick time and location and we can meet.Anyway Bitumen and Superlon r different meaning and using.


tq

hi waichee86

Herewith attached picture of bitumen foil.Overall u just need 4 bitumen foil to stcik all those part ur mention above.

tq

Yes waichee86,

Q: wats the use of doin flooring for our car? to absorb the noise from under / outside the car , much better aircond circulation , better bass and tweeter for who's loving sound accoustic from ICE part.

Q: how bout roof?kick off sound making by rain , heat from direct sun etc...as DIY this is only optional as need to taking out many part from screw nut and existing pvc plastic sticking on roof top.


tq...

No problem bro...c u at 2pm tomorrow.

No hal...as long happy.

Million thanx!happy sound proofing....waichee86

Hi luffy82,

1stly feel sorry for this...but thank for remind me.Btw if ur still in pls check ur PM.

Many thank!