hey thats a very nice finish u have there

mind to tell what sand paper grit u used all the way?

ya la tell me too..quite intrstd too lapping..hehe...

Actually im just follow the tip and step by step technique here on this forum,, but i don remind where the thread is,
but for u all guys info im using sand paper grit: 1st 800, 2nd 1500 and last for the shining use the 2000 grit... some places it is hard to find these grit value.. hope u guys can do it and xperience the temp drop about 4 or myb 8 celcius...

---

Added on July 2, 2008, 11:35 pmAnd another thing i forgot to mention: do this lapping on a plain surface, such a wide glass and do it on a steady table.. secure the grit paper with a tape.. spill a little bit of water on grit paper and start ur dancing... hehe. U can either lapping in a circle o even in a straight line.. ur call. Do it untill u feel the resistent reduce.. after that, just repeat the step with another grit paper. But remember start lapping w the lowest value of the grit paper like 800 then 1500 and last 2000...
hope can help u guys..

This post has been edited by Mavrix: Jul 2 2008, 11:37 PM

Friendly reminder not to exccesively lap the cooler, start wit max 800/1000 grit, do not use 600, lap too much u can kiss ur cooler bb with its heatpipe punctured. Too smoothly lap, add a mix of soap n water, n put little by little onto sandpaper. Off topic ady la

wah thanks bro..cnt wait edi to lapped my bibi..huhu..hope cn shine as urs..how long it take time when ur lapped bro??..

I guess its depend how cocentrate u doin it bro.. hehe myb bout 2hrs..

The best time to lap is when u sitting in front tv or com, watch show . . . then u lap, not so boring . . . dont put pressure on cooler when lapping, just slide it across the sandpaper wit the cooler's weight only. 2hrs damn semangat. I only 1 hr.

1hrs? wau thats fast.. hehe.. anyway the result is better heat transfer of my cpu...now idle temp is at 30/35 for my OC E6600 @ 3.2Ghz.... Ok la kan?

haha, no patience . . . 1 day 1 hr . . . next day same also. Means like u 2hrs sry forgot 2 mention b4. I still havent try my cooler, this fri most probably.

ooo i see.. hehe

haha..thanks to both of u..really got different lor aftr lappng..cnt wait anymore..hee..

So hows is it? Done the lapping eh? Get positive result?

haha..u thnk i will do it nw ka..mayb weekend i will do it leh..wan to buy the sand paper 1st..

kindly let me know your result before and after lapping?maybe pictures of lapping process if ure kind enough

ok no prblm then..u cn pm mavrix aso he hav done it..i not sure my result will same as mavrix...

lol two hours?
I lapped two S1283 few months ago also no need so long.

advice: use 1000, 1500 and 2000grit sandpaper.

Just tried my cooler . . . not bad, idles at core1=49 core2=42, avg 47. Load core1=58 core2=54. Running 6000+ 3.96mhz, 283x12, 1.55 vcore. Stable for 30 mins

Don no bout the amd limit temp but i see u can run at 3.9Ghz w/out exceed temp more than 60celcius.. thats ok i think...
But still i cannot get my e6600 more than 3.2ghz... not stable.. even set the vcore to 1.425v it still cannot reach 3.3 or 3.4ghz.. well, i guess i just stick to 3.2 for this time being..
But still this cooler has done it job great! Not a mistake when bought it.. hehehe

haha, my mistake, running 3.39 only, not 3.9 Not bad for me, now must buy fm123 n try.

OO i see.. hehe thats still ok la bro.. know where to get that fan?