Done installed this cooler in my rig... hehe


also done lapped the cooler base.. pretty ok la kan? not very perfect lah..
but i manage to get idle temp at 32/38`C for my OC E6600@3.2Ghz, and 39/45`C at 100% load. Using coretemp beta 0.99
theres improvement from my late hypertx..hehe



how its look on my p5n-e sli mobo...

for now im satisfied, thanx to any who sudjest this cooler, not to xpensive an not very bad on the performance...


*bought from bro prodigous

Thanx bro, really worth it lapped the cooler.. more heat dissipate n efficient.. next project: try to laping the proc.. hehehe

Actually im just follow the tip and step by step technique here on this forum,, but i don remind where the thread is,
but for u all guys info im using sand paper grit: 1st 800, 2nd 1500 and last for the shining use the 2000 grit... some places it is hard to find these grit value.. hope u guys can do it and xperience the temp drop about 4 or myb 8 celcius...

---

Added on July 2, 2008, 11:35 pmAnd another thing i forgot to mention: do this lapping on a plain surface, such a wide glass and do it on a steady table.. secure the grit paper with a tape.. spill a little bit of water on grit paper and start ur dancing... hehe. U can either lapping in a circle o even in a straight line.. ur call. Do it untill u feel the resistent reduce.. after that, just repeat the step with another grit paper. But remember start lapping w the lowest value of the grit paper like 800 then 1500 and last 2000...
hope can help u guys..

This post has been edited by Mavrix: Jul 2 2008, 11:37 PM

I guess its depend how cocentrate u doin it bro.. hehe myb bout 2hrs..

1hrs? wau thats fast.. hehe.. anyway the result is better heat transfer of my cpu...now idle temp is at 30/35 for my OC E6600 @ 3.2Ghz.... Ok la kan?

ooo i see.. hehe

So hows is it? Done the lapping eh? Get positive result?

Don no bout the amd limit temp but i see u can run at 3.9Ghz w/out exceed temp more than 60celcius.. thats ok i think...
But still i cannot get my e6600 more than 3.2ghz... not stable.. even set the vcore to 1.425v it still cannot reach 3.3 or 3.4ghz.. well, i guess i just stick to 3.2 for this time being..
But still this cooler has done it job great! Not a mistake when bought it.. hehehe

OO i see.. hehe thats still ok la bro.. know where to get that fan?

Confirm!! i'll get that fans next month
hehe